The SEW PD-28 high voltage probe is designed to extend the voltage measuring capability of an AC/DC voltmeters to 40,000 volts peak AC or DC Overvoltage Category I. This means the probe can only be used to make measurements on energy limited circuits within equipment. Examples include high voltage within televisions or photo copy machines. DO NOT use this probe to measure high voltages on power distribution systems. The probe stated accuracy is when used with a voltmeter having 10 Megohm input impedance.

The probe is a precision 1000:1 voltage divider that is formed by two matched resistors. The unusually high input impedance offered by these resistors minimizes circuit loading and optimises measurement accuracy. A special plastic body houses the divider and provides the user with isolation and protection from the voltage being measured

• Measures both AC and DC voltages with digital multimeters that have a 10 MΩ input impedance.
• Is typically used to measure high voltages in TV sets, power supplies and instruments in laboratories.
• Intended for low energy applications only.
• Lightweight and rugged. 2 available contact tips: round needle tip for normal use and a special flat spring-type for CRT anode.

SEW PD-28 HIGH VOLTAGE PROBE SPECIFICATIONS:

The post SEW PD-28 HIGH VOLTAGE PROBE 40kVDC-28kVAC appeared first on Obiat Electronics.

The HT Italia Line Splitter separates the Active (Line) from the neutral and ground wires on a standard 240VAC outlet allowing current measurements to be made with a current clamp. Without the Line Splitter, the current clamp measures the load current going in both directions, effectively cancelling the measurement.

The HT Line Splitter has a standard measurement section and a x10 multiplier section for use with higher ranged clamp meters.

The HT Italia HA000951 Line Splitter can also be used to make voltage checks safely with standard multimeter probes.

HT Italia HA000951 Line Splitter Functions:

Conductor splitting without cable stripping!

• Measure Mains voltages safely via shrouded banana sockets
• Leakage current on earth conductor
• Measurement of leakage current under RCD mode (Line-Neutral)
• Line current
• 10X magnified Line current

The post HT Italia HA000951 Line Splitter – Separator appeared first on Obiat Electronics.

• TL726 – Double Molded Silicone Test Leads
• TL740 – Industrial Plunger Style Test Clips
• TL741 – Heavy Duty Plunger Style Hook Clip Set
• TL708 – Large Alligator Clip Set
• TL743 – Slim Reach Test Probe Set
• Type K Bead Probe with Banana Plug
• Conveniently stored in a pouch case

The Extech TL833 is an accessory for the following products:

• Extech 38070 Mini Analog Multimeter
• Extech 38073 Mini Analog Multimeter
• Extech DM110 Mini Pocket MultiMeter
• Extech DM220 Mini Pocket Multimeter
• Extech EX210 Mini Digital Multimeter
• Extech EX230 Mini Digital Multimeter
• Extech EX310 Mini Digital Multimeter
• Extech EX320 Mini Digital Multimeter
• Extech EX330 Mini Digital Multimeter
• Extech EX410/EX411 Digital Multimeter
• Extech EX420/EX430 Multimeter
• Extech EX470 Multimeter
• Extech EX503 Multimeter
• Extech EX505 True RMS Multimeter
• Extech EX520 Multimeter
• Extech EX530 Multimeter
• Extech EX540/EX542 Multimeter
• Extech EX570 Industrial Multimeter
• Extech MN15A / MN16A Mini Multimeter
• Extech MN25 MiniTec Digital Multimeter
• Extech MN26T MiniTec Digital Multimeter
• Extech MN35/36 Mini Digital Multimeters
• Extech MN42 Compact Digital Multimeter
• Extech MN47 Compact Digital Multimeter
• Extech 380224 Heavy Duty Indicator/Multimeter (RETIRED)
• Extech 381295A/381395 Dual Channel MultiScope Multimeter (RETIRED)
• Extech EX510 Digital Multimeter (RETIRED)

These high quality Extech TL833 industrial test leads are not only recommended for Extech products as per the above list but are also compatible with most manufactures test and measurement products. These rugged, robust Extech test leads are designed to help you get the most out of your meter. Extech test leads are a very important part of the complete measurement system and extend the capabilities of your digital multimeter or other test and measurement instruments which you may be using or have in your toolbox. Should the Extech TL833 industrial test lead set not be exactly what you require the we suggest the one of the following:

TL805 Double Injected Test Leads

TL900 Fused Test Lead Features

Extech TL726 Double Molded Premium Silicone Test Lead

The post Extech TL833 Industrial Test Lead Set appeared first on Obiat Electronics.

