The HT Italia Line Splitter separates the Active (Line) from the neutral and ground wires on a standard 240VAC outlet allowing current measurements to be made with a current clamp. Without the Line Splitter, the current clamp measures the load current going in both directions, effectively cancelling the measurement.

The HT Line Splitter has a standard measurement section and a x10 multiplier section for use with higher ranged clamp meters.

The HT Italia HA000951 Line Splitter can also be used to make voltage checks safely with standard multimeter probes.

HT Italia HA000951 Line Splitter Functions:

Conductor splitting without cable stripping!

• Measure Mains voltages safely via shrouded banana sockets
• Leakage current on earth conductor
• Measurement of leakage current under RCD mode (Line-Neutral)
• Line current
• 10X magnified Line current

The post HT Italia HA000951 Line Splitter – Separator appeared first on Obiat Electronics.

HT Italia HT9020 Clamp Meter WARRANTY CONDITIONS

This instrument is warranted against any material or manufacturing defect, in compliance with the general sales conditions. During the warranty period, defective parts may be replaced. However, the manufacturer reserves the right to repair or replace the product. The warranty shall not apply in the following cases: 

Repair and/or replacement of accessories and batteries (not covered by warranty). 

Repairs that may become necessary as a consequence of an incorrect use of the instrument or due to its use together with non-compatible appliances. 

Repairs that may become necessary as a consequence of improper packaging. 

Repairs which may become necessary as a consequence of interventions performed by unauthorized personnel.  Modifications to the instrument performed without the manufacturer’s explicit authorization. 

Use not provided for in the instrument’s specifications or in the instruction manual

The post HT Italia HT9020 Clamp Meter with Powers/Harmonics and Inrush Currents appeared first on Obiat Electronics.

This instrument is guaranteed for one year against material or production defects, in accordance with our general sales conditions. During the warranty period the manufacturer reserves the right to decide either to repair or replace the product. The warranty shall not apply in the following cases: 

Repair and/or replacement of accessories and battery (not covered by warranty). 

Repairs that may become necessary as a consequence of an incorrect use of the instrument or due to its use together with non-compatible appliances. 

Repairs that may become necessary as a consequence of improper packaging. 

Repairs which may become necessary as a consequence of interventions performed by unauthorized personnel.  Modifications to the instrument performed without the manufacturer’s explicit authorization 

Use not provided for in the instrument’s specifications or in the instruction manual

Preparation for Use

Initial checks This instrument was checked both mechanically and electrically prior to shipment. All possible cares and precautions were taken to let you receive the instrument under perfect conditions. Notwithstanding we suggest you to check it rapidly (any damage may have occurred during transport – if so please contact the local distributor from whom you bought the item). Make sure that all standard accessories mentioned in § 12.2 are included. Should you have to return back the instrument for any reason please follow the instructions mentioned in § 13

HT Italia HT7003 Service

Should the instrument not work properly, make sure that battery is correctly installed and working and replace if necessary before contacting your distributor. Should you need for any reason to return back the instrument for repair or replacement take prior agreements with the local distributor from whom you bought it. Do not forget to enclose a report describing the reasons for returning (detected fault). Use only original packaging. Any damage occurred in transit due to not original packaging will be charged anyhow to the customer. The manufacturer will not be responsible for any damage to persons or things

The post HT Italia HT7003 Clamp Meter 300A AC appeared first on Obiat Electronics.

HT Italia HT4013 Function:

• AC/DC current up to 400A
• DC/AC voltage up to 600V
• “Voltsense” feature for AC voltage detection
• Resistance
• Continuity test with buzzer
• Frequency with test leads
• Capacitance
• Diode test
• Duty Cycle
• Temperature with type K probe
• Autorange
• Data HOLD
• Relative measurement
• Auto Power OFF

HT Italia HT4013 Standard Accessories:

• Couple of test leads
• TK101 : Type K bead probe
• Carrying bag
• Batteries
• User manual

PRECAUTIONS AND SAFETY MEASURES

The instrument has been designed in compliance with directive IEC/EN61010-1 relevant to electronic measuring instruments. For your safety and in order to prevent damaging the instrument, please carefully follow the procedures described in this manual and read all notes preceded by the symbol with the utmost attention. Before and after carrying out the measurements, carefully observe the following instructions:  Do not carry out any voltage or current measurement in humid environments.  Do not carry out any measurements in case gas, explosive materials or flammables are present, or in dusty environments.  Avoid any contact with the circuit being measured if no measurements are being carried out.  Avoid any contact with exposed metal parts, with unused measuring probes, circuits, etc.  Do not carry out any measurement in case you find anomalies in the instrument such as deformation, breaks, substance leaks, absence of display on the screen, etc.  Pay special attention when measuring voltages higher than 20V, since a risk of electrical shock exists.

