Process Calibrators Archives - Obiat Electronics https://obiat.com.au/product-category/ht-italia/process-calibrators/ keeping your industry up and running Sat, 10 Jan 2026 14:32:25 +0000 en-AU hourly 1 https://wordpress.org/?v=6.9 https://obiat.com.au/wp-content/uploads/2016/05/obiat_logo_2-100x100.jpg Process Calibrators Archives - Obiat Electronics https://obiat.com.au/product-category/ht-italia/process-calibrators/ 32 32 HT Italia HT8100 Process Calibrator/Multimeter https://obiat.com.au/product/ht-italia-ht8100-process-calibratormultimeter/ https://obiat.com.au/product/ht-italia-ht8100-process-calibratormultimeter/#respond Fri, 18 Mar 2016 00:29:38 +0000 http://sitebuilds.net/rapidtech/?post_type=product&p=1843 HT_Italia_Ca

The HT8100 is a meter performing measurements as TRMS DMM as well as a process calibrator generating 0-20mA and 4-20mA DC current signals. As DMM the instrument carries out AC/DC/AC+DC voltage measurements up to 1000V and AC/DC/AC+DC current measurements up to 1A.

Under the current generation mode you can manually select between 0 to 20mA and 4-20mA as well as automatic ramps on output signal. It is capable of measuring current absorbed by external transducers simulating a current adjustable within the whole measuring range.

The instrument can store measurement results into an internal memory and is designed in compliance with safety standards IEC/EN61010-1 according to CAT III 1000V and CAT IV 600V with double insulation protection.

WARRANTY 3

HT 8000 Data SheetHT8100 Data Sheet

The post HT Italia HT8100 Process Calibrator/Multimeter appeared first on Obiat Electronics.

]]> The HT Italia HT8100 is a professional meter performing measurements as TRMS DMM as well as process calibrator generating 0-20mA and 4-20mA DC current signals. As a DMM, the instrument carries out AC/DC/AC+DC voltage measurements up to 1000V and AC/DC/AC+DC current measurements up to 1A. Under the current generation mode you can manually select between 0-20mA and 4-20mA as well as automatic ramps on output signal. It is capable of measuring the current absorbed by external transducers simulating a current adjustable within the whole measuring range. The instrument can store measurement results into an internal memory and is designed in compliance with safety standards IEC/EN61010-1 according to CAT III 1000V and CAT IV 600V with double insulation protection. Each function can be selected through corresponding keys. This instrument is typically used in the automation field.

HT Italia HT8100 Functions:

  • DC/AC TRMS Voltage.
  • DC/AC TRMS Current.
  • AC+DC Measurements.
  • Generation of output current signal up to 24mA DC.
  • Selection 0-20mA and 4-20mA output.
  • Up to 4 available automatic ramp.
  • Loop current measurement of external transducers.
  • 250 Ohm HART feature.
  • Simulating of external transducers.
  • Resistance and continuity test.
  • Diode Test.
  • Frequency, Data Hold, Min/Max/AVG.
  • Manual/Autorange.
  • Relative measurements.
  • Internal memory.
  • Autotest for automatic detection of AC or DC parameters.
  • Auto backlight.
  • Auto Power Off.

Included Accessories

  • Protective rubber holster.
  • Test leads (red and black).

Yaamk0000ht0

  • Belt with Magnetic end.

Magnetic Hanger

  • Alligator clips

Yaamk0001ht0

  • Batteries.
  • User manual.

Specifications

Specifications
DC Voltage range 50.000mV – 1000.0V
AC TRMS Voltage range 50.000mV – 1000.0V
DC Current range 50.000mA – 1.0000A
AC TRMS Current range 50.000mA – 1.0000A
Resistance range 500.00Ω – 50.000MΩ
Continuity test range 500.0Ω
Diode Test range 2.000V
Frequency AC Voltage/Current range 500.00Hz – 100.00kHz
Power supply 4 x 1.5V alkaline batteries type AA IEC LR6
Sizes 207(L)x95(W)x52(H) mm
Weight (included batteries) 630g

The post HT Italia HT8100 Process Calibrator/Multimeter appeared first on Obiat Electronics.

]]> https://obiat.com.au/product/ht-italia-ht8100-process-calibratormultimeter/feed/ 0 HT ITALIA HT8051 Multifunction Process Calibrator 4-20mA / 0-10V https://obiat.com.au/product/ht-italia-ht8051-multifunction-process-calibrator-4-20ma-0-10v/ https://obiat.com.au/product/ht-italia-ht8051-multifunction-process-calibrator-4-20ma-0-10v/#respond Thu, 17 Mar 2016 23:58:56 +0000 http://sitebuilds.net/rapidtech/?post_type=product&p=1833  

HT8051 is a digital process calibrator capable of generating and measuring signals of DC voltage and current up to 10V and 24mA respectively with a very simple setting of values thanks to the innovative adjuster. In measuring and generating current, it is also possible to define a display, also in percentage format, corresponding to the set values (0% = 4mA, 100% = 20mA).

The generation of voltage and current signals is also possible by using up to 3 selectable ramps. This model also allows measuring the current absorbed byexternal transducers directly supplied by it and simulating the presence of a transducer with adjustable current in its whole measuring range. HT8051 has been designed in compliance with safety standard IEC/EN61010-1 with double protective insulation, and each function can be selected through the appropriate buttons found on the front panel. This device is the ideal solution for typical industrial automation applications and for laboratory activities.