• Intelligent SafeSense™ technology makes it easy for user to know if voltage is present on target area being measured, even with a blown fuse, for increased safety
• Two dual-layered silicone test lead cables (5.3ft/1.6m long) with wear indication construction
• Standard 90° shrouded banana-to-banana plug connectors fit most multimeter input jacks
• Two CAT IV probes have built-in replaceable fuses (1000V, 11A, 20kA breaking capacity)
• CAT IV-600V, CAT III-1000V, 10A with protective safety cap
• Each probe has 2mm probe tip and includes a 4mm brass caged bayonet threaded tip (removable) for connecting accessories

The Extech TL900 is an accessory for the following products:

• Extech 38070 Mini Analog Multimeter
• Extech 38073 Mini Analog Multimeter
• Extech DM110 Mini Pocket MultiMeter
• Extech DM220 Mini Pocket Multimeter
• Extech EX210 Mini Digital Multimeter
• Extech EX230 Mini Digital Multimeter
• Extech EX310 Mini Digital Multimeter
• Extech EX320 Mini Digital Multimeter
• Extech EX330 Mini Digital Multimeter
• Extech EX410/EX411 Digital Multimeter
• Extech EX420/EX430 Multimeter
• Extech EX470 Multimeter
• Extech EX503 Multimeter
• Extech EX505 True RMS Multimeter
• Extech EX520 Multimeter
• Extech EX530 Multimeter
• Extech EX540/EX542 Multimeter
• Extech EX570 Industrial Multimeter
• Extech MN15A / MN16A Mini Multimeter
• Extech MN25 MiniTec Digital Multimeter
• Extech MN26T MiniTec Digital Multimeter
• Extech MN35/36 Mini Digital Multimeters
• Extech MN42 Compact Digital Multimeter
• Extech MN47 Compact Digital Multimeter
• Extech 380224 Heavy Duty Indicator/Multimeter (RETIRED)
• Extech 381295A/381395 Dual Channel MultiScope Multimeter (RETIRED)
• Extech EX510 Digital Multimeter (RETIRED)

These high quality Extech TL900 fused test leads are not only recommended for Extech products as per the above list but are also compatible with most manufactures test and measurement products. These rugged, robust Extech test leads are designed to help you get the most out of your meter. Extech test leads are a very important part of the complete measurement system and extend the capabilities of your digital multimeter or other test and measurement instruments which you may be using or have in your toolbox. Should the Extech TL900 fused test leads not be exactly what you require the we suggest the one of the following:

TL805 Double Injected Test Leads

TL833 Industrial Test Lead Set

Extech TL726 Double Molded Premium Silicone Test Lead

The post EXTECH TL900 SafeSense™ CAT IV Fused Test Leads appeared first on Obiat Electronics.

Features

• Professional grade test leads compatible with most multimeters
• Double coated PVC lead wire with white inner layer to easily identify damaged leads
• CAT IV-600V rating; UL listed
• Heavy duty chromium plated brass tips
• Shrouded, non-twist banana plugs for reduced socket wear
• “Superflex” molded strain reliefs for improved cable flexibility
• “D” shaped finger guards allow easy access to narrowly spaced test points

The Extech TL805 is an accessory for the following products:

• Extech 38070 Mini Analog Multimeter
• Extech 38073 Mini Analog Multimeter
• Extech DM110 Mini Pocket MultiMeter
• Extech DM220 Mini Pocket Multimeter
• Extech EX210 Mini Digital Multimeter
• Extech EX230 Mini Digital Multimeter
• Extech EX310 Mini Digital Multimeter
• Extech EX320 Mini Digital Multimeter
• Extech EX330 Mini Digital Multimeter
• Extech EX410/EX411 Digital Multimeter
• Extech EX420/EX430 Multimeter
• Extech EX470 Multimeter
• Extech EX503 Multimeter
• Extech EX505 True RMS Multimeter
• Extech EX520 Multimeter
• Extech EX530 Multimeter
• Extech EX540/EX542 Multimeter
• Extech EX570 Industrial Multimeter
• Extech MN15A / MN16A Mini Multimeter
• Extech MN25 MiniTec Digital Multimeter
• Extech MN26T MiniTec Digital Multimeter
• Extech MN35/36 Mini Digital Multimeters
• Extech MN42 Compact Digital Multimeter
• Extech MN47 Compact Digital Multimeter
• Extech 380224 Heavy Duty Indicator/Multimeter (RETIRED)
• Extech 381295A/381395 Dual Channel MultiScope Multimeter (RETIRED)
• Extech EX510 Digital Multimeter (RETIRED)

