Bluetooth communication

Kyoritsu 6516BT has a Bluetooth communication function and can exchange data with Android/ iOS tablet devices.

Before starting to use this function, download the special application “KEW Smart *” via the internet.

Large LCD & HELP function

• All the test data is shown in one large colored screen.
• HELP function will show how to connect the instrument according to the function selected

Operation in 3 simple steps & Hands free testing

1. Set the rotary dial to your testing range.
2. Connect the instrument to the installation under test.
3. Press the test button.(By remote probe or using the Lockdown function of the test button.)

Anti-Trip Technology (with 2 & 3 wire)

For no trip LOOP L-PE testing on all RCDs.
With 3 wire (L, N, PE), to get the best accuracy readings.
With 2 wire only, very useful in case of no Neutral (i.e. 3-phase motor lines).

Loop Impedance 0.001 resolution

High test current range of 2Ω with 0.001Ω resolution.

Zs/Ra Limit

Zs Limit compares the values required by Electrical Installations Standard with measured results.

The verification of safety requirement on an electrical installation is simplified by using Zs/Ra Limit function. This function will automatically check if the measured loop impedance for TN (or earth loop for TT) is low enough to trip (disconnect) the MCB / Fuse / RCD giving the result of PASS or FAIL on the display.

SPD test

SPD (Surge Protection Device) which contains varistor can be tested measuring the tripping voltage without damage it.

PAT test

PAT test (PAT = Portable Appliance Tester) It is possible to check the insulation resistance and earth bond continuity of portable appliances for class I and II.

Connectivity

Use the PC application KEW Report to improve work efficiency.

KYORITSU 6516 can download the test data by connecting the USB adaptor (Model 8212-USB) and then print complete Test Reports by a PC.

The post Kyoritsu 6516 Multi Function Electrical Tester appeared first on Obiat Electronics.

• Large transformer jaws of 68mm diameter
• Able to clamp on all three or four wires (3 phases) together for leakage current measurement.
• True RMS enables an accurate measurement for distorted waveforms.
• Measurement from mA up to AC 1000A
• Frequency filter switch to eliminate the effect of the harmonics.
• 2 way analogue output terminal
• Resolution 0.1mA
• Data-hold function.
• Peak-hold function.
• Minimises the effects of stray magnetic fields.
• Rotary switch for easy one finger operation.
• LCD screen with backlight.

Using the Kyoritsu 2413R Leakage Clamp Meter

KYORITSU 2413R Leakage Clamp Meter Specifications:

Using the AC & DC Output Connector of the KYORITSU 2413R

The post KYORITSU 2413R Leakage Clamp Meter / 1000A appeared first on Obiat Electronics.

KYORITSU 3023A Digital Insulation & Continuity Tester

KYORITSU 3023A is a 4-range digital insulation resistance tester with 100/250/500/1000V Test Voltages. The 100V range is suitable for the testing of telecommunication cables. Resistance measurement with audible Continuity check function are also available.

KYORITSU 3023A Features:

• Fast response and quick insulation test.
• Fast Result Display in one second
• 100/250/500/1000V Test Voltages
• Three functions in one unit, insulation test with 4 voltage ranges, continuity test, AC voltage measurement
• 200mA measuring current on continuity testing
• Comparator function with PASS / FAIL and buzzer
• 0Ω adjustment at continuity measuring range
• Memory function up to 99 data
• Backlight LCD provides easy reading in dark locations
• Safety lock system prevents an erroneous operation on 500 and 1000 Volt ranges
• Safety standard IEC 61010-01 CAT III 600V

KYORITSU 3023A Specifications:

Insulation resistance

The post KYORITSU 3023A Digital Insulation & Continuity Tester appeared first on Obiat Electronics.

The Kyoritsu 2056R is a digital clamp meter is designed to meet international safety standard IEC 61010-1 CAT IV 600V and has the capability to read current up to 1000A AC/DC. The 2056R model features True RMS measurements providing greater accuracy on non-sinusoidal  and distorted waveforms.

The Kyoritsu 2056R also features a data hold function and peak hold function, as well as the ability to measure resistance up to 60MΩ. Temperature can be measured using an additional probe (not supplied) and capacitance can be tested. In addition, a max/min function is available to display the maximum and minimum values during a set period of time.

Furthermore, the tester has a non-contact voltage function, warning the user of AC voltage via a red LED indicator. Ergonomically designed, the Kyoritsu 2056R comprises a double moulded construction and features a bar graph display with backlight, for testing in low light conditions.

Kyoritsu 2056R Features:

• Measures up to 1000A AC.
• True RMS.
• Measures up to 600V AC/DC.
• Capacitance test.
• Designed to meet international safety standard IEC 61010-1 CAT IV 600V.
• 40mm jaw size
• Max/min function.
• Temperature between -50°C amd +300°C (probe not supplied).
• Measures resistance up to 60MΩ.
• Peak hold function.
• Double moulded construction.
• Auto power off
• Data hold function.
• Bar graph display with backlight.

Kyoritsu 2056R Specifications:

The post Kyoritsu 2056R 1000A TRMS Digital AC/DC CAT IV Clamp Meter appeared first on Obiat Electronics.

