• MODEL LS-103 AIR/GAS PROBE Specially designed to measure air or gases in heating and cooling units, ovens and engine exhausts. Perforated shield permits fasts response while providing exceptional element protection. Maximum temperature: 800°C Dimensions: Wire: 60″; Handle: 5″; Probe: 6-3/4″

• MODEL LS-104 RIGHT ANGLE SURFACE PROBE Unique right angle design allows temperature of hard to reach areas to be taken. Great for monitoring temperature inside pipes, also flat surfaces, without keeping hands over heated area. Maximum temperature: 400°C Dimensions: Wire: 60″; Handle: 5″; Probe: 7″

• MODEL LS-107 GENERAL PURPOSE PROBE Used to measure both air or liquids, but is best recommended for immersion applications: Excellent for checking temperature of oils, water and non-corrosive fluids. Maximum temperature: 700°C Dimensions: Wire: 60″; Handle: 5″; Probe: 6″

• MODEL LS-109 SURFACE PROBE Ribbon-style surface probe. Maximum temperature: 400°C. Dimensions: Wire: 60″; Handle: 5″; Probe: 6-1/4″

• MODEL LS-134A NEEDLE TIP PROBE Medium gauge hypodermic needle tip, used to measure softer food stuffs, rubbers and solids. Ideal for use in industrial, laboratory and chemical environments. Maximum temperature: 800°C Dimensions: Wire: 60″; Handle: 5″; Probe: 6″

• MODEL LS-139 SURFACE PROBE Spring loaded probe is ideal for high temperature surface measuring requirements. Extremely fast response time. Not recommended for use as an immersion probe. Maximum temperature: 500°C Dimensions: Wire: 60″; Handle: 5″; Probe: 7″

• MODETP-0L 1 TYPE K THERMOCOUPLE WIRE PROBE • MODEL LS-181 & LS-182 THERMOCOUPLE CONNECTOR Type K connector uses Chromel-Alumel alloy in a yellow shell; glass filled nylon; rated to 425°F

The post Reed TP-01 Type-K Thermocouple Wire Probe appeared first on Obiat Electronics.

• MODEL LS-103 AIR/GAS PROBE Specially designed to measure air or gases in heating and cooling units, ovens and engine exhausts. Perforated shield permits fasts response while providing exceptional element protection. Maximum temperature: 800°C Dimensions: Wire: 60″; Handle: 5″; Probe: 6-3/4″

• MODEL LS-104 RIGHT ANGLE SURFACE PROBE Unique right angle design allows temperature of hard to reach areas to be taken. Great for monitoring temperature inside pipes, also flat surfaces, without keeping hands over heated area. Maximum temperature: 400°C Dimensions: Wire: 60″; Handle: 5″; Probe: 7″

• MODEL LS-107 GENERAL PURPOSE PROBE Used to measure both air or liquids, but is best recommended for immersion applications: Excellent for checking temperature of oils, water and non-corrosive fluids. Maximum temperature: 700°C Dimensions: Wire: 60″; Handle: 5″; Probe: 6″

• MODEL LS-109 SURFACE PROBE Ribbon-style surface probe. Maximum temperature: 400°C. Dimensions: Wire: 60″; Handle: 5″; Probe: 6-1/4″

• MODEL LS-134A NEEDLE TIP PROBE Medium gauge hypodermic needle tip, used to measure softer food stuffs, rubbers and solids. Ideal for use in industrial, laboratory and chemical environments. Maximum temperature: 800°C Dimensions: Wire: 60″; Handle: 5″; Probe: 6″

• MODEL LS-139 SURFACE PROBE Spring loaded probe is ideal for high temperature surface measuring requirements. Extremely fast response time. Not recommended for use as an immersion probe. Maximum temperature: 500°C Dimensions: Wire: 60″; Handle: 5″; Probe: 7″

• MODETP-0L 1 TYPE K THERMOCOUPLE WIRE PROBE • MODEL LS-181 & LS-182 THERMOCOUPLE CONNECTOR Type K connector uses Chromel-Alumel alloy in a yellow shell; glass filled nylon; rated to 425°F

The post Reed LS-104 Right Angle Thermocouple Surface Probe appeared first on Obiat Electronics.

