For all your test equipment requirements

Extech MA410 400A AC Clamp Meter + NCV

Extech logo

AC Clamp-on meter with Integrated Non-Contact Voltage Detector

To quickly check for the presence of live wires before testing plus 40A and 400A current ranges.


  • AC Current, AC/DC Voltage, Resistance, Frequency, Capacitance, Temperature, Duty Cycle, Diode and Continuity
  • Integrated Non-Contact Voltage Detector with LED alert
  • Compact size allows measurments in tight locations
  • 30mm jaw size for conductors up to 350MCM
  • Relative Mode for Capacitance Zero and Offset Adjustment
  • Data Hold and Auto Power Off
  • Complete with test leads, general purpose Type K temperature probe, two AAA batteries, and carrying case

Authorised Australian Distributor

CE   CAT III   1 Year

If you would like more information regarding this product, simply email us here.
  • This field is for validation purposes and should be left unchanged.
SKU: Extech MA410 Category: Tags: ,

The Extech MA410 AC clamp meter features a built-in, non-contact voltage detector, with LED alert, and offers a basic accuracy of 2.5%. It also offers a DC voltage range of 0.1mV to 600V and an AC voltage range of 1mV to 600V. This Extech clamp meter’s compact size allows you to take measurements in tight locations.

Other features of the Extech MA410 AC clamp meter include a 30mm jaw size for conductors up to 500MCM, relative mode for capacitance zero and offset adjustment, data hold, MIN/MAX and auto power off. The MA410 offers 9 different multimeter functions, including: AC/DC Voltage, resistance, capacitance, frequency, temperature, duty cycle, diode, and continuity.

This Extech clamp meter comes complete with test leads, temperature probe (-30 to 300°C), two AAA batteries, and carrying case.

Data Hold

To freeze the LCD reading, press the HOLD button. The HOLD icon appears on the LCD. Press the HOLD button again to return to normal operation.


Press the REL button (REL will appear in the display) to zero the reading and create a reference point. All future reading will be the difference between the actual reading and the stored “REL” reading. In the REL mode, autoranging is disabled and measurements are limited to the range active when the REL button was pressed. Press the REL button to exit the mode. Note: Relative does not function in Frequency or Duty Cycle mode.

Automatic Power Off

In order to conserve battery life, the meter will automatically turn off after approximately 30 minutes. To turn the meter on again, change the position of the function switch.

Low battery indication

When the icon appears in the display, the battery should be replaced. Refer to the battery replacement procedure in the maintenance section.


Display counts 4000
AC Current 0.01A to 400.0A
Basic Accuracy (ACA) 2.5%
DC Voltage 0.1mV to 600V
AC Voltage 1mV to 600V
Resistance 0.1Ω to 40.00M
Frequency 1Hz to 10kHz
Capacitance 0.01nF to 100.0μF
Temperature -20 to 760°C
Duty Cycle 0.1 to 99.9%
Diode Yes
Continuity Yes
Dimensions 200x66x37mm
Weight 205g


There are no reviews yet.

Be the first to review “Extech MA410 400A AC Clamp Meter + NCV”