• High test current up to 80mA yielding resolution of 0.001Ω on 2Ω range.
• Advanced Filtering method (based on FFT Fast Fourier Transform) reduces noise interference for obtaining stable measurements.
• Automatic and Manual selection of the Test Current Frequency in four bands (94/105/111/128Hz). In Automatic mode, KEW 4106 will select the most suitable Frequency.
• Several sub-results can be shown on the display: Resistance of the Auxiliary Earth Spikes, Frequency of Test Current, Voltage and Frequency of Interference (noise), Residual Resistance Rk, etc.
• Warning for excessive noise and high Auxiliary Earth Spikes resistance.
• Large Graphic Display with backlight for readings in poorly illuminated areas.
• Up to 800 measurement results can be saved in the memory and recalled on the display.
• The stored results can be transferred to a PC using the “KEW Report” software and a USB adaptor (Model 8212-USB) which are included.
• Robust design with IP54 protection.

Earth Resistance Measurements with 4, 3 and 2 Wires

Kyoritsu 4106 Earth & Ground Resistance Tester Specifications:

The post Kyoritsu 4106 Earth & Ground Resistance Tester appeared first on Obiat Electronics.

• Power Quality Analysis: Reference voltage, Swell, Dip, Short power Interruptions.
• Variation of the measured voltage and current data can be confirmed simultaneously on the PC display monitor.
• Large capacity for storing 60,000 data points when 1 channel is used, and when all the three channels are used, 20,000 data points per channel can be recorded.
• Lowpass Filter will filter out the harmonics (cutoff frequency = approx. 160Hz)
• LED flickers when the preset current / voltage value is exceeded

• The following can be displayed: number of recorded data points, (max+ min+ peak) value for each channel complete with time/date information in the Normal recording mode. (Detected values (i.e. when values are outside preset limits ) can be displayed in other recording modes)
• The last 10 recorded data points including time/date can be recalled on the logger display
• Selection of One-time mode or Endless mode:
  One-time on: Recording will stop when memory is used up
  One-time off: Overwrite the old data, and store the latest data
• Non Volatile Memory: Recorded data will be retained even if the batteries are exhausted or replaced due to the presence of a nonvolatile memory (guaranteed for 10 years)
• Battery power indicator: Indicates battery voltage in 4-levels (It is possible to use the logger for a further approx. 24 hours even after the warming symbol is flashing)
• User-friendly PC software “KEW LOG Soft 2” is supplied
• Permits editing, analysis and graphical display of data.
• Recorded data is downloadable onto a PC via USB cable.
• Simplified Power Integration: (The “KEW LOG Soft 2” uses current and voltage recorded to calculate the integral power consumption).

Kyoritsu 5020 TRMS 3-Channel Data Logger Specifications:

The post Kyoritsu 5020 TRMS Current / Voltage Data Logger appeared first on Obiat Electronics.

Kyoritsu 2510 Features:

• Memory function stores up to 192000 data useful for monitoring the signals over time and fault finding
• Transfers data to PC via Bluetooth
• Top class measurement 0.2% accuracy
• 6mm clamp jaw is easy to use in tight places
• LED light for illuminating the measurement spot
• Analog output terminal to allow the connection to a recorder or a digital multimeter

Kyoritsu 2510 DC Milliamp Process Clamp Applications:

• Residential
• Industrial
• Commercial
• Electrical Engineering
• Electronic Testing

Kyoritsu 2510 Specifications

See Datasheet above for full specifications:

The post Kyoritsu 2510 Milliamp Process Clamp Logger appeared first on Obiat Electronics.

The Kyoritsu 2500 is a high precision millliamp clamp meter with a specified 0.02% accuracy. Possessing a 0.01mA resolution, the 2500 model is capable of measuring DC current from 0.01mA to 120mA.

The Kyoritsu 2500 DC Milliamp Process Clamp Meter is ideal in maintaining and troubleshooting process and automation equipment without breaking the loop and interuppting the process.

The Kyoritsu 2500 DC Milliamp Process Clamp Meter comprises a 6mm clamp jaw, allowing the meter to be utilised in tight working conditions. An analog output terminal is also present on the tester, providing the ability to integrate a recorder or logger.

Kyoritsu 2500 DC Milliamp Process Clamp Meter Specifications:

The post Kyoritsu 2500 Milliamp Process Clamp Meter appeared first on Obiat Electronics.

Using the Kyoritsu 3128 High Voltage Insulation Tester insulation resistances can be measured up to 35TΩ, with test voltages up to 12kV

Kyoritsu 3128 12kV High Voltage Insulation Tester Specifications:

The post Kyoritsu 3128 12kV High Voltage Insulation Tester appeared first on Obiat Electronics.

Kyoritsu 6201A Portable Appliance Tester

Portable appliance testing (commonly known as “PAT”, “PAT Inspection” or as “PAT Testing”) is the name of a process by which electrical appliances are routinely checked for safety. The formal term for the process is “in-service inspection & testing of electrical equipment”.

Testing involves a visual inspection of the equipment and any flexible cables for good condition, and also where required, verification of earthing (grounding) continuity, and a test of the soundness of insulation between the current carrying parts, and any exposed metal that may be touched.

The Kyoristu 6201A is a highly reliable, easy to use and reliable portable appliance tester with fast testing times and easy test selection – just by turn the rotary dial to the test you require and it will automatically complete the tests in less than 5 seconds. The Kyoritsu 6201A also features a convenient auto test sequencing function. When the test is complete, the 6201A’s LCD display will indicate a PASS or FAIL with its four LED lights.

The Kyoritsu 6201A Portable Appliance Tester is suitable for performing tests as required by the following standards.
AS/NZS 3760 In-service safety inspection and testing of electrical equipment.

Kyoritsu 6201A Portable Appliance Tester Specifications:

Test Function

The post Kyoritsu 6201A Portable Appliance Tester appeared first on Obiat Electronics.