• MODEL LS-103 AIR/GAS PROBE Specially designed to measure air or gases in heating and cooling units, ovens and engine exhausts. Perforated shield permits fasts response while providing exceptional element protection. Maximum temperature: 800°C Dimensions: Wire: 60″; Handle: 5″; Probe: 6-3/4″

• MODEL LS-104 RIGHT ANGLE SURFACE PROBE Unique right angle design allows temperature of hard to reach areas to be taken. Great for monitoring temperature inside pipes, also flat surfaces, without keeping hands over heated area. Maximum temperature: 400°C Dimensions: Wire: 60″; Handle: 5″; Probe: 7″

• MODEL LS-107 GENERAL PURPOSE PROBE Used to measure both air or liquids, but is best recommended for immersion applications: Excellent for checking temperature of oils, water and non-corrosive fluids. Maximum temperature: 700°C Dimensions: Wire: 60″; Handle: 5″; Probe: 6″

• MODEL LS-109 SURFACE PROBE Ribbon-style surface probe. Maximum temperature: 400°C. Dimensions: Wire: 60″; Handle: 5″; Probe: 6-1/4″

• MODEL LS-134A NEEDLE TIP PROBE Medium gauge hypodermic needle tip, used to measure softer food stuffs, rubbers and solids. Ideal for use in industrial, laboratory and chemical environments. Maximum temperature: 800°C Dimensions: Wire: 60″; Handle: 5″; Probe: 6″

• MODEL LS-139 SURFACE PROBE Spring loaded probe is ideal for high temperature surface measuring requirements. Extremely fast response time. Not recommended for use as an immersion probe. Maximum temperature: 500°C Dimensions: Wire: 60″; Handle: 5″; Probe: 7″

• MODETP-0L 1 TYPE K THERMOCOUPLE WIRE PROBE • MODEL LS-181 & LS-182 THERMOCOUPLE CONNECTOR Type K connector uses Chromel-Alumel alloy in a yellow shell; glass filled nylon; rated to 425°F

The post Reed LS-109 Thermocouple Surface Probe appeared first on Obiat Electronics.

The Reed LS-134A Thermocouple Needle Tip Probe is one of many probes available from Reed

Other Probes

• MODEL LS-103 AIR/GAS PROBE Specially designed to measure air or gases in heating and cooling units, ovens and engine exhausts. Perforated shield permits fasts response while providing exceptional element protection. Maximum temperature: 800°C Dimensions: Wire: 60″; Handle: 5″; Probe: 6-3/4″

• MODEL LS-104 RIGHT ANGLE SURFACE PROBE Unique right angle design allows temperature of hard to reach areas to be taken. Great for monitoring temperature inside pipes, also flat surfaces, without keeping hands over heated area. Maximum temperature: 400°C Dimensions: Wire: 60″; Handle: 5″; Probe: 7″

• MODEL LS-107 GENERAL PURPOSE PROBE Used to measure both air or liquids, but is best recommended for immersion applications: Excellent for checking temperature of oils, water and non-corrosive fluids. Maximum temperature: 700°C Dimensions: Wire: 60″; Handle: 5″; Probe: 6″

• MODEL LS-109 SURFACE PROBE Ribbon-style surface probe. Maximum temperature: 400°C. Dimensions: Wire: 60″; Handle: 5″; Probe: 6-1/4″

• MODEL LS-134A NEEDLE TIP PROBE Medium gauge hypodermic needle tip, used to measure softer food stuffs, rubbers and solids. Ideal for use in industrial, laboratory and chemical environments. Maximum temperature: 800°C Dimensions: Wire: 60″; Handle: 5″; Probe: 6″

• MODEL LS-139 SURFACE PROBE Spring loaded probe is ideal for high temperature surface measuring requirements. Extremely fast response time. Not recommended for use as an immersion probe. Maximum temperature: 500°C Dimensions: Wire: 60″; Handle: 5″; Probe: 7″

• MODETP-0L 1 TYPE K THERMOCOUPLE WIRE PROBE • MODEL LS-181 & LS-182 THERMOCOUPLE CONNECTOR Type K connector uses Chromel-Alumel alloy in a yellow shell; glass filled nylon; rated to 425°F

About REED

Since 2004, REED Instruments has been providing high quality portable precision test and measurement instruments. We offer over 150 instruments that are used every day by industrial maintenance teams, quality control departments, HVAC/R contractors, electricians and health & safety professionals among others.

The post Reed LS-134A Thermocouple Needle Tip Probe appeared first on Obiat Electronics.