These high quality Extech TL805 Double Injected Test Leads  are not only recommended for Extech products as per the above list but are also compatible with most manufactures test and measurement products. These rugged, robust Extech test leads are designed to help you get the most out of your meter. Extech test leads are a very important part of the complete measurement system and extend the capabilities of your digital multimeter or other test and measurement instruments which you may be using or have in your toolbox. Should the Extech TL805 Double Injected Test Leads are not be exactly what you require the we suggest the one of the following:

TL833 Industrial Lead Set

TL900 Fused Test Lead Features

Extech TL726 Double Molded Premium Silicone Test Lead

The post Extech TL805 Double Injected Test Leads appeared first on Obiat Electronics.

Extech TL 744 Flat Blade Test Probe Set has the following features:

• 1000V, 10A
• 0.7″ (17mm) long x 0.1” (2.5mm) flat tip
• 4.9″ (124mm) overall length
• CAT IV-600V; CAT III-1000

The Extech TL744 is an accessory for the following products:

• Extech 38070 Mini Analog Multimeter
• Extech 38073 Mini Analog Multimeter
• Extech DM110 Mini Pocket MultiMeter
• Extech DM220 Mini Pocket Multimeter
• Extech EX210 Mini Digital Multimeter
• Extech EX230 Mini Digital Multimeter
• Extech EX310 Mini Digital Multimeter
• Extech EX320 Mini Digital Multimeter
• Extech EX330 Mini Digital Multimeter
• Extech EX410/EX411 Digital Multimeter
• Extech EX420/EX430 Multimeter
• Extech EX470 Multimeter
• Extech EX503 Multimeter
• Extech EX505 True RMS Multimeter
• Extech EX520 Multimeter
• Extech EX530 Multimeter
• Extech EX540/EX542 Multimeter
• Extech EX570 Industrial Multimeter
• Extech MN15A / MN16A Mini Multimeter
• Extech MN25 MiniTec Digital Multimeter
• Extech MN26T MiniTec Digital Multimeter
• Extech MN35/36 Mini Digital Multimeters
• Extech MN42 Compact Digital Multimeter
• Extech MN47 Compact Digital Multimeter
• Extech 380224 Heavy Duty Indicator/Multimeter (RETIRED)
• Extech 381295A/381395 Dual Channel MultiScope Multimeter (RETIRED)
• Extech EX510 Digital Multimeter (RETIRED)

These high quality Extech TL 744 Flat Blade Test Probe Set are not only recommended for Extech products as per the above list but are also compatible with most manufactures test and measurement products. These rugged, robust Extech test leads are designed to help you get the most out of your meter. Extech test leads are a very important part of the complete measurement system and extend the capabilities of your digital multimeter or other test and measurement instruments which you may be using or have in your toolbox. Should the Extech TL 744 Flat Blade Test Probe Set set not be exactly what you require the we suggest the one of the following:

TL805 Double Injected Test Leads

TL900 Fused Test Lead Features

Extech TL726 Double Molded Premium Silicone Test Lead

The post EXTECH TL744 Flat Blade Test Probe Set appeared first on Obiat Electronics.

The Extech TL726 double molded (with white inner layer to easily identify damaged leads) silicone test lead set has right angle and straight-end flexible leads with shrouded banana plugs.

These Premium test leads are 1.6m long and have a protective collar and insulated sleeve. The Extech TL726 test leads are rate for 1000V, 10A and have a CAT IV – 600V; CAT III – 1000V safety rating.

