Martindale Archives - Obiat Electronics https://obiat.com.au/product-category/martindale-electric/ keeping your industry up and running Wed, 11 Sep 2019 00:50:17 +0000 en-AU hourly 1 https://wordpress.org/?v=6.9 https://obiat.com.au/wp-content/uploads/2016/05/obiat_logo_2-100x100.jpg Martindale Archives - Obiat Electronics https://obiat.com.au/product-category/martindale-electric/ 32 32 Martindale TL88 Three Wire 10A Fused Test Lead https://obiat.com.au/product/martindale-tl88/ Tue, 27 Aug 2019 06:07:51 +0000 https://obiat.com.au/?post_type=product&p=40976

The Martindale TL88 Three Wire (Red, Black & Green) 10A Fused Test Lead set is terminated with a standard IEC connector.
For use with loop & RCD testers.

The post Martindale TL88 Three Wire 10A Fused Test Lead appeared first on Obiat Electronics.

]]> Martindale 3 wire test lead set  (Red, Black & Green) with 2 10A fused probes and crocodile clips, fitted with IEC connector.

Suitable for the Martindale LP2000, RC2000 & EZ2500.

The post Martindale TL88 Three Wire 10A Fused Test Lead appeared first on Obiat Electronics.

]]> Martindale EZ2500 Non Trip Earth Loop Tester https://obiat.com.au/product/martindale-ez2500/ Tue, 27 Aug 2019 05:37:13 +0000 https://obiat.com.au/?post_type=product&p=40970

The Martindale EZ2500 non-trip earth loop impedance tester provides safe, switch-free operation for domestic, commercial and industrial applications.

The simple auto test sequence makes it ideal for where confirmation of safe earth loop impedance values are needed prior to installation of equipment and maintenance.

The auto test sequence means there is no need to worry about selecting the right type of loop test to avoid RCD tripping, it’s all done for you.

    EZ2500 Datasheet

    EZ2500 User Manual

The post Martindale EZ2500 Non Trip Earth Loop Tester appeared first on Obiat Electronics.

]]> The Martindale EZ2500 Non Trip Earth Loop Tester performs non-trip P-E and P-N loop impedance tests, PFC and PSC checks and lists all of the results on the clear backlit LCD display. A voltage check and confirmation of correct wiring is also performed.

The Martindale EZ2500 Non Trip Earth Loop Tester is supplied with a 10A Australian plug mains lead for testing for testing GPO outlets but an additional 3 wire test lead can be purchased (Martindale TL88) for testing at light fittings and fused connection units.

A soft carry case (TC210) and comprehensive manual are also included.

Martindale EZ2500 Non Trip Earth Loop Tester Features:

  • Non-trip and high current loop test
  • PFC & PSC test
  • Voltage and full socket wiring test
  • Smart and easy automatic testing
  • No batteries, ranges or switches
  • All results displayed together
  • HSE ‘professional socket tester

Martindale EZ2500 Specifications:

Nominal voltage rating 220-240V AC
Voltage range for wiring error detection 30-275V
Open loop indication If open PE or PN Loop is detected, no Impedance Measurement takes place
Measurement range for impedance 198-264V, 50Hz
PE loop impedance ranges 0-8.99Ω, 9.0-89.9Ω, 90-899Ω, 900-1699Ω, 1700-3000Ω
PE loop impedance accuracy 0-8.99Ω ± 4% ± 0.05Ω*9.0-89.9Ω ± 5% ± 0.5Ω*90-899Ω ± 5% ± 5Ω*900-1699Ω ± 5% ± 30Ω*1700-3000Ω indicative
PFC & PSC test
PN loop impedance ranges 0-8.99Ω, 9.0-89.9Ω, 90-899Ω, 900-1699Ω, 1700-3000Ω
PN loop impedance accuracy 0-8.99Ω ± 4% ± 0.05Ω*9.0-89.9Ω ± 5% ± 0.5Ω*90-899Ω, ± 5% ± 5Ω*900-1699Ω ± 5% ± 30Ω*1700-3000Ω indicative
Frequency accuracy ± 4 %
Voltage accuracy ± 4%
Temperature range -10° to 40° C at max 80 % Relative Humidity (Non-Condensing)
Supply from mains
Power consumption <1.6W
Pollution degree 2
Complies with BS EN 61010-1, BS EN 61557 & BS 7671
Weight 240g approx.
Dimensions 145 x 85 x 53mm
Includes TC210 carry case, mains lead and manual
*Note Measurement accuracy can be affected by noise and highly inductive or capacitive components distributed on the supply

The post Martindale EZ2500 Non Trip Earth Loop Tester appeared first on Obiat Electronics.

]]> Martindale CMi210 AC/DC TRMS Insulation Clamp Meter https://obiat.com.au/product/martindale-cmi210-ac-dc-trms-insulation-clamp-meter/ Mon, 26 Aug 2019 09:14:41 +0000 https://obiat.com.au/?post_type=product&p=40964

Insulation Testing Clamp Meter !

The Martindale CMi210 is a unique insulation clamp meter for the installation, testing and maintenance of domestic and industrial installations.

This high specification clamp meter can perform insulation tests to 6G Ohms with 5 test voltages from 50V to 1000V.

    Martindale Mi210 Datasheet

    Martindale Mi210 User Manual

The post Martindale CMi210 AC/DC TRMS Insulation Clamp Meter appeared first on Obiat Electronics.

