Cable Testers Archives - Obiat Electronics https://obiat.com.au/product-tag/cable-testers/ keeping your industry up and running Mon, 03 Oct 2022 00:41:29 +0000 en-AU hourly 1 https://wordpress.org/?v=6.9 https://obiat.com.au/wp-content/uploads/2016/05/obiat_logo_2-100x100.jpg Cable Testers Archives - Obiat Electronics https://obiat.com.au/product-tag/cable-testers/ 32 32 SEW 5500CB Cable Locator https://obiat.com.au/product/sew-5500cb-cable-locator/ Fri, 18 May 2018 02:46:13 +0000 https://obiat.com.au/?post_type=product&p=8800

The SEW 5500CB is a professional general purpose cable locator. It is ideal for tracing cables in walls and underground and for locating fuses & breakers on their circuits.

The SEW 5500CB can also locate interruptions and short-circuits in cables and electrical floor heating systems. It can also be used for tracing metal water and heating pipes.

The unit is supplied as a complete kit comprising of a transmitter and receiver in a  carry case. The Transmitter & the Receiver both also have an inbuilt torch for working in poorly lit locations.

SEW 5500CB Features:

  • Can be used on cables without voltage or voltage
  • Set includes transmitter and receiver
  • Set allows locating fuses, short circuits and cord interruptions, searching for metal installations in the wall and ground, ...
  • Digital encoded transmitter signal
  • Signal detection; Automatic mode or manual mode (9 levels of choice)
  • Receiver with LCD display and level display of received signal, transmitted transmitter code and external voltage
  • Transmitter with the option of setting the triplets of the transmitted signal
  • The choice of the signal code on the transmitter.
  • Measurement of the AC / DC voltage on the receiver from 12 to 300 V
  • Built-in light in the transmitter and receiver for illumination of the workplace
  • Automatic switch off the instrument

    SEW-5500CB-Datasheet

The post SEW 5500CB Cable Locator appeared first on Obiat Electronics.

]]> The SEW 5500CB is a very versatile general purpose cable locator that is ideal for tracing cables in walls and underground and for locating fuses & breakers at the switchboard for these cables.

SEW 5500CB Transmitter Features:
● The SEW 5500CB transmitter is the ideal tool for locating and identifying cables and individual conductors.
● Designed for locating unenergized cables and powered cables.
● Voltage measurement for cables :
ACV 12V~300V
DCV 12V~300V
● Signal Transmission
●Transmission Power Level Selection (includes 1, 2, 3)
● Transmission Signal Code Selection (includes F, E, H, d, L, C, O, A)
● Flashlight & Back Light function.
● The Silent Mode (Disable Button Beep).
● The Level Bar Display on the LCD Screen (the transmission power level indication).
● The Action Wave Display on the LCD Screen (when the signal is transmitted).
● Auto power off function.

SEW 5500CB Receiver Features:
● The SEW 5500CB receiver is designed to identify and trace wires or cables.
● Designed for locating unenergized cables and powered cables.
● Signal Detection (includes Level, Code, Value)
● Automatic Mode
● Manual Mode (There are 9 levels to select).
● UAC Mode (AC Power Line Detection)
● Flashlight & Back Light function.
● The Silent Mode (Disable Button Beep & Frequency Tone)
● The Danger Symbol is to indicate the AC voltage on the Line.
● The Level Bar Display on the LCD Screen for the signal value & the UAC power value.
● Auto power off function.

SEW5500CB SPECIFICATIONS:

 Transmitter
  Output signal frequency  125kHz
  Voltage measurement range  12~300V AC / DC
  Accuracy ±(2%rdg+2dgt)
  Display  LCD shows function and bargraph
  Power source  1.5V (AAA) battery × 6
  Fuse  690V/0.5A (6.3 × 32mm)
  Operating temperature  0°C~40°C
  & humidity 80% R.H. Max.
  Storage temperature  -10°C~50°C
  & humidity 80% R.H. Max.
  Dimensions  188(L)×90(W)×47(D)mm
  Weight  Approx. 389g
  (battery Included)

 Receiver
 Detection depth  < 50cm
 Display  LCD shows function and bargraph
 Power source  1.5V (AAA) battery × 6
 Operating temperature  0°C~40°C
 & humidity 80% R.H. Max.
 Storage temperature  -10°C~50°C
 & humidity 80% R.H. Max.
 Dimensions  247(L)×78(W)×45(D)mm
 Weight (battery included)  Approx. 324g

 

The post SEW 5500CB Cable Locator appeared first on Obiat Electronics.

