HT ITALIA NEPTUNE Key Features:

• it can quickly measure insulation up to 1000V, just like top-of-the-range testers.
• 50,100,250,500,1000VDC Insulation test voltages.
• it measures continuity of protective conductors with 200mA to solve the most common problems related to masses.
• measure Inrush currents, Harmonics and THD%, just like top-of-the-range power quality analyzers.
• with a wide range of external clamp transducers it can measure AC TRMS, DC, AC+DC current and Inrush current, starting from 1mA up to 3000A.
• compare each measurement with the limits prescribed by the Guidelines and I provide a clear result OK or NOT OK
• it’s a multimeter with functions only available if using top-of-the-range instruments.
• CAT IV 600V, CAT III 1000V Safety Rating
• Similar to the Fluke 1587 & Fluke 1577
• ISO 9000 CALIBRATION CERTIFICATE INCLUDED

HT ITALIA NEPTUNE  Included Accessories:

• 4324-2 Pair of Red/Black banana connectors with 2/4mm tip
• YAAMK0001HT0 Pair of Red/Black alligator clips
• YABAT0001HT0 Alkaline battery type AAA IEC LR03 1.5V, 4 pieces
• YABRS0002HT0 Carrying bag
• YAMUM0068HT0 User manual on CD-ROM
• YAMUM0067HT0 Quick user guide
• Calibration certificate ISO9000

Optional Accessories:

• F3000U Flexible clamp with full scale 30/300/3000A AC and banana connectors
• HT96U* Standard clamp with full scale 1/100/1000A AC and Hypertac connector
• HT97U* Standard clamp with full scale 10/100/1000A AC and Hypertac connector
• HT98U* Standard clamp with full scale 1000A DC and Hypertac connector
• HT4006 Standard clamp with full scale 40/400A AC/DC and banana connectors
• NOCANBA Adapter for clamp connection with Hypertac connector
• 5004-IECR Red alligator clip
• 5004-IECN Black alligator clip
• C2065 3-wire cable Red, Black and Green with Schuko plug

The post HT ITALIA NEPTUNE Multimeter/Insulation Tester appeared first on Obiat Electronics.

MEASURES:

›    Earth Resistance with 2- or 3-pole volt-ampere method in TT, TN and IT systems, non-trip earth loop impedance measurement, stackless earth ground resistance measurement  with T2100 (optional).

›    Soil Resistivity with 4 pole Wenner method.

›    RCD Testing type A, AC, B with test current up to 10A.**

›    Insulation Resistance measurement with test voltage up to 1000V.

›    Continuity measurement of protective conductors with test current up to 200mA.

›    Advanced Loop Testing of MCBs, fuses and cable sizing.

›    Measurement of phase sequence (SEQ).

›    Measurement and recording of environment parameters and leakage currents through external probes.

HT INSTRUMENTS GSC60 for the Analysis of Power Quality and Energy Consumption.

›    9 types of electrical systems: 1Φ-2wires, 1Φ-split phase, 3Φ-3 wires, 3Φ-Aron, 3Φ-Open Δ, 3Φ-Open Y, 3Φ-2 el. 1/2, 3Φ-4 wires Y, 3Φ-High Leg.

›    632 parameters can be recorded for over two months.

›    Real Time. Real-time display of all waveforms, harmonics, vector diagrams as well as summary function on phases for a quick reading of the most important parameters.

›    Voltage Anomalies. Detection of voltage anomalies with a resolution of 20ms.

›    Energy Saving. One click allows you to check all the electrical absorption of all the equipment connected to the main power supply and save on energy costs.

Live. Real Time Analysis.

Wi-Fi connection allows you to display wave forms, vector diagrams, harmonics and all electrical parameters for each phase on your tablet/smartphone/PC

GSC60 helps to dispel the myth that recording analysis is complex. App HTanalysis makes it simple and clear. Using ZOOM Functions you can display all the recorded quantities. JUMP Function displays harmonics in any recording step just by clicking on the quantity.

