For all your test equipment requirements

HT Italia T2000 Clamp on Ground Resistance Tester

HT_Italia_Ca

T2000 clamp is specially developed to evaluate resistance of earth rods with no need to disconnect any part of the system (STAKELESS METHOD)

The inner part of the device is made of 2 jaws, one for current reading and the other for voltage generation. The voltage jaws generate a potential (E) on the loop during resistance (R) measurement. A current (I) is consequently generated on the loop and is measured by the current jaws. Based on the value of parameters E and I, the instrument displays the resistance R value calculated as their ratio. The value measured by the device can be used in case the single rods do not influence each other. T2000 also measures AC current up to 20A and leakage current with resolution 0.05mA. This device complies with standard IEC/EN61010-1 in CAT III 150V and it is the ideal solution for measurements to be carried out both in private and in industrial environments.

WARRANTY 3

logopdf (2) T2000 Data Sheet

If you would like more information regarding this product, simply email us here.
  • This field is for validation purposes and should be left unchanged.
SKU: HT Italia T2000 Categories: , Tags: ,

HT Italia T2000 Earth Ground Clamp Meter

The T2000 model is designed for the resistance measurement on earth probes with ground loop method without the disconnection of parts of plants under test. This type of measurement carried out by the instrument can be used for evaluation of single rods’ resistances within an earth installation assuming they do not affect each other. The inner part of the instrument is made of 2 jaws one for current and one for voltage. The voltage jaw generates a potential (E) on the loop during resistance measurement. A current (I) is consequently generated on the loop and is measured by the current jaw. Based on the value of parameters E and I the instrument displays the resistance value R calculated as their ratio. The T2000 also performs AC current up to 20A and leakage current with 0.05mA resolution and the setting of alarm thresholds on measurements is possible. The instrument is in compliance with IEC/EN61010-1, CAT III 150V and is ideal to carry out easily measurements both in domestic and industrial environments.

T2000 model is designed for the resistance measurement on earth probes with ground loop method without the disconnection of parts of plants under test. This type of measurement carried out by the instrument can be used for evaluation of single rods’ resistances within an earth installation assuming they do not affect each other. The inner part of the instrument is made of 2 jaws one for current and one for voltage. The voltage jaw generates a potential (E) on the loop during resistance measurement. A current (I) is consequently generated on the loop and is measured by the current jaw. Based on the value of parameters E and I the instrument displays the resistance value R calculated as their ratio. The T2000 also performs AC current up to 20A and leakage current with 0.05mA resolution and the setting of alarm thresholds on measurements is possible. The instrument is in compliance with IEC/EN61010-1, CAT III 150V and is ideal to carry out easily measurements both in domestic and industrial environments.

Features:

  • Resistance measurement on earth probes with ground loop method
  • Direct measurement on earth probes without any cable breaking
  • Measurement of leakage current on earth installations
  • Setting of alarm thresholds on measurements with buzzer
  • Storage of measurement results
  • Detection of current noise on measurement
  • Data HOLD function
  • Backlight
  • Auto Power OFF

Specifications

Mechanical characteristics
Dimensions (L x W x H) 293 x 90 x 66mm
Weight (including battery) 1320g
Max conductor size 32mm
Supply
Battery type 4 x1.5V alkaline LR6 AA MN1500
Auto power OFF about 5 minutes of idleness
Display
Characteristics 4 LCD, sign and decimal point with backlight
Sample rate 1 times/sec
Internal memory
Memory capacity 99 locations
Climatic conditions
Reference temperature 20°C +/- 3°C
Operating temperature 0 – 40°C
Operating humidity 10%RH – 90%RH
Reference standards
Comply with IEC/EN 61010-1, IEC/EN61010-2-032
Insulation double insulation
Pollution degree 2
Max height of use 2000m
Installation category CAT III 150V to ground, max 20A

Reviews


There are no reviews yet.

Be the first to review “HT Italia T2000 Clamp on Ground Resistance Tester”