]]> KEP VLF60 HiPot Cable Tester https://obiat.com.au/product/kep-vlf60-hipot-cable-tester/ Mon, 04 Sep 2017 00:38:55 +0000 http://obiat.com.au/?post_type=product&p=4106 KEP-Logo

The KEP VLF-60 Cable Insulation Tester is a very low frequency high voltage test set that ensures efficient testing and fault location on medium voltage cables.

  • Efficient non-destructive cable testing
  • Portable, perfect for field testing
  • Test capacity of 10 µf
  • Fully automatic testing cycle
  • Automatic discharging
  • Easy maintenance due to solid-type insulation system
  • Breakdown voltage measurement and load recognition
  • Easy-to-use software
  • Does not need an external PC
  • LCD touch screen
  • 2 Year Warranty

KEP Distributor

PDF Logo    KEP-VLF-60-Datasheet

PDF Logo    KEP-Hipot-Cable-Testing-Application-Note

 

The post KEP VLF60 HiPot Cable Tester appeared first on Obiat Electronics.

]]> Introduction to the KEP VLF-60 HiPot Cable Tester:

One of the most popular cable testing techniques nowadays is very low frequency testing, which, on the one hand, provides accurate testing results, and, on the other hand, does not damage good cable insulation.
Very low frequency (VLF) testing involves applying frequency in the range of 0.01 to 0.1 Hz to the cable under test, which is non-destructive to insulation of proper quality, but is enough to detect cable faults. Compared to DC cable testing, which can be damaging to good insulation, VLF testing does not have such a detrimental effect on the cable being tested and does not generate any travelling waves.

Very low frequency (VLF) testing involves applying frequency in the range of 0.01 to 0.1 Hz to the cable under test, which is non-destructive to insulation of proper quality, but is enough to detect cable faults. Compared to DC cable testing, which can be damaging to good insulation, VLF testing does not have such a detrimental effect on the cable being tested.

KEP VLF-60 HiPot Cable Tester –  MAIN FEATURES:

  • Efficient non-destructive cable withstand testing
  • Portable, perfect for field testing
  • Test capacity of 10 µf
  • Fully automatic testing cycle
  • Automatic discharging
  • Easy maintenance due to solid-type insulation system
  • Breakdown voltage measurement and load recognition
  • Easy-to-use software
  • Does not need an external PC
  • LCD touchscreen

KEP VLF-60 HiPot Cable Tester – Technical Specifications:

Parameter Value
Output Voltage:
– Sinusoidal 0 – 62 kV peak / 0 – 44 kV RMS
– DC ± 0 – 60 kV
– Squarewave 0 – 60 kV
– Accuracy ± 1 %
– Resolution 0.1 kV
Output Curent:
– Sinusoidal (RMS) 26 mA
– DC / Squarewave 40 mA
– Accuracy ± 1 %
– Resolution 1 μA
Output Frequency 0.01 – 0.1Hz in steps of 0.01 Hz (default 0.1 Hz) – auto
frequency selection
Output Load 1 μF @ 0.1 Hz @ 44 kV RMS
5.0 μF @ 0.01 @ 44 kV RMS
10.0 μF max capacitance (at lower frequency
and Voltage)
Output Modes 
– VLF AC Sinewave yes
– VLF AC Squarewave yes
– DC (positive or negative polarity) yes
– Vacuum Bottle Test Mode (DC) yes
 – Cable Jacket / Sheath Testing yes
 – Sheath Fault Location yes
Breakdown Mode
– Fault Condition Mode yes
– Fault Trip Mode yes
Metering
– Voltage and Current True RMS and / or peak
– Capacitance 0.1 nF to 20 μF Range
– Resistance 0.1 MΩ to 20 GΩ
– Waveform Real time oscilloscope display of actual
output voltage waveform
Safety 50 / 60 Hz – 12 kV Feedback Protection /
Dual Discharge Device (internal)
Duty Cycle Continuous
Computer Interfaces USB, RS-485
Display Color touchscreen TFT 5.7 “ (115 × 86 mm)
Input Voltage (110 to 240) V AC ±10 %, 50 / 60 Hz
Consumption Power 1.2 kVA
Dimensions (H × W × D) 530 × 580 × 410 mm
Weight 60 kg

The KEP VLF-60 HiPot Cable Tester is designed for an indoors operation under the following conditions:

Condition Value
Air temperature, °С from -10 to +40
Relative humidity, %, up to 85 at +25 °С
Atmospheric pressure, kPa (mm hg) 84,0 – 106,7 (630 – 800)

 

The post KEP VLF60 HiPot Cable Tester appeared first on Obiat Electronics.

