• Dual technology provides automatic recognition for ferrous and nonferrous metal substrates
• Magnetic induction for ferrous metal substrates
• Eddy current measurement for non-ferrous metal substrates
• One or two point calibration
• User-settable high/low alarms
• Easy Zero calibration
• Min, Max, and Average functions
• Memory stores up to 400 readings
• Easily delete single or group readings
• Auto-Power-off function Backlight
• Measurement Range: 0 to 1250 μm (0 to 49 mils)

How to use Reed ST-156 Coating Thickness Gauge

Continuous Measuring Mode
In Continuous Mode, the probe is not lifted off the surface being measured. Readings are not accompanied by a beep. All readings taken in this mode are automatically entered into the statistics program as long as sufficient memory is available.

Single Measuring Mode
In Single Mode, the probe is lifted off the surface being measured and moved. Readings are accompanied by a beep. All readings taken in this mode are automatically entered into the statistics program as long as sufficient memory is available.

Probe Operating
The probe can work in three modes:
AUTO: The probe can automatically select the working mode. When placed on steel (magnetic substrates), it will work in magnetic induction principle. When placed on no-ferrous metals, it will work in eddy current principle.
Fe: The probe works in magnetic induction principle.
No-Fe: The probe works in eddy current principle.

Statistic View
While in the Menu, choose “Statistic View” to toggle between Average, Maximum, Minimum and Standard Deviation functions. Press the Red Bar Button to select the current Statistic View and to return to measurement mode. A corresponding symbol of the Statistic View will be displayed on the lower right of the LCD. At the same time, the statistic number of the measured readings will display on the lower left of the LCD. Via the “Statistic View” in the Menu, you can look through all statistic values for a current group.

Measurement View
In the Menu, choose “Measurement View” to look through all measurement readings for current group.

REED ST-156 Specifications

The post Reed ST-156 Coating Thickness Gauge and Probes appeared first on Obiat Electronics.

REED TM-8811 Features

• Digital display provides exact readings without guessing or errors
• Auto calibration
• Automatic material calibration
• Selectable metric or imperial measuring units
• Broad band receiving sensitivity means the meter can read probes of different frequencies
• Can display sound velocity at the touch of a button
• Automatic power off
• Use the material selection button to accurately measure the thickness of steel, cast iron, aluminum, red copper, zinc, quartz glass, polyethylene, PVC, gray cast iron & nodular cast iron

How to use Reed TM-8811 Ultrasonic Thickness Gauge

With the Reed TM-8811Ultrasonic Gauge turned on, select the correct unit of measure by pressing the mm/inch button. Place the Ultrasonic sensor on the material surface being measured. Select the correct Material selection code and verify the coupling is okay by verifying that the Coupling indicator symbol is on. The reading on the display is the measurement value. The reading will be held until a new measurement is taken or until the unit is turned off.

To select the Sound velocity code, simply continue pressing the Plus or Minus buttons until you see a 4-digit number in the display. The 4-digit number represents the last sound velocity measurement taken. When selecting this velocity, you can measure the thickness of the same material as the last.

Measuring Sound Velocity – Press the “VEL” button and the display will show the last velocity measurement.

REED TM-8811 Specifications

The post Reed TM-8811 Ultrasonic Thickness Gauge and Probe with Velocity appeared first on Obiat Electronics.