For all your test equipment requirements

Yokogawa TY530 Digital Multimeter


The Yokogawa TY530 Digital Multimeter can directly read the various sensor output signals (mV DC/AC) at any scaling. The units displayed can be changed (16 units are available).Output signal and scaled value are simultaneously displayed.
Shutters prevent erroneous insertion of test leads into current measurement terminals (terminal shutters).Conforms to overvoltage category 1000 V AC/DC, CAT and 600 V AC/DC, CAT IV. If the function is switched to other than current measurement while a test lead remains inserted in a current measurement terminal, the fuse built into the DMM can not protect the circuits. The terminal shutters prevent such accidental errors.
Two memory modes selectable from 2 types of memory mode to suit field needs.


  • Highest Precision
  • Basic accuracy 0.09%
  • True RMS measurement
  • Ensured Field Site Safety
  • Conforms to safety standards EN61010-1,CAT III-1000V, CAT IV-600V
  • Safety shutters for preventing erroneous insertion of test leads into current measurement terminals
  • New Functions for Yokogawa Middle Class DMMs
  • Current direct reading function provided by current clamp sensor (optional)
  • Low-pass Filter (LPF)
  • Logging-mode memory for 1600 data*
  • USB communication, application software*(Optional DMM communication package)
  • Closed Case Calibration
  • 3-year Warranty


If you would like more information regarding this product, simply email us here.
  • This field is for validation purposes and should be left unchanged.
SKU: Yokogawa TY530 Category: Tags: ,

Yokogawa TY530 Specifications:

  • Additional Functions: Data hold/auto hold/range hold, maximum/minimum/average values, resistance, relative and percentage value calculation, memory function, communication function, logging-mode memory, auto power off, backlight
  • Display 3.5-digit LCD: 7-segment
  • Digital display: Main display; [6000] counts
  • Bar graph display: 31-segment
  • Polarity indicator: “-” appears automatically when the polarity is negative
  • Overrange indicator: “OL”
  • Measuring Rate 5 times/sec (Frequency: 1 time/sec, Capacitance: max. 0.14 times/sec (1000µF), Resistance: 2.5 times/sec, Temperature: 0.7 times/sec), Bar graph display: 25 times/sec (DC voltage, diode test: 5 times/sec)
  • Operating Temp. & Humidity -10 to 55°C; 80% RH or less (no condensation) 40 to 55°C; 70% RH or less
  • Storage Temp. & Humidity -30 to 70°C; 70% RH or less (no condensation)
  • Power Supply Four AA (R6) dry cells
  • Battery Life Approx. 300 hours (for continuous DC voltage measurement with alkaline cells)
  • Withstanding Voltage 6.88kV for 5 seconds (between input terminals and casing)
  • Dimensions Approx. 90(W) x 192(H) x 49(D) mm
  • Weight Approx. 570g (including batteries)
  • Compliance with Standards Safety EN61010-1, EN61010-031, 1000V CAT-III, 600V CAT-IV, pollution level 2, 2000m max. above sea level
    EMC: EN61326-1 Class B, EN55011 Class B Group 1

Basic Accuracy & Ranges

DCV 0.09% + 2, 600.0 mV to 1000 V
ACV:RMS 0.5% + 5, 600.0 mV to 1000 V
Resistance Measurement 0.4% + 1, 600.00 O to 60.000 MΩ
Continuity Check Buzzer Sounds at 50 Ω 30 O or less,, Range:600 Ω
Diode Test 1.0% + 2, 2.000 V


There are no reviews yet.

Be the first to review “Yokogawa TY530 Digital Multimeter”