For all your test equipment requirements

HT Italia I-V400w I-V Curve tracer for PV installations

HT Italia Logo

The HT Italia I-V400w is a Multifunction device for maintenance and troubleshooting of photovoltaic systems.

HT Italia I-V400w allows field detection of I-V Curve an of the main characteristic parameters both of a single module and of strings of modules for PV installations up to a maximum of 1000V and 10A. For measuring I-V Curve, HT Italia I-V400w manages an internal database of the modules, which can be updated at any time by the user and comparison between the measured data with the rated values allows immediately evaluating whether the string or the module fulfills the efficiency parameters declared by the manufacturer. I-V Curve can be measured also by decentralizing measurement of irradiation and temperature by using the optional remote unit SOLAR02, using the radio frequency connection (RF) with the master unit.
Also for HT Italia I-V400w, the display at the end of the test of I-V Curve is a clear indication about the compliance with the specifications declared by the panel manufacturer.

  • Measurement of I-V Curve of one or more modules or of one whole string uo to 1000V/15A
  • Measurement of open-circuit voltage and short-circuit current Voc/Isc
  • Database of 30,000 selectable photovoltaic modules
Authorised Australian Distributor
WARRANTY 3
PDF Logo    I-V400w datasheet
PDF Logo    HT Italia I-V400w brochure
If you would like more information regarding this product, simply email us here.
  • This field is for validation purposes and should be left unchanged.
SKU: HT Italia I-V400w Categories: , Tags: ,

HT Italia I-V400w I-V Curve tracer for PV installations

HT Italia I-V400W IV Curve tracer of Solar PV strings and modules is the ideal solution for the ordinary and scheduled maintenance of photovoltaic systems. Measures, together with the IV characteristic of the device being tested, also the values of its temperature and incident irradiation.

The HT Italia I-V400w I-V curve tracer is the ideal solution for the ordinary and scheduled maintenance of photovoltaic systems. With the HT Italia I-V400w I-V curve tracer, searching for possible failures and problems in systems is extremely rapid, efficient and intuitive. The HT Italia I-V400w I-V curve tracer carries out the field measurement of the IV characteristic and of the main characteristic parameters both of a single module and of module strings. The instrument measures, together with the IV characteristic of the device being tested, also the values of its temperature and incident irradiation.
The acquired data are then processed to extrapolate the IV characteristic at standard test conditions (STC) in order to proceed with the comparison with the nominal data declared by the modules’ manufacturer, thus immediately determining whether or not the string or the module being tested respects the characteristics declared by the manufacturer. Output current or voltage from the module or string is measured with the 4-terminal method, which allows extending the measurement cables without requiring any compensation for their resistance, thus always providing accurate and precise measures.
In its internal memory, HT Italia I-V400w I-V curve tracer manages a database of photovoltaic modules, which can be updated at any time both via the management software and directly on the instrument. Together with the measurement of the IV characteristic and the extrapolation of the characteristic at standard test conditions, IV 400 compares the obtained values with the values declared by the manufacturer, immediately providing the OK / NO result of the test. The operator must not do any calculation, nor any difficult operation. The instrument carries out the comparison rapidly and automatically

HT Italia I-V400w High Lights:

Measurement of output voltage from module/string up to 1000V DC
Measurement of output current from module/string up to 15A DC
128 I-V curve points in Std or Capacitive mode
Measurement Voc-Isc-Pmax-Vmpp-Impp-Fill Factor
Measurement of solar irradiation [W/m2] with reference cell
Measurement of temperature, automatic or by means of probe PT1000
Measurement of output DC and nominal power from module/string
Numerical and graphical display of I-V characteristic
Measurement of the resistance of photovoltaic module series
Mechanical inclinometer for incidence angle of solar irradiation
4-terminal measuring method
Comparison with standard conditions (STC 1000 W/m2, 25C)
Evaluation of testing result: OK / NO
Management of up to 30 types of modules in the internal database (up to 30.000 upgradeable by software)
Internal memory for data saving
Recalling results on the display
Optical/USB port for PC connection
Help on line on the display

KITGSC4 : Set 4 cables + 4 alligator clips
KITPVMC3 : Set of 2 adapters MC3 compliance
KITPVMC4 : Set of 2 adapters MC4 compliance
HT304N : Reference cell for radiation measurements
M304 : Mechanical inclinometer
TOPVIEW2006 : Windows software + optical/USB cable C2006
BORSA2051 : Soft carrying bag
ISO9000 calibration certificate
User manual

HT Italia I-V400w Functions:
Detection of I-V curve on PV modules and strings  Yes
Quick IVCK test for measuring Voc and Isc on PV modules and strings VOC / ISC
Use of remote unit SOLAR-02 with USB \ RF connection RF
Measurement of irradiation with reference cell  Yes
Temperature measurement of cell and environment  Yes
Summary table of main electric parameters  Yes
Measuring range of I-V curve / VOC-ISC 1000V / 15A
Measurement category CAT III 300V
Backlit LCD display  Yes
Internal memory capacity 200 I-V Curves
Provided PC interface with software for Windows  Yes
Custom management of internal PV module database 30 internal / 30.000 on software
Integrated WiFi For data download onto the PC
Auto power off  Yes
Help on line on the display  Yes
Size (LxWx H) (mm) 235 x 165 x 75mm
Weight in grams (batteries included) 1200

HT Italia HT Italia I-V400w conforms to the following Standards:

  • EMC 2004/108/CE Directive
  • LVD 2006/95/CE Directive
  • IEC/EN 61010-1
  • IEC/EN61187
  • CE MARK
  • EMC: IEC/EN61326
  • IEC/EN60891

Reviews


There are no reviews yet.

Be the first to review “HT Italia I-V400w I-V Curve tracer for PV installations”