Portable Appliance Testers Archives - Obiat Electronics https://obiat.com.au/product-category/kyoritsu/portable-appliance-testers-kyoritsu/ keeping your industry up and running Mon, 01 Jul 2024 07:34:44 +0000 en-AU hourly 1 https://wordpress.org/?v=6.9 https://obiat.com.au/wp-content/uploads/2016/05/obiat_logo_2-100x100.jpg Portable Appliance Testers Archives - Obiat Electronics https://obiat.com.au/product-category/kyoritsu/portable-appliance-testers-kyoritsu/ 32 32 Kyoritsu 6516 Multi Function Electrical Tester https://obiat.com.au/product/kyoritsu-6516-multi-function-electrical-tester/ Wed, 07 Oct 2020 03:30:16 +0000 https://obiat.com.au/?post_type=product&p=60168

The KYORITSU 6516 & 6516BT Multi-Function electrical testers have eight test functions in the one instrument.

  • Continuity test
  • Insulation resistance test
  • Loop impedance test (High current measurement, No trip (ATT) measurement) 4 Prospective short circuit current test (On Loop impedance function)
  • RCD test
  • Voltage test
  • Phase rotation test 8 Earth test

The Kyoritsu 6516 tester incorporates Anti Trip Technology (ATT) which electronically bypasses RCDs when performing loop impedance tests. This saves time and money by not having to take the RCD out of the circuit during testing and is a safer procedure to follow.

With the ATT function enabled, a test of 15mA or less is applied between line & earth. It enables loop impedance measurements without tripping RCDs rated at 30mA and above.

ATT supports measurements using three wires: Line, Earth, and Neutral and also two wires: Line and Earth.

Also available is the Kyoritsu 6516BT with Bluetooth

    Kyoritsu 6516-6516BT Datasheet

    Kyoritsu 6516-6516BT User Manual

The post Kyoritsu 6516 Multi Function Electrical Tester appeared first on Obiat Electronics.

]]> Kyoritsu 6516 Multi Function Electrical Tester Features
DISPLAY  ・Color LCD 3.5 inches dot matrix.
ATT  ・Anti-Trip Technology (with 2 & 3 wire) for no trip LOOP L-PE testing on all RCDs.
・With 2 wire only, very useful in case of no Neutral (i.e. 3-phase motor lines).
LOOP  ・High test current range of 2Ω with 0.001Ω resolution.
・Zs Limit compares the values required by Electrical Installations Standard with measured results.
RCD   ・Type AC, A, F, B(General & Selective), EV and Variable RCDs.
・Single and Auto test, Ramp test and Contact voltage.
EARTH ・Earth resistance test 2 and 3 wires with all accessories included.
INSULATION  ・Resistance test 100, 250, 500 & 1000V with auto discharge voltage.
CONTINUITY ・Continuity test at 200mA or 15mA with selectable buzzer for fast judgment.
PHASE ROTATION  ・On 3-phase lines with clear indication of the sequence on the display.
VOLTS  ・TRMS Voltage measurements 2-600V, Mains Frequency.
HELP   ・Display shows how to connect the instrument according to the function selected.
SPD    ・Surge Protection Device test, for SPD that uses varistor.
PAT  ・Portable Appliance Tester function, for Insulation & Protective conductor resistance test
SAFETY    ・IEC 61010-1 CAT IV 300 V, CAT III 600 V. IEC 61557-1,2,3,4,5,6,

Bluetooth communication

Kyoritsu 6516BT has a Bluetooth communication function and can exchange data with Android/ iOS tablet devices.

Before starting to use this function, download the special application “KEW Smart *” via the internet.

Large LCD & HELP function

  • All the test data is shown in one large colored screen.
  • HELP function will show how to connect the instrument according to the function selected

Operation in 3 simple steps & Hands free testing

  1. Set the rotary dial to your testing range.
  2. Connect the instrument to the installation under test.
  3. Press the test button.(By remote probe or using the Lockdown function of the test button.)

 

Anti-Trip Technology (with 2 & 3 wire)

For no trip LOOP L-PE testing on all RCDs.
With 3 wire (L, N, PE), to get the best accuracy readings.
With 2 wire only, very useful in case of no Neutral (i.e. 3-phase motor lines).

Loop Impedance 0.001 resolution

High test current range of 2Ω with 0.001Ω resolution.

Zs/Ra Limit

Zs Limit compares the values required by Electrical Installations Standard with measured results.