FUNCTIONS

  • TRMS
  • DC 4-20mA current measurement
  • DC 0-10V voltage measurement
  • DC 4-20mA current generation
  • DC 0-10V voltage generation
  • Measurement of output current of transducers
  • Simulation of an external transducer
  • Loop supply with minimum voltage 24V
  • Generation of selectable ramp
  • AC/DC voltage MAX 10VDC
  • AC/DC current MAX 24mADC

WARRANTY 3

HT 8000 Data Sheet HT 8051datasheet

The post HT ITALIA HT8051 Multifunction Process Calibrator 4-20mA / 0-10V appeared first on Obiat Electronics.

]]> HT ITALIA  HT8051 Specifications
Specifications
Measured DC voltage range 0.01 – 100.00mV
0.001 – 10.000V
Generated DC voltage range 0.01 – 100.00mV
0.001 – 10.000V
Measured DC current range 0.001 – 24.000mA
Generated DC Current (SOUR and SIMU features) range 0.001 – 24.000mA
25.00 -125.00%
Loop Mode 25VDC±10%
Display
Characteristics 5 LCD, double display, sign and decimal point
Overload indication “-OL-” at display
Power supply
Rechargeable battery 1×7.4/8.4V 600mAh Li-ION
Battery life approx 8 hours (@ SOUR mode 12mA, 500Ω)
approx 15 hours (@ MEAS mode)
Alkaline battery 1x9V type NEDA1604, 006P, IEC6F22
Mechanical characteristics
Dimensions (L x W x H) 195 x 92 x 55mm
Weight (included battery) 400g
Environmental conditions of use
Reference temperature 18°C – 28°C
Working temperature/humidity -10 – 40°C / <75%RH
Storage temperature/humidity -20 – 60°C / <75%RH
Standard guidelines
Safety IEC/EN61010-1, CAT I 30V
Insulation double insulation
Pollution degree 2
Max height of use 2000m

 

The post HT ITALIA HT8051 Multifunction Process Calibrator 4-20mA / 0-10V appeared first on Obiat Electronics.

]]> https://obiat.com.au/product/ht-italia-ht8051-multifunction-process-calibrator-4-20ma-0-10v/feed/ 0 HT ITALIA HT8000 Portable Digital Process Calibrator https://obiat.com.au/product/ht-italia-ht8000-portable-digital-process-calibrator/ https://obiat.com.au/product/ht-italia-ht8000-portable-digital-process-calibrator/#respond Thu, 17 Mar 2016 23:21:36 +0000 http://sitebuilds.net/rapidtech/?post_type=product&p=1809 HT_Italia_Ca

The HT8000 is a portable digital process calibrator designed to generate and measure DC voltage and DC current up to 10V and 24mA respectively. On DC current generation it is also possible to display percentage values corresponding to current settings (0% = 4mA, 100% = 20mA). The instrument can also measure current absorbed by external transducers and simulate a transducer within the whole measurement range.

Function

Generation of output voltage signal with amplitude up to 10VDC
Voltage measurement up to 10VDC
Generation of output current signal with amplitude up to 24mADC
Current measurement up to 24mAVDC
Current measurement under percentage format (4-20mA)
Loop current measurement of external transducers
Simulating of an external transducer
Fuse protection on inputs

Included Accessories

Test leads with tip 2mm
Battery
Case
User manual

WARRANTY 3

HT 8000 Data Sheet HT-8000 Data Sheet

The post HT ITALIA HT8000 Portable Digital Process Calibrator appeared first on Obiat Electronics.

]]> HT ITALIA HT8000 Specifications

 

Specifications
DC Voltage (Measured and Generated) Range 0.01 – 100.00mV
0.001 – 10.000V
DC Current (Measured and Generated) Range 0.001 – 24.000mA
25.00 – 125.00%
Loop Mode Range 24V DC
GENERAL SPECIFICATIONS
Display
Characteristics 5 LCD, sign and decimal point
Overload indication “O.L” at display
Negative value indication “-O.L” at display for the herewith values
<-2mV [100mV], <-0.2V [10V], <-1mA [24mA]
Fuses
Type of fuse FF 125mA/250V, 5x20mm, 0.03kA
Power supply
Battery 1x9V alkaline NEDA1604, 006P, IEC6F22
Low battery indication “battery” symbol at display
Battery life approx 4 hours (type 1604), 2 hours (type 006P)
Mechanical characteristics
Dimensions (L x W x H) 190 x 89 x 42mm
Weight (included battery) 350g
Environmental conditions of use
Reference temperature 18°C – 28°C
Working temperature -10 – 50°C
Working humidity <75%HR
Storage temperature -40 – 60°C
Storage humidity <75%%HR
Standard guidelines
Safety IEC/EN61010-1
Insulation double insulation
Pollution degree 2
Max height of use 3000m

 

The post HT ITALIA HT8000 Portable Digital Process Calibrator appeared first on Obiat Electronics.

]]> https://obiat.com.au/product/ht-italia-ht8000-portable-digital-process-calibrator/feed/ 0