]]> KEP HVT-70/50 Portable AC DC Hipot Tester https://obiat.com.au/product/kep-hvt-7050-portable-ac-dc-hipot-tester/ Mon, 04 Sep 2017 00:00:17 +0000 http://obiat.com.au/?post_type=product&p=4099 KEP-Logo

The KEP HVT-70/50 High Voltage Tester performs DC high-voltage testing of power cables (IEC 60502-2) up to 70 kV, power cables accessories (IEC 61442) as well as AC high-voltage testing, up to 50 kV at 50 Hz, of switchgear, reclosers, dielectric insulators, highvoltage dischargers (arresters), busbars and other dielectric materials with relatively low electric capacitance.

Features:

  • Consists of the  HVTS- control unit and a HVU-G high voltage unit
  • Able to apply high voltage onto a material to test insulation with control of leakage current
  • Measures voltage directly at the load
  • Removal of residual capacitive charge using secondary winding of transformer
  • High resistance to external influences - casing with cover prevents dust and moisture damage
  • Analogue indicators - two built-in analogue scales on control unit for voltage and current measurement
  • High contrast graphical display and intuitive user interface
  • Automatic and manual testing modes - configure to your own specifications
  • Data saving to EEPROM - save up to eight presets for commonly used functions and save measurements to data
  • Indication of voltage value output by the high voltage unit
  • Auxiliary protection - blocks output if insulating gas pressure is low, temperature is high or if overcurrents are present
  • External shorting rod with visible shorting indication
  • Built-in pressure and temperature sensors
  • 2 Year Warranty

KEP Distributor

PDF Logo    KEP HVT(S) 70-50 Datasheet

PDF Logo    KEP-Hipot-Cable-Testing-Application-Note

The post KEP HVT-70/50 Portable AC DC Hipot Tester appeared first on Obiat Electronics.

]]> KEP HVT-70/50 Portable AC DC Hipot Tester

The KEP HVT-70/50 Portable AC DC Hipot Tester tests the insulation of high voltage cables and other non-liquid dielectric materials with this bundle pack from KEP Power Systems!

The KEP HVT-70/50 Portable AC DC Hipot Tester comes with the ability to perform testing both automatically or manually. In automatic mode, the system will control and adjust the unit using a built-in context menu which the user can navigate through. Alternatively, specific tests can be configured to the user’s specifications and up to eight preset functions can be stored for easy repeat testing in different applications.

The system includes both a control unit and a high voltage unit, allowing the user to apply specific configurations to the material under test. By using the control panel, the user can easily easily configure and test RMS values of both AC voltage and current and filters out the effects of crest factor to reduce the chance of error.

 

As the control unit is independent from the main system, the user can remain safe at all times by standing a safe distance away. Built-in auxiliary protection also automatically blocks output from the HV unit if insulating gas pressure is low, temperature is high and will block supply voltage if there is overcurrent present in the HVU supply circuit.

 

KEP HVT-70/50 Portable AC DC Hipot Tester Specifications

Parameter Value
Supply voltage single-phase alternating current, V 230 ± 23
Frequency, Hz 50 ± 2
Maximum power consumption, kVA, max 3
Highest output voltage, kV:
– AC 50
– DC 70
Highest output current, mA:
– on AC voltage 44
– on DC voltage 14
Reduced voltage error, %, max:
– AC voltage from 2 kV to 50 kV ± 3
– DC voltage from 2 kV to 70 kV ± 3
Reduced current error, %, max:
– AC from 1,0 mA to 45,0 mA ± 3
– DC from 0,5 mA to 14,5 mA ± 3
Maximum current threshold on the high-voltage side, mA, max:
– AC voltage 45
– DC voltage 14.5
Control Unit dimensions, mm, max   349 × 256 × 240
Control Unit Weight, kg, max 14
High Voltage Unit dimensions, mm, max  360 × 500 × 310
High Voltage Unit weight, kg, max 35

 

The post KEP HVT-70/50 Portable AC DC Hipot Tester appeared first on Obiat Electronics.

