The EXTECH DL160 is capable of datalogging 2 channels simultaneously — up to 256,000 readings of TRMS AC Voltage (600 volts) or Current (200 amp) or one AC Voltage and one AC Current input with a user programmable sample rate from 1 second to 24 hours.

EXTECH DL160 Additional Features:

LCD displays shows time/date, current reading, and min/max. Readings can be downloaded to your PC via the USB interface. Normal, peak, and capture (user specified trigger level) recording modes.

Extech DL160 Specifications:

The post Extech DL160 True RMS AC Voltage/Current Datalogger appeared first on Obiat Electronics.

ELECTRICAL SPECIFICATIONS: 

GENERAL SPECIFCATIONS

• Display                                6000‐count Multi‐Function LCD
• Over‐range indication       “OL” or “‐OL” is displayed
• Conversion rate  2 updates per second
• Maximum conductor size  22mm (0.87”) in diameter
• Auto Power OFF                 After 20 minutes (can be disabled)
• Operating Temperature and Humidity

0~30°C (32~86°F); 80%RH maximum

30~40°C (86~104°F); 75%RH maximum

40~50°C (104~122°F); 45%RH maximum

• Storage Temperature and Humidity =
  • -20°~60°C (‐4°~140°F); 80%RH maximum
• Temperature Coefficient  
  • 0.2 x specified accuracy / °C, < 18°C (64.5°F), > 28°C (82.4°F)
• Operating Altitude              2000m (6562ft.)
• Battery power                    (2) LR‐44 1.5V batteries (battery life 20 hours typical)
• Weight                                140g (4.9 oz.)
• Dimensions                         60 x 147 x 31.5mm (2.4 x 5.8 x 1.2”)
• Safety Standards                For indoor use and in accordance with the requirements for double insulation to:
  • EN61010‐1,
  • EN61010‐2‐030,
  • EN61010‐2‐032,
  • EN61326‐ 1;
  • EN61010‐1 Over‐voltage CAT III 600V, Pollution Degree 2
• Shock and Vibration           Sinusoidal vibration MIL‐PRF‐28800F for a Class II instrument
• Drop Protection                  1.2m (4’) drop onto hardwood or concrete flooring

Extech MA145 Battery Replacement

1. Remove the Phillips head screw at the lower back of the meter.

2. Open the battery compartment 3. Replace the two LR44 batteries observing correct polarity.

4. Re‐assemble the meter before use

5. Safety: Please dispose of batteries responsibly; never dispose of batteries in a fire, batteries may explode or leak; never mix battery types, install new batteries of the same type. Never dispose of used batteries or rechargeable batteries in household waste. As consumers, users are legally required to take used batteries to appropriate collection sites, the retail store where the batteries were purchased, or wherever batteries are sold.

Disposal: Do not dispose of this instrument in household waste. The user is obligated to take end‐of‐life devices to a designated collection point for the disposal of electrical and electronic equipment.

The post EXTECH MA145 Mini Clamp Meters + NCV appeared first on Obiat Electronics.

Desktop Indoor Air Quality CO Features:

• Display:  LCD with backlighting
• Sampling Interval:  2 seconds
• Overload Indication:  “-OL-”
• Sensor Type CO₂:  NDIR (non-dispersive infrared) technology
• Operating Conditions:  -5°C to 50 °C at < 90 % RH
• Storage Conditions:  -5°C to 50 °C at < 90 % RH
• Power Supply:  110V～230V AC, output 6.0V DC ≥ 500mA (supplied)
• Dimensions / Weight:  117 x 102 x 102mm; 204g

The post Extech CO100 Desktop Indoor Air Quality CO2 appeared first on Obiat Electronics.

The EXTECH DT300 Laser Distance Meter automatically calculates the area and volume of whatever it is measuring, and it can store the last 20 measurements to enable you to easily record your results. It comes equipped with a carrying case and batteries, and the meter utilises an auto shut off function. 

The Extech DT300 Laser Distance Finder measures Distance up to 164 ft (50m) and calculates Area and Volume. In addition, the DT300 includes a laser pointer for accurate targeting. This meter is shipped fully tested and calibrated.

EXTECH DT300 Features:
• Calculates Area and Volume automatically
• Auto power off
• Includes a carrying case and two AAA batteries
• Continuous measurement function updates the reading every 0.5 seconds.

Specifications
• Measurement Range: 0.05 to 50m
• Resolution: 0.001m
• Accuracy: ±1.5mm (up to 10m)
• Length Add Calculation: 99.99m
• Area Calculation: 999.99m²
• Volume Calculation: 999.99m³

Power requirements
• Two x AAA batteries (included)

Dimensions
• 115mm x 48mm x 28mm

The post EXTECH DT300 Laser Distance Meter appeared first on Obiat Electronics.

The Extech VB450 is a convenient compact sized Vibration Meter that measures vibration levels in industrial machinery. Misalignment, poor balancing, structural compromises, and other factors can cause unwanted vibration increases. VB450 features a wide 10Hz to 1500Hz frequency range and provides Displacement, Velocity, and Acceleration measurement.

