Phase Sequence Indicator Archives - Obiat Electronics https://obiat.com.au/product-category/ht-italia/phase-sequence-indicator/ keeping your industry up and running Sun, 26 Sep 2021 01:42:59 +0000 en-AU hourly 1 https://wordpress.org/?v=6.9 https://obiat.com.au/wp-content/uploads/2016/05/obiat_logo_2-100x100.jpg Phase Sequence Indicator Archives - Obiat Electronics https://obiat.com.au/product-category/ht-italia/phase-sequence-indicator/ 32 32 HT Italia HT9 Two-pole CAT IV Voltage Tester with Lamp Test https://obiat.com.au/product/ht-italia-ht9-pen-type-digital-multimeter-lamp-test/ https://obiat.com.au/product/ht-italia-ht9-pen-type-digital-multimeter-lamp-test/#respond Mon, 09 May 2016 10:02:30 +0000 http://rapid-tech.com.au/?post_type=product&p=3342 HT Italia Logo

HT Italia HT9 Two pole voltage tester with Lamp test

In addition to DC/AC voltage measurement and continuity testing the HT Italia HT9 also offers gas-filled lamp tests and phase sequence/conformity detection features.

HT Italia HT9 Features:

  • DC/AC voltage up to 690V
  • AC voltage detector with 1 wire method
  • Neon and fluorescent lamp test
  • Sodium/mercury vapor lamp test
  • Halogen lamp test
  • Non-electronic ballast test
  • Continuity test
  • Phase sequence test
  • Diode test
  • LED and acoustic indications
  • Built-in torch
  • LCD display
  • Safety: IEC/EN61010-1, IEC/EN61010-2-030, IEC/EN61243-3:2010
  • Measurement category: CAT III 690V, CAT IV 600V
Authorised Australian Distributor
WARRANTY 3

PDF Logo   HT9-8-6 Brochure

PDF Logo    HT9-8-6 User Manual

The post HT Italia HT9 Two-pole CAT IV Voltage Tester with Lamp Test appeared first on Obiat Electronics.

]]> To overcome difficult pinpointing of the right cable within a frame on a switchboard under poor light conditions, a built-in white LED flashlight makes testing possible and easy even in dark environments. The slim and ergonomic design of HT Italia HT9 is highly appreciated by contracting electricians, field professionals, troubleshooters as well as any kind of user.

Designed according to the requirements of field professionals, HT Italia HT9 is must-have troubleshooting tool.

Two pole voltage meter with Lamp Test. With built-in gas-filled lamp tester and non-contact phase sequence/conformity tester

HT9_small3

Digital two pole voltage tester HT Italia HT9 provides daily use features. In addition to DC/AC voltage measurement and continuity test, HT9 also offers gas-filled lamp test and phase sequence/conformity detection features. To overcome difficult pinpointing of the right cable within a frame on a switchboard under poor light conditions, a built-in white LED flashlight makes testing possible and easy even in dark environments. The slim and ergonomic design of HT9 is highly appreciated by contracting electricians, field professionals, troubleshooters as well as any vkind of user. Designed according to the requirements of field professionals, HT9 is must-have troubleshooting tool.

Figure 2 – HT Italia HT9 LED and Display Description
1. Voltage indication leds  HT9 LED Display
2. Buzzer hole for acoustic signal
3. Indication led Lamp test
4. Indication led Phase sequence
5. Indication led Phase detection / Dangerous voltage
6. Indication led Continuity test
7. Indication led 12V and positive or negative polarity
8. LCD display with voltage, polarity and flat battery indic
The HT Italia HT9 can also be used to check reactors, starters,
capacitors and resistors, further to the following kinds of lamps:

  • Fluorescent lamps
  • Low-pressure sodium lamps
  • High-pressure sodium lamps
  • Neon tubes
  • Mercury-vapour lamps and halogen lamps
 Standards

  • EMC 2004/108/CE Directive
  • CE MARK
  • IEC/EN 61010-1
  • IEC/EN61010-2-030
  • IEC/EN61243-3:2010
  • LVD 2006/95/CE Directive

HT Italia HT9 Specifications:

