For all your test equipment requirements

TENMARS TM-901N LAN Cable Tester

Tenmars_logo_05

TENMARS TM-901N  LAN Cable Tester Features/Benefits

  • LCD display with automatic backlight.
  • Detect opens, shorts, miswires and split pairs on twisted pair cabling.
  • Displays graph wiremap, opens, shorts, miswires, split pairs and remote ID numbers all on one screen.
  • Identify remote ID number on one pair only.
  • Measures distance.
  • Using multiple remote ID numbers up to 8 locations.
  • Auto shutoff.
  • Low battery detector.

Included accessories:

  • User’s manual
  • 9 volt battery
  • one 20cm CAT5 FTP cable
  • remote ID and one locator.

Authorised Australian Distributor

WARRANTY 3

If you would like more information regarding this product, simply email us here.
  • This field is for validation purposes and should be left unchanged.
SKU: TENMARS TM-901N Categories: , Tags: , ,

The Tenmars TM-901N has a backlit LCD screen displays graph wire-map, opens, shorts, miswires, split pairs and the remote ID number all on one screen.  Using multiple remote ID up to 8 locators to test on RJ-45 (UTP, STP) LAN cable.

Safety Precaution

Do not operate the meter under the environment with explosive gas (material), combustible gas (material) steam or filled with dust. z In order to avoid reading incorrect data, please replace the battery immediately when the symbol “ ” appears on the LCD.

In order to avoid the damage caused by contamination or static electricity, do not touch the circuit board before you take any adequate action.

Operating Environment: Indoors use. This instrument has been designed for being used in an environment of pollution degree 2.

Operation Altitude: Up to 2000M. z EMC: EN61326-1(2006), IEC 61000-4-2(2008, IEC 61000-4-3(2006) + (2007).

The verifier does the following:

Detects opens, shorts, miswires and split pairs on twisted pair cabling.

Displays graph wiremap , opens, shorts, miswires, split pairs, and the remote ID number all on one screen.

Identify remote ID number only one pair.

Measures length.

Using multiple remote ID up to 8 locators.

Low battery detector “ ”.

Auto backlight. z Auto power off

Battery Replacement

Turn off the meter and disconnect all test leads before replacing the battery. Use only the correct type of batteries, properly installed in the case, to power the meter.

Options and Accessories Consumers can order options and accessories as follows: Remote ID Locator Kit, numbers 2-8.

End of life Caution: this symbol indicates that equipment and its accessories shall be subject to a separate collection and correct disposal

Reviews


There are no reviews yet.

Be the first to review “TENMARS TM-901N LAN Cable Tester”