Insulation / Continuity Testers Archives - Obiat Electronics https://obiat.com.au/product-category/kyoritsu/insulation-continuity-testers-kyoritsu/ keeping your industry up and running Mon, 01 Jul 2024 07:34:44 +0000 en-AU hourly 1 https://wordpress.org/?v=6.9 https://obiat.com.au/wp-content/uploads/2016/05/obiat_logo_2-100x100.jpg Insulation / Continuity Testers Archives - Obiat Electronics https://obiat.com.au/product-category/kyoritsu/insulation-continuity-testers-kyoritsu/ 32 32 Kyoritsu 6516 Multi Function Electrical Tester https://obiat.com.au/product/kyoritsu-6516-multi-function-electrical-tester/ Wed, 07 Oct 2020 03:30:16 +0000 https://obiat.com.au/?post_type=product&p=60168

The KYORITSU 6516 & 6516BT Multi-Function electrical testers have eight test functions in the one instrument.

  • Continuity test
  • Insulation resistance test
  • Loop impedance test (High current measurement, No trip (ATT) measurement) 4 Prospective short circuit current test (On Loop impedance function)
  • RCD test
  • Voltage test
  • Phase rotation test 8 Earth test

The Kyoritsu 6516 tester incorporates Anti Trip Technology (ATT) which electronically bypasses RCDs when performing loop impedance tests. This saves time and money by not having to take the RCD out of the circuit during testing and is a safer procedure to follow.

With the ATT function enabled, a test of 15mA or less is applied between line & earth. It enables loop impedance measurements without tripping RCDs rated at 30mA and above.

ATT supports measurements using three wires: Line, Earth, and Neutral and also two wires: Line and Earth.

Also available is the Kyoritsu 6516BT with Bluetooth

    Kyoritsu 6516-6516BT Datasheet

    Kyoritsu 6516-6516BT User Manual

The post Kyoritsu 6516 Multi Function Electrical Tester appeared first on Obiat Electronics.

]]> Kyoritsu 6516 Multi Function Electrical Tester Features
DISPLAY  ・Color LCD 3.5 inches dot matrix.
ATT  ・Anti-Trip Technology (with 2 & 3 wire) for no trip LOOP L-PE testing on all RCDs.
・With 2 wire only, very useful in case of no Neutral (i.e. 3-phase motor lines).
LOOP  ・High test current range of 2Ω with 0.001Ω resolution.
・Zs Limit compares the values required by Electrical Installations Standard with measured results.
RCD   ・Type AC, A, F, B(General & Selective), EV and Variable RCDs.
・Single and Auto test, Ramp test and Contact voltage.
EARTH ・Earth resistance test 2 and 3 wires with all accessories included.
INSULATION  ・Resistance test 100, 250, 500 & 1000V with auto discharge voltage.
CONTINUITY ・Continuity test at 200mA or 15mA with selectable buzzer for fast judgment.
PHASE ROTATION  ・On 3-phase lines with clear indication of the sequence on the display.
VOLTS  ・TRMS Voltage measurements 2-600V, Mains Frequency.
HELP   ・Display shows how to connect the instrument according to the function selected.
SPD    ・Surge Protection Device test, for SPD that uses varistor.
PAT  ・Portable Appliance Tester function, for Insulation & Protective conductor resistance test
SAFETY    ・IEC 61010-1 CAT IV 300 V, CAT III 600 V. IEC 61557-1,2,3,4,5,6,

Bluetooth communication

Kyoritsu 6516BT has a Bluetooth communication function and can exchange data with Android/ iOS tablet devices.

Before starting to use this function, download the special application “KEW Smart *” via the internet.

Large LCD & HELP function

  • All the test data is shown in one large colored screen.
  • HELP function will show how to connect the instrument according to the function selected

Operation in 3 simple steps & Hands free testing

  1. Set the rotary dial to your testing range.
  2. Connect the instrument to the installation under test.
  3. Press the test button.(By remote probe or using the Lockdown function of the test button.)

 

Anti-Trip Technology (with 2 & 3 wire)

For no trip LOOP L-PE testing on all RCDs.
With 3 wire (L, N, PE), to get the best accuracy readings.
With 2 wire only, very useful in case of no Neutral (i.e. 3-phase motor lines).