TECHNICAL SPECIFICATIONS
Accuracy indicated as: ±[%rdg + (num. dgt * resolution)] at 23°C ± 5°C, <70%HR
AC/DC VOLTAGE MEASUREMENT
Range [V] 12.0 – 299.9
300 – 690
Resolution [V] 0.1
1
Frequency range [Hz] 16 – 400
Accuracy +/-(3%rdg + 5dgt)
Overload protection 690VDC/AC
AC VOLTAGE WITH 1 WIRE
Range [V] 100 – 690
Frequency range [Hz] 50 – 60
Measurement method 1-wire with contact on metal live parts
Overload protection 690VAC
PHASE SEQUENCE INDICATION
Voltage range [V] 120 – 400 (Phase – Earth)
Frequency range [Hz] 50 – 60
Measurement method 2-wires with contact on metal live parts
LAMP TEST
Voltage with new battery Approx 3kV / 240kHz
Field intensity (200-280kHz) Approx 100µV/m
Indications LED blinking
CONTINUITY TEST
Range 0 – 500KΩ + 50%
Test current <7µA
Indications LED + acoustic signal
GENERAL SPECIFICATIONS
Mechanical specifications
Dimensions (L x W x H) 255 x 60 x 35mm
Weight (included batteries) 170g
Encapsulation IP64
Display LED, LCD
Power supply
Internal supply 2×1.5V alkaline batteries type AAA, IEC LR03
Reference guidelines
Safety IEC/EN61010-1, IEC/EN61010-2-030, IEC/EN61243-3:2010
Insulation double insulation
Pollution degree 2
Measurement category CAT III 690V; CAT IV 600V
Max height of use 2000m
Environmental conditions
Reference temperature 23°C ± 5°C
Working temperature -15 to 55°C
Working humidity <85%HR
Storage temperature -20 to 70°C
Storage humidity <85%HR

 

The post HT Italia HT9 Two-pole CAT IV Voltage Tester with Lamp Test appeared first on Obiat Electronics.

]]> https://obiat.com.au/product/ht-italia-ht9-pen-type-digital-multimeter-lamp-test/feed/ 0 HT ITALIA HT82 Portable Digital Phase Sequence Indicator https://obiat.com.au/product/ht-italia-ht82/ https://obiat.com.au/product/ht-italia-ht82/#respond Thu, 17 Mar 2016 03:56:53 +0000 http://sitebuilds.net/rapidtech/?post_type=product&p=1751 HT_Italia_Ca

Portable digital phase sequence indicator. HT Italia HT82 model is a digital portable meter to perform the phase sequence indication measurement by connecting the standard test leads on L1, L2 and L3 phases of a generic three phase system. The meter shows the “R” indication in positive test and “L” indication in the opposite case. An acknowledgement of wrong cable connection it’s also detectable by meter.

Warranty 4

The post HT ITALIA HT82 Portable Digital Phase Sequence Indicator appeared first on Obiat Electronics.

]]>

HT ITALIA HT82 Functions:

  • AC voltage functional range from 40V to 690V
  • Frequency functional range from 15Hz to 400Hz
  • ‘R’ and ‘L’ indication at display
  • Detectable of wrong connection
  • LCD custom display
  • Protection holster
  • Safety: IEC/EN61010-1, CAT III 600V

Accessories

Standard
  • 3 test cables + 3 alligator clips

kit82.jpg__377x213_q85_crop_subsampling-2_upscale

  • Carrying case
  • User manual

Specifications

PHASE SEQUENCE INDICATION
AC Voltage functional range 40V – 600V
Frequency functional range 15Hz – 400Hz
Mechanical specification
Dimensions 130(L) x 69(W) x 22(H)mm
Weight (included battery) 130g
Power supply
External power supply directly from electrical network
Measurement method 3-wires
Display
Features Custom, LCD, with “R” or “L” phase sequence indication
Standards and safety
Safety IEC/EN61010-1
Insulation double insulation
Pollution degree 2
Overvoltage category CAT III 600V
Max altitude 2000m
Environmental conditions
Reference temperature 23° ± 5°C
Working temperature 5 – 40 °C
Working humidity <80%HR
Storage temperature -10 – 60 °C
Storage humidity <70%HR
Max altitude 2000m

The post HT ITALIA HT82 Portable Digital Phase Sequence Indicator appeared first on Obiat Electronics.

]]> https://obiat.com.au/product/ht-italia-ht82/feed/ 0