HT INSTRUMENTS GSC60 Functions:

The post HT INSTRUMENTS GSC60 Professional Electrical Power Analyzer appeared first on Obiat Electronics.

Three different function modes are available on the meter: FIX mode (fixed test voltage), ADJUST mode (programmable test voltage), and RAMP mode (programmable test voltage and duration time with up to three selectable ramps) which allows for correct results in each situation.

The Polarization Index (P.I.) and Dielectric Absorption Ratio (D.A.R.) available features are duration tests which permits to define a good behaviour of the global insulation.

The HT Italia HT7051 is powered by a NiMH rechargeable battery, also having an internal memory for saving results, and an RS-232 interface for connection to a PC to transfer the saved measurements. The instrument is housed in a portable, hard carrying case which assures safety when used as an “on field” meter.

HT Italia HT7051 Functions:

• Insulation resistance measurement with test voltage up to 5kV DC.
• Measurement range up to 10T ohm.
• FIX Mode: with test voltages of 100V, 250V, 500V, 1000V, 2500V, and 5000V DC.
• ADJUST Mode: with test voltage selectable from 100V
  to 5KV DC.
• RAMP Mode: with selectable duration time and test voltage.
• Selection of three types of ramp test.
• Polarization Index measurement (P.I.).
• Dielectric Index measurement (D.A.R.).
• True-Rms voltage measurement up to 600V AC.
• DC measurement to 600V.
• SMOOTH feature for stable measurement results.
• GUARD test lead for surface leakage current compensation.
• Min/Max limit selectable threshold on measurements.
• Automatic discharge of device under test.
• Internal memory for saving results.

Included Accessories

• KIT 14000: Set of Three safety cables with alligator clips + Two safety cables with test leads.
• C7001: Power cord.
• BORSA2000N: carrying case for accessories.
• TOPVIEW: PC software + RS-232 cable.
• Calibration certificate ISO9000.
• User manual.

The post HT Italia HT7051 Programmable Digital 5KV Insulation Tester appeared first on Obiat Electronics.

Thanks to its LOCK feature insulation measurement can be performed under continuous mode on a device under test. A timer programmable from 2s to 60s enables you to carry out endurance tests as well. Other features are DC/AC voltage measurement up to 600V, resistance and continuity test with buzzer as a standard DMM. A very large and backlight custom display permits easy readings in dark environments. Small size, ergonomic shape and light weight (just 450g!) make it an essential tool for any electrical installer.

A hand-held meter to test insulation, voltage measurements and continuity of earth conductors.

HT Italia M70 is an innovative hand-held insulation resistance tester that is designed to perform insulation resistance measurements with test voltage up to 1000VDC and continuity test measurements of earth conductors with 200mA test current, in compliance with IEC/EN61557-1 requirements, on domestic and industrial electrical installations.

The HT Italia M70 can also be used to test electrical equipment and switchboards according to IEC/EN60204-1 and IEC/EN60439-1 standards.

Thanks to its LOCK feature insulation measurements can be performed on a device under test using the continuous mode.
A timer is programmable from 2s to 60s enabling you to carry out endurance tests.

Other features are DC/AC voltage measurement up to 600V, resistance and continuity tests, with buzzer, as a digital multimeter.

A very large back-lit custom display permits easy readings in dark environments and its small size, ergonomic shape and light weight (just 450g!) make it an essential tool for any electrical installer.

HT Italia M70 Functions:

• Insulation with test voltages of 250V, 500V, and 1000V DC.
• Up to 4G ohm measurement range.
• Automatic discharge of device under test.
• LOCK feature for continuous measurements.
• Programmable timer up to 60 seconds.
• Continuity of earth conductors with test current of 200mA.
• Automatic test lead calibration.
• AC/DC voltage measurement up to 600 Volts.
• Resistance and continuity test with buzzer.
• LCD with Bargraph and backlight.
• AutoPower OFF.
• Low battery indication.
• Protective rubber holster.