Loop Impedance 0.001 resolution

High test current range of 2Ω with 0.001Ω resolution.

Zs/Ra Limit

Zs Limit compares the values required by Electrical Installations Standard with measured results.

The verification of safety requirement on an electrical installation is simplified by using Zs/Ra Limit function. This function will automatically check if the measured loop impedance for TN (or earth loop for TT) is low enough to trip (disconnect) the MCB / Fuse / RCD giving the result of PASS or FAIL on the display.

 

SPD test

SPD (Surge Protection Device) which contains varistor can be tested measuring the tripping voltage without damage it.

 

PAT test

PAT test (PAT = Portable Appliance Tester) It is possible to check the insulation resistance and earth bond continuity of portable appliances for class I and II.

 

Connectivity

Use the PC application KEW Report to improve work efficiency.

KYORITSU 6516 can download the test data by connecting the USB adaptor (Model 8212-USB) and then print complete Test Reports by a PC.

 

 

 

The post Kyoritsu 6516 Multi Function Electrical Tester appeared first on Obiat Electronics.

]]> KYORITSU 3023A Digital Insulation & Continuity Tester https://obiat.com.au/product/kyoritsu-3023a-digital-insulation-continuity-tester/ Tue, 19 Feb 2019 06:32:07 +0000 https://obiat.com.au/?post_type=product&p=28103

The Kyoritsu 3023A is the ideal insulation tester for any electrician. It's Digital Display allows better accuracy, easier reading of results and faster testing. It is the perfect instrument if you are upgrading from an analogue insulation tester.

Main Features:

• 100/250/500/1000V Test Voltages
• Fast response and quick insulation test. (1 second result display)
• Three functions in one unit, insulation test with 4 voltage ranges, continuity test, AC voltage measurement
• 200mA measuring current on continuity testing

    Kyoritsu 3023A Datasheet

    Kyoritsu 3023A User Manual

The post KYORITSU 3023A Digital Insulation & Continuity Tester appeared first on Obiat Electronics.

]]>

KYORITSU 3023A Digital Insulation & Continuity Tester

KYORITSU 3023A is a 4-range digital insulation resistance tester with 100/250/500/1000V Test Voltages. The 100V range is suitable for the testing of telecommunication cables. Resistance measurement with audible Continuity check function are also available.

KYORITSU 3023A Features:

• Fast response and quick insulation test.
• Fast Result Display in one second
• 100/250/500/1000V Test Voltages
• Three functions in one unit, insulation test with 4 voltage ranges, continuity test, AC voltage measurement
• 200mA measuring current on continuity testing
• Comparator function with PASS / FAIL and buzzer
• 0Ω adjustment at continuity measuring range
• Memory function up to 99 data
• Backlight LCD provides easy reading in dark locations
• Safety lock system prevents an erroneous operation on 500 and 1000 Volt ranges
• Safety standard IEC 61010-01 CAT III 600V

KYORITSU 3023A Specifications:

Insulation resistance

Test voltage 100/250/500/1000V
Measuring range
(Auto range)		 4.000/40.00/200.0MΩ (100V)
4.000/40.00/400.0/2000MΩ (250/500/1000V)
Mid-scale value 5MΩ (100/250V)
50MΩ (500/1000V)
First effective measuring range 0.2 – 20MΩ (100V)
0.2 – 40MΩ (250V)
0.2 – 200MΩ (500V)
0.2 – 1000MΩ (1000V)
Accuracy ±2%rdg±6dgt
Second effective measuring range lower 0.110 – 0.199MΩ
Second effective measuring range upper 20.01 – 200.0MΩ (100V)
40.01 – 2000MΩ (250V)
200.1 – 2000MΩ (500V)
1001 – 2000MΩ (1000V)
Accuracy ±5%rdg±6dgt
Rated current DC 1 – 1.2mA
Output short circuit current 1.5mA max

Ω/Continuity

Auto range 40.00/400.0Ω
Accuracy ±2%rdg±8dgt
Output voltage on open circuit 5V±20%
Output short circuit current DC 220±20mA
Fuse Quick acting ceramic fuse 0.5A/600V (Ø6.35×32mm)