]]> The Martindale CMi210 AC/DC TRMS Insulation Clamp Meter provides True RMS measurement of AC current to 1500A and AC voltage to 750V and Insulation testing to 1000V.

It will also measure DC current to 2000A and DC voltage to 1000V.

Martindale CMi210 Features:

  • Insulation resistance test from 50V to 1000V up to 6GΩ
  • Insulation resistance test to 6GΩ
  • True RMS AC current 1500A
  • DC current to 2000A
  • True RMS voltage to 750V
  • DC voltage to 1000V
  • Continuity with audible indication
  • Duty cycle, resistance, capacitance , frequency, temperature
  • Tests DC voltage to 1000V
  • Test AC voltage to 750V
  • Resistance testing with range up to 60MΩ
  • Capacitance measurements to 6mF
  • Frequency testing to 10MHz
  • Duty cycle calculations
  • Temperature measurements using type K thermocouple
  • Insulation testing with selectable testing voltage of 50V, 100V, 250V, 500V and 1000V

The CMi210 has all the same test functions you would expect to find on a high specification multimeter with the added benefit of temperature measurement.

Martindale CMi210 Specifications

Current AC True RMS 0.1A to 1500A (2 ranges)
Accuracy 2.5% rdg + 10 dgt (≤ 600A) 60Hz
Current DC 0.1A to 2000A (2 ranges)
Accuracy 2.0% + 5 dgt (≤600A)
Voltage AC True RMS 0.001V to 750V, autoranging
Accuracy 1.5% rdg + 8 dgt
Voltage DC 0.001V to 1000V autoranging (5 ranges)
Accuracy 0.5% rdg + 2 dgt
Insulation resistance 300kΩ-6GΩ depending on voltage test
Accuracy 250-1000V 1.5% +5
Capacitance 0.001µF to 6.6mF (4 ranges)
Frequency 0.01Hz to 10MHz (7 ranges)
Resistance ranges 600Ω, 6kΩ, 60kΩ, 600kΩ, 6MΩ, 60MΩ
Resolution 0.1Ω on 600Ω
Accuracy 1.0% rdg + 5 dgt on 600Ω to 600kΩ
Temperature -50°C to 1300°C (-58°F to 2372°F) K-type probes
Continuity buzz at <40Ω
Maximum conductor 55mm diameter or 70mm x 18mm bus bar
Features Diode test, duty cycle
Dimensions 326 x 108 x 53mm
Weight 720g approx. incl batteries
Includes Batteries, case, TL45 test leads, type K thermocouple and manual

The post Martindale CMi210 AC/DC TRMS Insulation Clamp Meter appeared first on Obiat Electronics.

]]> Martindale CM95 AC TRMS High Resolution Flex Meter https://obiat.com.au/product/martindale-cm95-ac-trms-high-resolution-flex-meter/ Thu, 22 Aug 2019 08:11:18 +0000 https://obiat.com.au/?post_type=product&p=40508

The Martindale CM95 Features:

  • Flexible 5.5mm diameter sensor
  • Conductors up to 85mm diameter
  • 3 ranges from 4.000A to 400.0A AC
  • 1mA resolution
  • True RMS
  • Configurable auto power off
  • Low battery indicator
  • Backlit display

The post Martindale CM95 AC TRMS High Resolution Flex Meter appeared first on Obiat Electronics.

]]> The Martindale CM95 AC TRMS High Resolution Flex Meter is fitted with a highly flexible current sensor that is just 5.5mm in diameter. It is ideal for measurements on difficult sizes and shapes of conductors in hard to reach areas where conventional clamps won’t go.

The CM95 with it’s TRMS capability ensures accurate and reliable AC current measurement for distorted waveforms caused by today’s power electronics and non-linear loads.

Measurements are accurate and reliable with 3 ranges up to 400A AC and resolution of 1mA in the 4A range. The light weight flexible sensor head will accommodate conductors up to 85mm in diameter and can be threaded through very small apertures. Unlike conventional current transformers there is no maximum overload limitation.

The CM95’s separate display module is fitted with a 1.8m lead giving even more freedom when working in areas with restricted access and is backlit for viewing in low light conditions. The Hold function can be used for saving displayed values and for longer term monitoring, the auto power off function can be easily disabled and Min/Max values recorded.

The CM95 is  CATIV 600V safety rated making the flex meter ideal for utility and industrial current measurement applications.

The CM95 is supplied with alkaline batteries and manual. All Martindale clamp meters come with a 2 year warranty.

Martindale CM95 Specifications:

AC current 4.000A/40.00A/400.0A
Accuracy 3.0% of rdg ± 5 dgt (45Hz to 500Hz)
Sensor length 254mmSensor diameter: 5.5mm
Max diameter conductor 85mm
Cable length (to display module) 1.8m
Sampling rate 2/sec
Operating environment 0°C to 50°C <80% RH, non condensingStorage temperature: -10°C to 60°C, 70% RH
Complies with BS EN 61010-1, BS EN 61010-2-032, CAT IV 600V, Class II, Double Insulation, EMC BS EN 61326-1
Features Low battery indication, Auto power off/disable
Supply 2 x 1.5 V AAA batteries (IEC LR03, NEDA 24A)
Battery life 120 hours typical (alkaline)
Weight 196g approx. incl batteries
Dimensions 120 x 70 x 26 mm
Includes 2 x 1.5V AAA alkaline batteries and manual

The post Martindale CM95 AC TRMS High Resolution Flex Meter appeared first on Obiat Electronics.

]]>