The verification of safety requirement on an electrical installation is simplified by using Zs/Ra Limit function. This function will automatically check if the measured loop impedance for TN (or earth loop for TT) is low enough to trip (disconnect) the MCB / Fuse / RCD giving the result of PASS or FAIL on the display.

 

SPD test

SPD (Surge Protection Device) which contains varistor can be tested measuring the tripping voltage without damage it.

 

PAT test

PAT test (PAT = Portable Appliance Tester) It is possible to check the insulation resistance and earth bond continuity of portable appliances for class I and II.

 

Connectivity

Use the PC application KEW Report to improve work efficiency.

KYORITSU 6516 can download the test data by connecting the USB adaptor (Model 8212-USB) and then print complete Test Reports by a PC.

 

 

 

The post Kyoritsu 6516 Multi Function Electrical Tester appeared first on Obiat Electronics.

]]> Kyoritsu 6201A Portable Appliance Tester https://obiat.com.au/product/kyoritsu-6201a-portable-appliance-tester/ Thu, 12 Jul 2018 08:11:26 +0000 https://obiat.com.au/?post_type=product&p=12660

The KEW 6201A is a portable appliance tester, performing four functions to ensure the Safety of Class 1 & Class II appliances. And also can measure the mains voltage.
Readings are displayed on a large liquid crystal display (LCD) below which are four LEDs which unambiguously display a pass or fail indication for threshold values dictated by AS/NZS 3760.

    Kyoritsu-6201A-User-Manual

The post Kyoritsu 6201A Portable Appliance Tester appeared first on Obiat Electronics.

]]>

Kyoritsu 6201A Portable Appliance Tester

Portable appliance testing (commonly known as “PAT”, “PAT Inspection” or as “PAT Testing”) is the name of a process by which electrical appliances are routinely checked for safety. The formal term for the process is “in-service inspection & testing of electrical equipment”.

Testing involves a visual inspection of the equipment and any flexible cables for good condition, and also where required, verification of earthing (grounding) continuity, and a test of the soundness of insulation between the current carrying parts, and any exposed metal that may be touched.

The Kyoristu 6201A is a highly reliable, easy to use and reliable portable appliance tester with fast testing times and easy test selection – just by turn the rotary dial to the test you require and it will automatically complete the tests in less than 5 seconds. The Kyoritsu 6201A also features a convenient auto test sequencing function. When the test is complete, the 6201A’s LCD display will indicate a PASS or FAIL with its four LED lights.

The Kyoritsu 6201A Portable Appliance Tester is suitable for performing tests as required by the following standards.
AS/NZS 3760 In-service safety inspection and testing of electrical equipment.

Kyoritsu 6201A Portable Appliance Tester Specifications:

Test Function

Function Tests of contents
Test ⅠClass Protective conductor resistance
Insulation (250V or 500V)
Test ⅠSELECT Switch + Class Protective conductor resistance
Leakage Current test
TestⅡClass Insulation (250V or 500V)
TestⅡSELECT Switch + Class Leakage Current test
Extension Leads test Protective conductor resistance
Insulation P/N-PE
Polarity
SELECT Switch + Extension Leads test Protective conductor resistance
Leakage Current test
Leakage Current Test Leakage current measurement

RPE 20Ω Protective Conductor Resistance Test

Measuring range  0 – 15.00Ω
Resolution of measurement 10mΩ
Open circuit voltage < AC 12V
Measuring current 10A AC nominal value
Accuracy ±3%rdg±5dgt

RINS 200MΩ Insulation Resistance

Rating 250V/20MΩ 500V/20MΩ
Measuring range 0 – 19.99Ω
Resolution of measurement 10kΩ
Output voltage 250V DC (+20%/-10%) @1MΩ 500V DC (+20%/-10%) @1MΩ
Short circuit current 2.5mA DC or less
Accuracy ±2%rdg±3dgt

Leakage Current Test

Measuring range AC 0.1 – 19.99mA
Resolution of measurement 0.01mA
Examination time Max 15 seconds
Accuracy ±3%rdg±5dgt

AC VOLT Mains Voltage Check

Measuring range 207 – 264V
Resolution of measurement 1V
Accuracy ±2%rdg±3dgt

General

Supply voltage 240V±10%
Frequency 50Hz±1%
Applicable standards IEC 61010-1 CAT III 300V Pollution Degree2
IEC 61326-1 (EMC)
Dimensions 167(L) × 185 (W) × 89 (D) mm
Weight 1.2kg (only the instrument body)
Included Accessories 7123 (Power cord [AU])
7129A (Test leads with alligator clip)
7161A (Flat test prod [black])
7140 (Adapter for exntesion cord)
9147 (Cord case)
9121 (Shoulder strap)
Instruction manual
Optional Accessories 7121B (Distribution board test leads)

The post Kyoritsu 6201A Portable Appliance Tester appeared first on Obiat Electronics.