AC Voltage

AC voltage range AC 20 – 600V (50/60Hz)
DC -20 – -600V/+20 – +600V
Accuracy ±3%rdg±6dgt

General

Applicable standards IEC 61010-1 CAT III 600V, IEC 61557-1,2,4, IEC 61326-1 (EMC), IEC 60529 (IP40)
Power source R6 × 6 or LR6 × 6
Dimensions / Weight 105(L) × 158(W) × 70(D)mm / 600g approx.
Included Accessories 7150A (Remote control switch set),
9121 (Shoulder strap), R6 (AA) × 6, Instruction Manual
Optional Accessories 7115 (Extension Probe), 8016 (Hook type prod),
8923 (Fuse [0.5A/600V]), 9089 (Carrying Case)

The post KYORITSU 3023A Digital Insulation & Continuity Tester appeared first on Obiat Electronics.

]]> Kyoritsu 3128 12kV High Voltage Insulation Tester https://obiat.com.au/product/kyoritsu-3128-12kv-high-voltage-insulation-tester/ Wed, 12 Sep 2018 06:44:35 +0000 https://obiat.com.au/?post_type=product&p=16860

The Kyoritsu 3128 is a digital CAT IV High Voltage Insulation Tester with capabilities of testing insulation resistance up to 35TΩ at test voltages up to 12kV. The Kyoritsu 3128 model is designed for field use with an IP64 rating and features a large backlit LCD display.

• Microprocessor controlled high voltage insulation resistance tester with Diagnostic functions.
• Suitable for analyzing the insulation characteristics of cables, transformers, motors, generators, high-pressure switches, insulators, wiring installations, etc.
• 6 ranges: 500V, 1000V, 2500V, 5000V, 10000V, 12000V
Fine adjustment of voltage setting at each range is also possible
• Graphic representation of the insulation resistance and leakage current versus time on large display with bar graph and backlight.
• Can be operated from built-in rechargeable battery or from AC line.
• Automatic discharge after test with monitoring of the discharge voltage.
• Internal memory can store about 43,000 data (max).
• Robust design for field use with IP64 rating (with lid closed)

    Kyoritsu-3128-Datasheet

The post Kyoritsu 3128 12kV High Voltage Insulation Tester appeared first on Obiat Electronics.

]]> The Kyoritsu 3128 12kV High Voltage Insulation Tester is a microprocessor controlled tester and includes various diagnostic functions that provide the ability to test the polarization index (PI), the dielectric absorption ratio (DAR) and the dielectric discharge (DD). Step voltage (SV) measurements can be made where successive voltage increments are implemented to test the degradation of insulation.7

Using the Kyoritsu 3128 High Voltage Insulation Tester insulation resistances can be measured up to 35TΩ, with test voltages up to 12kV

Kyoritsu 3128 12kV High Voltage Insulation Tester Specifications:

Insulation resistance (*): Accuracy is not guaranteed with setting of 250V or less

Rated voltage 500V 1000V 2500V 5000V 10000V 12000V
Max measurement value 500GΩ 1TΩ 2.5TΩ 5TΩ 35TΩ
Accuracy 400k～50GΩ ±5%rdg±3dgt
(*)		 800k～100GΩ 5%rdg±3dgt 2M～250GΩ ±5%rdg±3dgt 4M～500GΩ ±5%rdg±3dgt 8M～1TΩ ±5%rdg±3dgt
50G～500GΩ
±20%rdg
(*)		 100G～1TΩ
±20%rdg		 250G～2.5TΩ
±20%rdg		 500G～5TΩ
±20%rdg		 1T～10TΩ
±20%rdg
10T – 35TΩ
Values are displayed, but accuracy isn’t guaranteed
Short circuit current Max 5.0mA
Load resistor to output rated voltage 0.5MΩ or more 1MΩ or more 2.5MΩ or more 5MΩ or more 20MΩ or more 24MΩ or more