• MODEL LS-103 AIR/GAS PROBE Specially designed to measure air or gases in heating and cooling units, ovens and engine exhausts. Perforated shield permits fasts response while providing exceptional element protection. Maximum temperature: 800°C Dimensions: Wire: 60″; Handle: 5″; Probe: 6-3/4″

• MODEL LS-104 RIGHT ANGLE SURFACE PROBE Unique right angle design allows temperature of hard to reach areas to be taken. Great for monitoring temperature inside pipes, also flat surfaces, without keeping hands over heated area. Maximum temperature: 400°C Dimensions: Wire: 60″; Handle: 5″; Probe: 7″

• MODEL LS-107 GENERAL PURPOSE PROBE Used to measure both air or liquids, but is best recommended for immersion applications: Excellent for checking temperature of oils, water and non-corrosive fluids. Maximum temperature: 700°C Dimensions: Wire: 60″; Handle: 5″; Probe: 6″

• MODEL LS-109 SURFACE PROBE Ribbon-style surface probe. Maximum temperature: 400°C. Dimensions: Wire: 60″; Handle: 5″; Probe: 6-1/4″

• MODEL LS-134A NEEDLE TIP PROBE Medium gauge hypodermic needle tip, used to measure softer food stuffs, rubbers and solids. Ideal for use in industrial, laboratory and chemical environments. Maximum temperature: 800°C Dimensions: Wire: 60″; Handle: 5″; Probe: 6″

• MODEL LS-139 SURFACE PROBE Spring loaded probe is ideal for high temperature surface measuring requirements. Extremely fast response time. Not recommended for use as an immersion probe. Maximum temperature: 500°C Dimensions: Wire: 60″; Handle: 5″; Probe: 7″

• MODETP-0L 1 TYPE K THERMOCOUPLE WIRE PROBE • MODEL LS-181 & LS-182 THERMOCOUPLE CONNECTOR Type K connector uses Chromel-Alumel alloy in a yellow shell; glass filled nylon; rated to 425°F

The post Reed LS-139 Thermocouple Surface Probe appeared first on Obiat Electronics.

Other Reed Probes

• MODEL LS-103 AIR/GAS PROBE Specially designed to measure air or gases in heating and cooling units, ovens and engine exhausts. Perforated shield permits fasts response while providing exceptional element protection. Maximum temperature: 800°C Dimensions: Wire: 60″; Handle: 5″; Probe: 6-3/4″

• MODEL LS-104 RIGHT ANGLE SURFACE PROBE Unique right angle design allows temperature of hard to reach areas to be taken. Great for monitoring temperature inside pipes, also flat surfaces, without keeping hands over heated area. Maximum temperature: 400°C Dimensions: Wire: 60″; Handle: 5″; Probe: 7″

• MODEL LS-107 GENERAL PURPOSE PROBE Used to measure both air or liquids, but is best recommended for immersion applications: Excellent for checking temperature of oils, water and non-corrosive fluids. Maximum temperature: 700°C Dimensions: Wire: 60″; Handle: 5″; Probe: 6″

• MODEL LS-109 SURFACE PROBE Ribbon-style surface probe. Maximum temperature: 400°C. Dimensions: Wire: 60″; Handle: 5″; Probe: 6-1/4″

• MODEL LS-134A NEEDLE TIP PROBE Medium gauge hypodermic needle tip, used to measure softer food stuffs, rubbers and solids. Ideal for use in industrial, laboratory and chemical environments. Maximum temperature: 800°C Dimensions: Wire: 60″; Handle: 5″; Probe: 6″

• MODEL LS-139 SURFACE PROBE Spring loaded probe is ideal for high temperature surface measuring requirements. Extremely fast response time. Not recommended for use as an immersion probe. Maximum temperature: 500°C Dimensions: Wire: 60″; Handle: 5″; Probe: 7″

• MODETP-0L 1 TYPE K THERMOCOUPLE WIRE PROBE • MODEL LS-181 & LS-182 THERMOCOUPLE CONNECTOR Type K connector uses Chromel-Alumel alloy in a yellow shell; glass filled nylon; rated to 425°F

About REED

Since 2004, REED Instruments has been providing high quality portable precision test and measurement instruments. We offer over 150 instruments that are used every day by industrial maintenance teams, quality control departments, HVAC/R contractors, electricians and health & safety professionals among others.

The post Reed LS-107 Thermocouple Probe appeared first on Obiat Electronics.