The Extech TL726 is an accessory for the following products:

• Extech 38070 Mini Analog Multimeter
• Extech 38073 Mini Analog Multimeter
• Extech DM110 Mini Pocket MultiMeter
• Extech DM220 Mini Pocket Multimeter
• Extech EX210 Mini Digital Multimeter
• Extech EX230 Mini Digital Multimeter
• Extech EX310 Mini Digital Multimeter
• Extech EX320 Mini Digital Multimeter
• Extech EX330 Mini Digital Multimeter
• Extech EX410/EX411 Digital Multimeter
• Extech EX420/EX430 Multimeter
• Extech EX470 Multimeter
• Extech EX503 Multimeter
• Extech EX505 True RMS Multimeter
• Extech EX520 Multimeter
• Extech EX530 Multimeter
• Extech EX540/EX542 Multimeter
• Extech EX570 Industrial Multimeter
• Extech MN15A / MN16A Mini Multimeter
• Extech MN25 MiniTec Digital Multimeter
• Extech MN26T MiniTec Digital Multimeter
• Extech MN35/36 Mini Digital Multimeters
• Extech MN42 Compact Digital Multimeter
• Extech MN47 Compact Digital Multimeter
• Extech 380224 Heavy Duty Indicator/Multimeter (RETIRED)
• Extech 381295A/381395 Dual Channel MultiScope Multimeter (RETIRED)
• Extech EX510 Digital Multimeter (RETIRED)

These high quality Extech TL726 Double Molded Premium Silicone Test Leads are not only recommended for Extech products as per the above list but are also compatible with most manufactures test and measurement products. These rugged, robust Extech test leads are designed to help you get the most out of your meter. Extech test leads are a very important part of the complete measurement system and extend the capabilities of your digital multimeter or other test and measurement instruments which you may be using or have in your toolbox. Should the Extech TL726 Double Molded Premium Silicone Test Lead Set not be exactly what you require the we suggest the one of the following:

TL805 Double Injected Test Leads

TL833 Industrial Test Lead Set

TL900 Fused Test Lead Features

The post EXTECH TL726 Double Molded Premium Silicone Test Lead Set appeared first on Obiat Electronics.

The FLIR TA80 can be use with Flir Meters and Virtually Any Other Test Instruments That Accept Standard Right Angle Shrouded Banana Plugs, Temp.

Range -4 Degrees to 140 Degrees F, Standards UL, Includes (1) Pair of Test Leads (Red and Black) with Removable Protective Caps

The FLIR CAT IV Silicone Test Leads can be used with a variety of FLIR test instruments to increase flexibility and usability of measurement instruments.

Features

• 1000 Volt, 10 Amp test probes. UL certified to CAT IV—1000 V rating
• Gold-plated tips for professional precision
• Double-extruded multi-color silicone leads with wear indication
• High-strength stress relief integrated into the probe
• 41″ lead length with a total length of 46″ including the probe

The FLIR CAT IV Silicone Test Leads can be used with a variety of FLIR test instruments to increase flexibility and usability of measurement instruments.

FLIR CM78 1000A Combination Clamp Meter
FLIR CM82 Power Clamp Meter
FLIR CM83 Power Clamp Meter
FLIR CM85 Power Clamp Meter
FLIR DM92 True RMS Industrial Multimeter
FLIR DM93 True RMS Industrial Multimeter
FLIR IM75 Insulation Tester Multimeter

Includes

FLIR CAT IV Silicone Test Leads TA80
User’s Manual
Warranty Information

The FLIR CAT IV Silicone Test Leads comes with a 2 year warranty.

Includes

• FLIR CAT IV Silicone Test Leads TA80
• User’s Manual

Warranty Information

The FLIR CAT IV Silicone Test Leads comes with a 2 year warranty.

The post FLIR TA80 – Premium CAT IV Silicone Test Leads appeared first on Obiat Electronics.