Output voltage

Rated voltage 500V 1000V 2500V 5000V 10000V 12000V
Monitor accuracy ±10%±20V ±10%±20V ±10%±20V ±10%±20V ±10%±20V ±10%±20V
Output accuracy 0 – +20% 0 – +10% 0 – +10% 0 – +10% -5 – +5% -5 – +5%
Selectable range 50 – 600V
(in steps of 5V)		 610 – 1200V (in steps of 10V) 1225 – 3000V (in steps of 25V) 3050 – 6000V (in steps of 50V) 6100 –
10000V (in steps of 100V)		 10100 – 12000V (in steps of 100V)

Voltage measurement

Measuring range DCV：±30 ～ ±600V、ACV：30 ～ 600V （50/60Hz）
Accuracy ±2%rdg±3dgt

Current measurement

Measuring range 5.00nA – 2.40mA (Depending on the insulation resistance)

Capacitance measurement

Measuring range 5.0nF ～ 50.0μF
(500V/1000V/2500V/5000V)		 5.0nF – 1.0µF (display range: 5.0nF – 50.0µF) (10000V/12000V)
Accuracy ±5%rdg±5dgt

General

Applicable standards IEC 61010-1 CAT IV 600V Pollution degree 2,
IEC 61010-031, IEC 61326, IEC 60529 (IP64): with the lid closed.
Operating temperature & humidity range -10ºC – Relative humidity 85% or less
50ºC /(when operating with an external power supply, no condensation)
0ºC – 40ºC /Relative humidity 85% or less
(when operating with battery, no condensation)
Storage temperature & humidity range -20ºC – 60ºC / Relative humidity 75% or less (no condensation)
Power source Rechargeable Lead storage battery (12V)*
Charging time: approx. 8 hours / AC Power supply (100V – 240V, 50/60Hz)
* Continuous measuring time:
approx. 4 hours
(a load of 100MΩ at the Insulation resistance 12000V Range.)
approx. 2 hours
(Max current consumption in range while rated currents are maintained.)
Dimensions 330 (L) × 410 (W) × 180 (D) mm *Instrument and Hard case
Weight 9kg approx. (including battery) *Instrument and Hard case
Included Accessories 7170 (Main cord), 7224A (Earth cord), 7225A (Guard cord), 7226A (Line probe),
7227A (Line probe with alligator clip), 8029 (Extension prod),
8212-USB-W (USB adaptor with KEW Windows (Software)),
Instruction manual
Optional Accessories 7254 (Longer Line probe with alligator clip)

The post Kyoritsu 3128 12kV High Voltage Insulation Tester appeared first on Obiat Electronics.

]]> KYORITSU 3125 High Voltage Insulation Tester https://obiat.com.au/product/kyoritsu-3125-high-voltage-insulation-tester/ https://obiat.com.au/product/kyoritsu-3125-high-voltage-insulation-tester/#respond Sun, 20 Mar 2016 20:16:32 +0000 http://sitebuilds.net/rapidtech/?post_type=product&p=1914 Kyoritsu_Logo_main

Wide range measurements from 500V to 5000V and up to 1000GΩ.

  • Large digital display with Bar Graph indication and back light.
  • Polarization Index measurement (PI).
  • Timer measurement function.
  • Indication of Output voltage and Discharge voltage.
  • Auto-discharge function and Voltage output warning function.
  • Auto power off and Battery Check.
  • Safety standard IEC 61010-1 CAT III 600V

The post KYORITSU 3125 High Voltage Insulation Tester appeared first on Obiat Electronics.

]]> Kyoritsu 3125 High Voltage Insulation Tester

Featuring a large digital display with bar graph indication and back light, the Kyoritsu 3125 High Voltage Insulation Tester has a wide range measurements and a timer measurement function.

  • Wide range measurements from 500V to 5000V and up to 1000GΩ.
  • Polarization Index measurement (PI).
  • Indication of Output voltage and Discharge voltage.
  • Auto-discharge function and Voltage output warning function.
  • Auto power off and Battery Check.
  • Safety standard IEC 61010-1 CAT.III 600V

Specification:

Measuring range

500V : 0.0~99.9MΩ/100~999MΩ

1000V : 0.0~99.9MΩ/100~999MΩ/1.00~1.99GΩ

2500V : 0.0~99.9MΩ/100~999MΩ/1.00~9.99GΩ/10.0~99.9GΩ

5000V : 0.0~99.9MΩ/100~999MΩ/1.00~9.99GΩ/10.0~99.9GΩ/100~1000GΩ/(1TΩ)

Accuracy

500V : ±5%rdg/±3dgt

1000V : ±5%rdg/±3dgt

2500V : ±5%rdg /±3dgt

5000V : ±5%rdg / ±3dgt /±20%(100GΩ or more)

Short Circuit Current : 1.3mA approx.