• MODEL LS-103 AIR/GAS PROBE Specially designed to measure air or gases in heating and cooling units, ovens and engine exhausts. Perforated shield permits fasts response while providing exceptional element protection. Maximum temperature: 800°C Dimensions: Wire: 60″; Handle: 5″; Probe: 6-3/4″

• MODEL LS-104 RIGHT ANGLE SURFACE PROBE Unique right angle design allows temperature of hard to reach areas to be taken. Great for monitoring temperature inside pipes, also flat surfaces, without keeping hands over heated area. Maximum temperature: 400°C Dimensions: Wire: 60″; Handle: 5″; Probe: 7″

• MODEL LS-107 GENERAL PURPOSE PROBE Used to measure both air or liquids, but is best recommended for immersion applications: Excellent for checking temperature of oils, water and non-corrosive fluids. Maximum temperature: 700°C Dimensions: Wire: 60″; Handle: 5″; Probe: 6″

• MODEL LS-109 SURFACE PROBE Ribbon-style surface probe. Maximum temperature: 400°C. Dimensions: Wire: 60″; Handle: 5″; Probe: 6-1/4″

• MODEL LS-134A NEEDLE TIP PROBE Medium gauge hypodermic needle tip, used to measure softer food stuffs, rubbers and solids. Ideal for use in industrial, laboratory and chemical environments. Maximum temperature: 800°C Dimensions: Wire: 60″; Handle: 5″; Probe: 6″

• MODEL LS-139 SURFACE PROBE Spring loaded probe is ideal for high temperature surface measuring requirements. Extremely fast response time. Not recommended for use as an immersion probe. Maximum temperature: 500°C Dimensions: Wire: 60″; Handle: 5″; Probe: 7″

• MODETP-0L 1 TYPE K THERMOCOUPLE WIRE PROBE • MODEL LS-181 & LS-182 THERMOCOUPLE CONNECTOR Type K connector uses Chromel-Alumel alloy in a yellow shell; glass filled nylon; rated to 425°F

The post REED LS-103 Air Temperature Probe (Type K) appeared first on Obiat Electronics.

Data-Hold Operation
You can hold the present reading on the display by pressing the “HOLD” button. When the hold data is no longer needed, release the data-hold operation by pressing  the Reed C-370’s “HOLD” button again.

Relative Temperature
Reed C-370 will memorize the present reading and calculate the difference between the new reading and the memorized value. The result will be shown on the display. Press the “REL” button again to exit the relative operation.

Maximum/Minimum/Average Operations
With “MAX/MIN/AVG” mode the maximum value, minimum value and average value of the measurements will show on the display simultaneously. To set the thermometer into this mod, press the “AVG MAX MIN” button. The average value is calculated using the last 8 readings from the memory, it will update with every new reading.

Auto Power Off
By default, the meter is in auto power off mode. The meter will power itself off after 30 minutes without operation. To disable the auto power off, press and hold the “HOLD” button and turn the meter on. There will be two successive beeps to indicate that the auto power off has been disabled.

REED C-370 Specifications

• Temperature Range     -148 to 572°F (-100 to 300°C)
• Resolution     0.1°F (0.1°C)
• Accuracy     ±0.1% reading +0.8°F (+0.4°C)
• Temperature Coefficient     <18°C & >28°C: 0.01% reading +0.03°C
• Power Supply     3 x 1.5V AAA alkaline batteries
• Battery Life     Approx. 100 hours
• Dimensions     150 x 66 x 31mm
• Weight     175g

The post Reed C-370 RTD Thermometer appeared first on Obiat Electronics.

How to start Type K Measurement
Reed SD-947 is a 4 Channel Thermometer Datalogger which has Type K Temperature sensor by default. The display will show “K” icon. Insert the optional Type K probes into the T1, T2, T3, T4 input sockets. The screen will show the 4 channels (T1, T2, T3, T4) and their temperature values. If an input socket is empty, the screen will display “- – – – -”

Type J/T/E/R/S Measurement
You can change the temperature sensor by pressing the “Type” Button. The following icons will show on the display: “J/T/E/R/S”. Insert the optional Probes into the T1, T2, T3, T4 input sockets. The screen will show the 4 channels (T1, T2, T3, T4) and their temperature values. If an input socket is empty, the screen will display “- – – – -”.

Pt 100 ohm Measurement
Using again the “Type” Button until the screen displays “Pt” you are able to change the Temperature Sensor. Insert the optional Pt 100 ohm Probes into the PT1 and PT2 input sockets. The screen will show the temperature values.

T1-T2 Measurement
With this Reed SD-947 4 Channel Thermometer Datalogger you are able to made T1-T2 measurements. Start using this by inserting the two probes into the meter, either a Thermocouple Probe in the T1 & T2 sockets, or a Pt 100ohm Probe in the PT1 & PT2 sockets. Continue by pressing the “T1-T2” button and the display will show the difference value between T1, T2 (or PT1, PT2) on the bottom right of the screen.

Data Hold
To freeze on the screen the measured value, while taking a measurement, press the Hold Button once. Now the display will show the “HOLD” symbol and the measured value. Press the Hold Button once again will release the data hold function.