The post HT Italia HT4013 AC/DC 400 Amp Clampmeter appeared first on Obiat Electronics.

HT Italia HT100 is a professional CAT IV clamp meter with an inbuilt automatic detection function for AC True RMS current measurements of up to 200A. The model have an “open jaw” design, a large LCD display (9999 counts), a “Voltsense” voltage detection feature and a backlight to make it possible to see regardless of dim or bright lighting. The model also performs AC/DC True RSM voltage, resistance, continuity and diode test measurements. The Auto Power OFF feature extends the battery life.

HT ITALIA HT100 Functions:

• TRMS measurement
• AC current up to 200A
• DC/AC voltage up to 1000V
• “Voltsense” feature for AC voltage detection
• Resistance
• Continuity test with buzzer
• Diode test
• Autorange
• Automatic detection of functions
• CAT IV 600V, CAT III 1000V Safety Rating
• Data HOLD
• Backlight
• Auto Power OFF

HT ITALIA HT100 Standard Accessories:

• Two of test leads
• Carrying bag
• Batteries
• User manual

The post HT Italia HT100 AC TRMS 200A Clampmeter appeared first on Obiat Electronics.

HT Italia XL421 Functions:

• True-rms AC current measurement up to 2500A.
• Recording with sampling programmable period.
• Manual activation of recording.
• Low battery indication.
• LED indication of any operation.
• RS-232 interface.
• Data maintained without batteries.
• Programming with DATALINK software.

Included Accessories

• Inbuilt/integrated 3000 amp flexible current clamp, type HTFLEX33DL.
• RS-232 serial cable, type C2004.
• Adhesive Velcro for fixing.
• Carrying bag, type BORSA2000.
• User’s manual.

The post HT Italia XL421 True-Rms AC Single-Phase Current Logger appeared first on Obiat Electronics.

Specifications

The post HT Italia HT9021 1000A AC/DC True-Rms CAT IV 600V Clampmeter with Temperature Measurement appeared first on Obiat Electronics.

Specifications

The post HT Italia HT9019 Clampmeter AC 1000A TRMS CAT IV 600V appeared first on Obiat Electronics.

The HT Italia HT9015 performs resistance, continuity test, frequency, capacitance, diode test, duty cycle and temperature with type K probe measurements.

The clamp has a large LCD 4 digit display (6000counts), plus a backlight and a bar-graph display for easy reading in critical environments.

The model perform also resistance, continuity test, frequency, capacitance, diode test, duty cycle and temperature with type K probe measurements.

The AutopowerOFF feature is also available for the meter in order to preserve it’s internal battery charge.

The post HT Italia HT9015 AC/DC TRMS 600A CAT IV Clampmeter with Temperature Measurement appeared first on Obiat Electronics.

The HT Italia HT9014 has a large LCD 4 digit display (6000counts), with back light and bargraph for ease of reading in critical environments. The HT Italia HT9014 also performs resistance, continuity test, frequency, capacitance, diode test, duty cycle and temperature with type K probe measurements. The Auto PowerOFF feature is also available for the meter in order to preserve it’s internal battery charge.

Take extreme care for the following conditions while measuring with the HT Italia HT9014: • Do not measure voltage or current in humid or wet environment. • Do not use the meter in presence of explosive gas (material), combustible gas (material), steam or dust. • Insulate yourself from the object to be tested. • Do not touch exposed metal (conductive) parts such as test lead ends, sockets, fixing objects, circuits, etc. • If you detect anomalies of testing end (metal part) and attachment of the meter such as breakages, deformations, foreign substances, no display, etc., do not take any measurement. • Measuring voltage over 20V as it might cause human body electricity conduction.

The post HT Italia HT9014 Clampmeter AC 600A TRMS, CAT IV 600V appeared first on Obiat Electronics.