Included Accessories:

• Set of Two cables + Two alligator clips + Test lead.
• Batteries 4 x 1.5V alkaline.
• Carrying bag.
• CE declaration of conformity.
• User’s manual.

HT Italia M70 Specifications:

The post HT Italia M70 1000V Insulation Meter, 200mA Continuity Meter and RMS DMM appeared first on Obiat Electronics.

• Continuity of protection conductors with 200mA.
• Insulation resistance with 50V, 100V, 250V, 500V, 1000V DC.
• Type A, AC, and B general, selective, and delayed RCDs up to 1000mA.
• Test on earth leakage relay RCDs (with RCDX10 optional accessory).
• Line/Fault impedance with prospective short circuit current calculation.
• High resolution line/fault impedance (with IMP57 optional accessory).
• Curve B, C, D, and K, (MCBs and gG and aM fuses)
• Selection of length, type, and insulation of the cable under test.
• Selection of tripping time of the protection device under test.
• Earth resistance and soil resistivity with auxiliary rods.
• Earth ground resistance (with T2100 optional accessory).
• Non-trip earth loop impedance.
• Phase sequence indication.
• Voltage drop on main power lines measurement.
• Power Analysis, Harmonic Analysis up to 25th.
• Leakage current by means of the external transducer (HT96U optional accessory).
• Environmental parameters (C/F, HR%, Lux) by means of optional probes.
• TFT display with touch screen.
• Help on-line.
• Internal memory, USB interface to connect to a PC.
• Built-in WiFi interface to connect to iOS and Android devices.
• Rechargeable NiMH batteries (external battery charger).

Included Accessories

• C2033X Cable 3-wires with Shuko plug
• KITGSC5 Set 4 cables + 4 alligator clips
  + 2 test leads
• KITTERRNE Set 4 cables + 4 metal probes
• PR400 Remote lead per activation test
• PT400 Touch pen
• TOPVIEW2006 Windows software
  + optical/USB cable
• BORSA2051 Soft carrying bag
• YABAT0003000 NiHM rechargeable battery,
  type ‘AA’ 1.2V,6 pcs
• YABAT0004000 External battery charger
• ISO9000 calibration certificate
• Quick reference guide
• User manual on CD-ROM

The post HT Italia MACROTEST-G3 Multifunction Continuity/Earth Safety Tester appeared first on Obiat Electronics.

• Insulation resistance test voltage up from 500 Volts to
  10000 Volts in 25 Volt DC steps.
• Measurement range up to 10T ohm.
• Programmable timer from 1 second to 30 minutes.
• Diagnostic test on materials (PI, DAR, DD).
• Insulation resistance with ‘RAMP” test.
• Withstanding voltage up to 10KV DC.
• AC/DC voltage up to 600V.
• Capacitance measurement of device under test.
• Automatic discharge of device under test.
• GUARD terminal for compensation of surface currents.
• LCD with backlight.
• Internal memory for saving results.
• Recall saved results at display.
• RS-232 and USB interfaces for PC connection.
• Rechargeable internal battery.

HT Italia HT7052 Included Accessories:

• Qty 1. Test lead (red) with tip, protection 10KV, (2 meters long).
• Qty 2. Test lead (red/black), protection 10KV, (2 meters long).
• Qty 2. Alligator clip (red/black), Protection 10KV.
• Qty 1. Guard test lead (green).
• Qty 1. Guard alligator clip (green).
• Qty 1. Mains power cord.
• Qty 1. USB cable.
• Qty 1. RS-232 cable.
• Qty 1. “TeraView” software on CD-ROM.
• Qty 6. Rechargeable NiMH batteries (1.2V) type IEC LR20.
• Qty 1. Calibration certificate ISO9000.
• Qty 1. User manual.

The post HT Italia HT7052 Programmable digital insulation tester 10 KV appeared first on Obiat Electronics.