Data Record (Max., Min. reading)
Recording the maximum and minimum readings is also possible with Reed SD-947. Press the REC Button once to start the Data Record function and a “REC” symbol will appear on the display. With the “REC” symbol on the display:

• Press the REC Button once, and a ”REC. MAX.” symbol along with the maximum value will appear on the display. To delete the maximum value, press the Hold Button once and the display will show a “REC.” symbol only and execute the memory function continuously.
• Press the REC Button again, and a “REC. MIN.” symbol along with the minimum value will appear on the display. To delete the minimum value, press the Hold Button once, and the display will show a “REC.” symbol only and execute the memory function continuously.

The post Reed SD-947 Thermocouple Thermometer/Logger appeared first on Obiat Electronics.

How to use Reed Digital Type K Thermometer (-50/1300C) (ST-610B)

How to select the Temperature Scale
Reed ST-610B will turn on with the temperature scales’s last settings. To change the scale, simply press the °C, °F or K button.

Selecting the Display Resolution
For this digital thermometer two choices of resolution are available: High resolution (0.1°C or 0.1°F) and Low resolution (1°C or 1°F)

Tc (Temperature Compensator) Checking Mode
Press and hold the Tc button to enter the “Temperature Compensator-Checking” mode. The thermometer will display the inside temperature.

Hold and Max Mode
To activate “Data Hold” mode, press the HOLD button since the “HOLD” indicator will be displayed. Now the Reed ST-610B thermometer will “freeze” the present readings and stops all further measurements. Pressing the HOLD button again cancels “HOLD” mode, causing the thermometer to resume taking measurements.
To use the “Max Mode” just press the MAX button then the instrument will record and update the maximum values. During this measurements the “MAX” indicator appears on the display. Press the MAX button again to exit the “MAX” recording mode. In the “MAX” mode, press the HOLD button to stop the recording, press HOLD again to resume recording.

Optional Accessories:
Model LS-109 Surface Probe: Ribbon-style surface probe
Model LS-139 Surface Probe: Spring loaded probe is ideal .
for all high temperature applications
Model LS-104 Right Angle Surface Probe: Unique right angle .
design allows temperature of hard to reach areas to be taken
Model LS-103 Air/Gas Probe: Perforated shield permits fast .
response while providing element protection
Model LS-134A Needle Tip Probe: Medium gauge hypodermic .
needle tip, used to measure softer foodstuffs, rubber and solids
Model LS-107 General Purpose Probe: Used to measure both air .
and liquids, but is recommended for immersion applications

REED ST-610B Specifications

ELECTRICAL
• Temperature Scale: Celsius (C°), Fahrenheit (°F) or Kelvin (K)
• Measurement Range: -50°C to 1300°C, -58°F to 2000°F, 223K to 2000K
• Resolution: 1°C or 1°F, 0.1°C or 0.1°F,1 K
• Accuracy is specified for operating temperatures.over the range of 18°C to 28°C (64°F to 82°F),
  for 1 year, not including thermocouple error
  ±2°C -50°C to 0°C
  ±4°F -58°F to 32°F
  ±5K 223K to 273K
  ±(0.5% rdg+1°C) 0°C to 1000°C
  ±(0.8% rdg+1°C) 1000°C to 1300°C
  ±(0.5% rdg+2°F) 32°F to 2000°F
  ±(1.0% rdg+2K) 273K to 2000K
• Temperature Coefficient: 0.1 times the applicable accuracy specification per °C from 0°C to 18°C and 28°C to 50°C (32°F to 64°F and 82°F to 122°F)
• Input protection: 60V DC or 24V RMS AC maximum input voltage on any combination of input pins;
• Reading Rate: 2.5 times per second;
• Input Connector: Accepts standard miniature thermocouple connectors (flat blades spaced 7.9mm, center to center)
  ENVIRONMENTAL
• Ambient Operating Range: 0°C to 50°C (32°F to 122°F);
• Storage Temperature: -20°C to 60°C (-4°F to 140°F);
• Relative Humidity: 0% to 80% (0°C to 35°C) (32°F to 95°F).
  0% to 70% (35°C to 50°C) (95°F to 122°F);
  GENERAL
• Display: 3 ½ digit liquid crystal display (LCD) with a maximum reading of 1999;
• Battery: Standard 9V battery (NEDA 1604, IEC 6F22);
• Dimensions: 162mm (H) × 76mm (W) × 38.5mm (D);
• Weight: 210g

The post Reed ST-610B Thermocouple Thermometer and Probe Kit appeared first on Obiat Electronics.