• The Extech TL831 Master Electrical Test Lead Kit is an industrial grade twelve piece kit.
  • TL726 Double Molded Silicone Test Leads
  • TL747 Electronic Sharp Test Probe Set
  • TL741 Heavy Duty Plunger Style Hook Clip Set
  • TL742 Heavy Duty Plunger Style Pincer Grip Set
  • TL740 Industrial Plunger Style Test Clips
  • TL709 Medium Alligator Clip Set
  • Conveniently stored in a pouch case

The Extech TL831 kit is an accessory for the following products:

• Extech 38070 Mini Analog Multimeter
• Extech 38073 Mini Analog Multimeter
• Extech DM110 Mini Pocket MultiMeter
• Extech DM220 Mini Pocket Multimeter
• Extech EX210 Mini Digital Multimeter
• Extech EX230 Mini Digital Multimeter
• Extech EX310 Mini Digital Multimeter
• Extech EX320 Mini Digital Multimeter
• Extech EX330 Mini Digital Multimeter
• Extech EX410/EX411 Digital Multimeter
• Extech EX420/EX430 Multimeter
• Extech EX470 Multimeter
• Extech EX503 Multimeter
• Extech EX505 True RMS Multimeter
• Extech EX520 Multimeter
• Extech EX530 Multimeter
• Extech EX540/EX542 Multimeter
• Extech EX570 Industrial Multimeter
• Extech MN15A / MN16A Mini Multimeter
• Extech MN25 MiniTec Digital Multimeter
• Extech MN26T MiniTec Digital Multimeter
• Extech MN35/36 Mini Digital Multimeters
• Extech MN42 Compact Digital Multimeter
• Extech MN47 Compact Digital Multimeter
• Extech 380224 Heavy Duty Indicator/Multimeter (RETIRED)
• Extech 381295A/381395 Dual Channel MultiScope Multimeter (RETIRED)
• Extech EX510 Digital Multimeter (RETIRED)

These high quality Extech TL831 test leads are not only recommended for Extech products as per the above list but are also compatible with most manufactures test and measurement products. These rugged, robust Extech test leads are designed to help you get the most out of your meter. Extech test leads are a very important part of the complete measurement system and extend the capabilities of your digital multimeter or other test and measurement instruments which you may be using or have in your toolbox. Should the Extech TL831 test leads not be exactly what you require the we suggest the one of the following:

TL805 Double Injected Test Leads

TL833 Industrial Test Lead Set

Extech TL726 Double Molded Premium Silicone Test Lead

The post EXTECH TL831 Master Electrical Test Lead Kit appeared first on Obiat Electronics.

• MODEL LS-103 AIR/GAS PROBE Specially designed to measure air or gases in heating and cooling units, ovens and engine exhausts. Perforated shield permits fasts response while providing exceptional element protection. Maximum temperature: 800°C Dimensions: Wire: 60″; Handle: 5″; Probe: 6-3/4″

• MODEL LS-104 RIGHT ANGLE SURFACE PROBE Unique right angle design allows temperature of hard to reach areas to be taken. Great for monitoring temperature inside pipes, also flat surfaces, without keeping hands over heated area. Maximum temperature: 400°C Dimensions: Wire: 60″; Handle: 5″; Probe: 7″

• MODEL LS-107 GENERAL PURPOSE PROBE Used to measure both air or liquids, but is best recommended for immersion applications: Excellent for checking temperature of oils, water and non-corrosive fluids. Maximum temperature: 700°C Dimensions: Wire: 60″; Handle: 5″; Probe: 6″

• MODEL LS-109 SURFACE PROBE Ribbon-style surface probe. Maximum temperature: 400°C. Dimensions: Wire: 60″; Handle: 5″; Probe: 6-1/4″

• MODEL LS-134A NEEDLE TIP PROBE Medium gauge hypodermic needle tip, used to measure softer food stuffs, rubbers and solids. Ideal for use in industrial, laboratory and chemical environments. Maximum temperature: 800°C Dimensions: Wire: 60″; Handle: 5″; Probe: 6″

• MODEL LS-139 SURFACE PROBE Spring loaded probe is ideal for high temperature surface measuring requirements. Extremely fast response time. Not recommended for use as an immersion probe. Maximum temperature: 500°C Dimensions: Wire: 60″; Handle: 5″; Probe: 7″

• MODETP-0L 1 TYPE K THERMOCOUPLE WIRE PROBE • MODEL LS-181 & LS-182 THERMOCOUPLE CONNECTOR Type K connector uses Chromel-Alumel alloy in a yellow shell; glass filled nylon; rated to 425°F

The post Reed LS-104 Right Angle Thermocouple Surface Probe appeared first on Obiat Electronics.