Extech VB450 Applications:

• To ensure proper installation/maintenance for consistent productivity and operator safety of:
• Motors, bearings
• Fans, Pumps, Rotating machinery
• Plant maintenance

Extech Features

• Remote vibration sensor with magnetic adapter on 7.9″ (0.2m) coiled cable
• Wide frequency range of 10Hz to 1500Hz
• Velocity (RMS), Acceleration (Peak), and Displacement (Peak-to-Peak) measurements
• Automatic data hold after measurement button is released
• Auto power off after 1 minute
• Low battery indicator

Specifications

The post Extech VB450 Vibration Meter appeared first on Obiat Electronics.

• MA61 True RMS 60A AC Clamp Meter + NCV
• True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms
• AC Current and Relative function
• Compact 0.7″ (17mm) jaw size allows measurements in tight locations
• Variable Frequency Control (VFC): Low pass filter for accurate measurement of variable frequency drive signals
• Built-in Non-Contact Voltage (NCV) detector
• Full range overload protection
• 6000 count backlit LCD display
• Data Hold freezes reading on display
• Low battery indicator and Auto Power Off feature
• CAT II-600V and CAT III-300V safety rating

Extech MA61 Specifications:

The clamp meter is powered by two (2) AAA batteries. The battery compartment is located on the back of the meter. The battery compartment is secured by one Phillips head screw.

Battery Replacement

CAUTION: Please disconnect the test leads from the meter, turn the meter off, and unclamp the meter from any conductors before attempting to change the batteries.

1. When the low battery symbol appears on the LCD, the batteries must be replaced.

2. Turn the meter off and remove the rear battery compartment screw.

3. Lift off the battery compartment cover and replace the two 1.5V AAA cells observing correct polarity.

4. Replace the compartment cover and secure the screw before using the meter.

The post Extech MA61 True RMS 60A AC Clamp Meter + NCV appeared first on Obiat Electronics.

• MA63 True RMS 60A AC/DC Clamp Meter + NCV
• True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms
• AC/DC Current and DC Zero function
• Compact 17mm jaw size allows measurements in tight locations
• Variable Frequency Control (VFC): Low pass filter for accurate measurement of variable frequency drive signals
• Built-in Non-Contact Voltage (NCV) detector
• Full range overload protection
• 6000 count backlit LCD display
• Data Hold freezes reading on display
• Low battery indicator and Auto Power Off feature
• CAT II-600V and CAT III-300V safety rating

Extech MA63 Specifications:

Battery Replacement

CAUTION: Please disconnect the test leads from the meter, turn the meter off, and unclamp the meter from any conductors before attempting to change the batteries.

1. When the low battery symbol appears on the LCD, the batteries must be replaced.

2. Turn the meter off and remove the rear battery compartment screw.

3. Lift off the battery compartment cover and replace the two 1.5V AAA cells observing correct polarity.

4. Replace the compartment cover and secure the screw before using the meter.

The post Extech MA63 True RMS 60A AC/DC Clamp Meter + NCV appeared first on Obiat Electronics.

• MA160 TRMS 200A AC/DC Open Jaw Clamp Meter
• 0.57″ (14.5mm) open jaw size allows current measurements in tight spaces
• Built-in Non-Contact Voltage (NCV) detector with audible alert and LED indicator
• Relative Mode for Capacitance Zero and offset adjustment
• 2000 count 2-level backlit LCD display
• Convenient LED worklight for viewing in dimly lit area
• Continuity and Diode Test
• Auto Power Off with disable
• Ergomic housing with built-in test lead holders
• CAT III-600V rating

Extech MA160 Specifications:

The post Extech MA160 TRMS 200A AC/DC Open Jaw Clamp Meter appeared first on Obiat Electronics.

• EX655 True RMS 600A AC/DC Clamp Meter + NCV
• 12 Functions including AC/DC Current
• CAT III 600V Safety Rating
• Frequency and Type K Temperature
• Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals
• Inrush mode captures current surges during  motor startup
• DC ZERO mode
• LCD trending bargraph
• Complete with test leads, general purpose bead wire Temperature probe and 3 AAA batteries
• True RMS for accurate AC measurements
• 30mm jaw size accommodates conductors up to 350MCM
• LoZ prevents false readings caused by ghost voltages
• µA function for HVAC flame rod Current measurements
• Built-in Non-contact AC Voltage Detector (NCV) with LED indicator
• 6000 count backlit LCD display
• Data Hold freezes the reading on the display
• Min/Max captures highest and lowest readings
• Relative function
• Convenient LED worklight for viewing in dimly lit area
• Auto Power Off conserves battery life

The post Extech EX655 True RMS 600A AC/DC Clamp Meter + NCV appeared first on Obiat Electronics.

Extech EX650 Features:

• EX650 True RMS 600A AC Clamp Meter + NCV
• 9 Functions including AC Current
• Complete with test leads and 3 AAA batteries
• True RMS for accurate AC measurements
• 30mm jaw size accommodates conductors up to 350MCM
• LoZ prevents false readings caused by ghost voltages
• µA function for HVAC flame rod Current measurements
• Built-in Non-contact AC Voltage Detector (NCV) with LED indicator
• 6000 count backlit LCD display
• Data Hold freezes the reading on the display
• Min/Max captures highest and lowest readings
• Relative function
• Convenient LED worklight for viewing in dimly lit area
• Auto Power Off conserves battery life
• CAT III 600V Safety Rating

Extech EX650 Specifications:

The post Extech EX650 True RMS 600A AC Clamp Meter + NCV appeared first on Obiat Electronics.