Rated test Current

500V : 1mA to 1.2mA at 0.5MΩ load

1000V : 1mA to 1.2mA at 1MΩ load

2500V : 1mA to 1.2mA at 2.5MΩ load

5000V : 1mA to 1.2mA at 5MΩ load

Open circuit voltage

500VDC : +30% , -0%

1000VDC : +20% , -0%

2500VDC : +20% , -0%

5000VDC : +20% , -0%

Maximum display: 999 Counts (1000 counts only at 1000GΩ)

Current consumption : About 1000mA (During measurement)

Withstand VoltageSafety standard 5320V AC for 5 seconds IEC 61010-1 CAT.III 600V, pollution Degree 2

Power supply DC12V : R14×8

Dimensions 205(L) × 152(W) × 94(D)mm

Weight 1.8kg approx.

Accessories:

  • 7165A (Line probe)
  • 7224A (Earth cord)
  • 7225A (Guard cord)
  • 8019 (Hook type prod)
  • 9124 (Carrying case [Hard])
  • LR14×8pcs (Alkaline battery size)
  • Instruction Manual

 

The post KYORITSU 3125 High Voltage Insulation Tester appeared first on Obiat Electronics.

]]> https://obiat.com.au/product/kyoritsu-3125-high-voltage-insulation-tester/feed/ 0 KYORITSU 3132A Compact Insulation & Continuity Tester https://obiat.com.au/product/kyoritsu-3132a-compact-insulation-continuity-tester/ https://obiat.com.au/product/kyoritsu-3132a-compact-insulation-continuity-tester/#respond Thu, 17 Mar 2016 23:07:25 +0000 http://sitebuilds.net/rapidtech/?post_type=product&p=1825 Kyoritsu_Logo_main

  • Kyoritsu 3132A - 1000V Analogue Insulation-Continuity Tester
  • A highly compact and easy to use insulation and continuity tester.
  • Rugged Taut Band meter movement
  • Designed to strict CAT III 600V safety standards
  • IP54 RATED. The Kyoritsu 3132A has 3 insulation test ranges.
  • A 3 ohm continuity range and a 500 ohm resistance range.

CE

The post KYORITSU 3132A Compact Insulation & Continuity Tester appeared first on Obiat Electronics.

]]> Kyoritsu 3132A is an analogue tester with five ranges for insulation resistance measurement and continuity testing (resistance tests) of low voltage installations. Designed to safety standards: IEC 61557-1 (General requirements for measuring equipment for low voltage distribution systems) IEC 61557-2 (Equipment for insulation resistance measurement for low voltage distribution systems) IEC 61557-4 (Equipment for resistance tests for low voltage distribution systems) Dust and drip proof construction to IP54

  • The Kyoritsu 3132A has always been a popular choice because of its price and simplicity for insulation testing.
  • Test Voltage: 250V / 500V / 1000V
  • Measuring Range: 100MΩ, 200MΩ, 400MΩ
  • Voltage Measuring Range – 0~600V AC
  • Easy to read scale means no confusing digital readings.
  • Zero out your trailing lead resistance so you don’t need to subtract the resistance of your trailing earth lead every time you test.
  • •1mA rated test current at the maximum resistance.
  • 200mA short circuit current on continuity testing.
  • Automatic discharge of circuit capacitance. (any charge stored in the circuit under test will be automatically discharged after testing.)
  • Live circuit warning buzzer and neon lamp.
  • Small and lightweight. Shock resistant new case material.
  • AC voltmeter with linear, easy-to-read scale.
  • CAT III 600V
  • Runs on 6 x AA batteries

The post KYORITSU 3132A Compact Insulation & Continuity Tester appeared first on Obiat Electronics.

]]> https://obiat.com.au/product/kyoritsu-3132a-compact-insulation-continuity-tester/feed/ 0