]]> KYORITSU 6205 Portable Appliance Tester https://obiat.com.au/product/kyoritsu-6205-portable-appliance-tester/ Thu, 12 Jul 2018 07:51:03 +0000 https://obiat.com.au/?post_type=product&p=12654

KYORITSU 6205 Portable Appliance Tester – for Australia

Protect life and property from faulty appliances
・Complies to AS/NZS 3760
・Battery operated
・PASS / FAIL result
・Color status back light
・10 mA & 30 mA RCD test (Isolation transformer built in)
・Memory function up to 999 data
・Printer output

    Kyoritsu-6205-Datasheet

    Kyoritsu-6205-User-Manual

 

The post KYORITSU 6205 Portable Appliance Tester appeared first on Obiat Electronics.

]]> KYORITSU 6205 Portable Appliance Tester – Complies to AS/NZS 3760 for Australia

The KYORITSU 6205 Portable Appliance Tester is suitable for performing tests as required by the following standards – AS/NZS 3760 In-service safety inspection and testing of electrical equipment.


.

KYORITSU 6205 Portable Appliance Tester Specifications:

Test Function

Function Tests of contents
Class Ⅰ Test • Protective conductor resistance
(Test current 200mA DC nominal)
• Insulation resistance test (250V or 500V)
• Leakage current test (100-253V/50Hz)
• Load current test (100-253V/50Hz)
Class Ⅱ Test • Insulation resistance test (250V or 500V)
• Leakage current test (100-253V/50Hz)
• Load current test (100-253V/50Hz)
Extension Lead Test • Protective conductor resistance
(Test current 200mA DC nominal)
• Insulation resistance test
(between Line/Neutral-Earth short, Line/Neutral)
• Leakage current test (100-253V/50Hz)
• Polarity test
RCD Test • RCD test (10mA/30mA)

Mains voltage indlcation

Display range 30V-270V
Accuracy ±5V

Protective conductor resistance test

Measuring range 0.00-20.00Ω
Open circuit voltage 5V±0.4V DC
Measuring current 200mA DC(nominal value)
Accuracy ±3%rdg±5dgt

Insulation resistance test

Rated volatge 250V 500V
Measuring range 0.00-20.00MΩ
No-load voltage 250V DC +20%,-0% 500V DC +20%,-0%
Short circuit current 1.5mA DC or less
Accuracy ±2%rdg±3dgt

Load current/Leakage current test

Item Load current Leakage current
Mains voltage range 100-253V/50Hz
Measuring range 0.10-10.00A rms 0.10-20.00mA rms
Accuracy ±10%rdg±5dgt ±3%rdg±5dgt

RCD test

Rated voltage 230V -15% – +10%/50Hz
Rated current 10mA/30mA
Function × 1 × 5
Test duration 0.0ms-500.0ms 0.0ms-40.0ms
Operating time accuracy ±2ms(≦40ms),±8ms(>40ms)

General

Power source LR6(AA)(1.5V) × 6
Applicable Standards IEC/EN61010-1 CAT II 300V, IEC/EN61010-2-030,
IEC/EN61010-031, EN61326-2-2, AS/NZ3760
Dimentions / Weight 261(L) × 104(W) × 57(D)mm / Approx. 930g(including batteries)
Included Accessories 7277(Mains lead),
7129A(Test lead with Alligator clip),
7161A(Flat test prod),
7276(Adaptor for Extension cord),
9193(Carrying case),
8928(Fuse[10A/250V]),
9121(Shoulder strap),
Buckle, LR6(AA) x 6, Instruction manual
Optional Accessories 8263-USB(USB cable with “KEW Report(software)”),
7275(Printer cable:Mini Din 6pin-D-sub 9pin),
7248(Test lead with Alligator clip and Flat test probe)

The post KYORITSU 6205 Portable Appliance Tester appeared first on Obiat Electronics.

]]>