]]> HT ITALIA M75 Multitest True-RMS AC DMM & LAN Tester https://obiat.com.au/product/ht-italia-m75-multitest-true-rms-ac-dmm-lan-tester/ https://obiat.com.au/product/ht-italia-m75-multitest-true-rms-ac-dmm-lan-tester/#respond Mon, 29 Feb 2016 20:50:24 +0000 http://sitebuilds.net/rapidtech/?post_type=product&p=1146 HT ITALIA LOGO

Multifunction TRMS DMM for voltage AC/DC, Current AC, Frequency, Resistance measurements, Safety test on electrical plants and Wire mapping Test on LAN cables.

MULTITEST model M75 is an innovative instrument which joins together DMM, Safety Tester and LAN Checker features inside a compact and ergonomic user-friendly structure and with an extremely reduced weight (800g only).

The True RMS DMM is a professional instrument with True RMS measurement of AC/DC Voltage, AC/DC Current (through external clamp), Resistance and Frequency. Additional features are MAX/MIN/AVG function, HOLD function and PEAK detection with Response Time of 1ms, useful for surge current detection.

The Safety Tester features allow to perform test on electrical plants according to VDE0413. Continuity, insulation, global earth resistance, RCD's, phase sequence indication and phase coincidence using only one test lead - by just touching cables, even insulated - or two test leads. The innovative AUTO function permits to perform automatically the main safety tests on a plant (namely earth resistance, RCD's, insulation) by just connecting the instrument to a socket and pressing the START button, with a final response of OK or NOT OK.

LAN Checker detection of correct or incorrect wire mapping of a LAN cable with extremely simple indications about the errors found, to guide you step by step through the troubleshooting.

 WARRANTY3

The post HT ITALIA M75 Multitest True-RMS AC DMM & LAN Tester appeared first on Obiat Electronics.

]]> Functions DMM Section

  • DC Voltage.
  • AC True RMS Voltage.
  • AC True RMS Current with External Clamp.
  • AC True RMS Leakage Current with external clamp (optional).
  • DC Current.
  • Resistance.
  • Continuity test with buzzer.
  • Frequency with test leads.
  • Frequency with External Clamp.
  • MIN/MAX/ AVG functions.
  • PEAK function with response time 1ms.
  • HOLD function.

Safety Test Section

  • Continuity test (200mA) of protective conductors.
  • Insulation Resistance measurement (500V DC).
  • Trip-out time of RCD type AC Standard with test current of 30mA, 30 x 5mA, 100mA, 300mA.
  • Global Earth Resistance with RCD tripping.
  • Phase sequence indication at 1 or 2 wires.
  • Phase coincidence indication at 1 or 2 wires.
  • Leakage current (with HT96U optional clamp + NOCANBA connector).
  • AUTOTEST function: automatic sequence test of Global Earth Resistance + RCD test + Insulation test with OK, NOT OK indicates LAN SECTION..

LAN Section

  • Test executed on twisted pair cables UTP and STP with RJ45 connector.
  • Wire mapping control of following conditions: OPEN, SHORT, CROSS, REVERSE, SPLIT, MISWIRE message at display.
  • Quick selection of cable pairs.
  • Automatic detection of remote control units (from #1 to #8).
  • AutoPower OFF.
  • Low battery indication

Included Accessories

  • HT4003: 400A AC Current clamps.
  • C2075: Two terminal cable with SHUKO plug.
  • KIT0075: Set of 2 cables with test leads + 2 alligator clips.
  • No2 Remote identifier #1, #2.
  • No3 Patch cables, 30cm, RJ45 connectors.
  • BORSA75: carrying bag.
  • Calibration certificate ISO9000.
  • Instruction manual.
  • Warranty card.

  Optional Accessories

  • HT96U 1-100-1000A/1V leakage current clamp (jaw opening 54mm max. dia.).
  • NOCANBA adapter (for connection to HT96U clamp).
  • REM38 No.6 Remote identifier unit #3, #4, #5, #6, #7, #8.
  • REM3 remote unit #3 + connection cable RJ45-RJ45.
  • REM4 remote unit #4 + connection cable RJ45-RJ45.
  • REM5 remote unit #5 + connection cable RJ45-RJ45.
  • REM6 remote unit #6 + connection cable RJ45-RJ45.
  • REM7 remote unit #7 + connection cable RJ45-RJ45.
  • REM8 remote unit #8 + connection cable RJ45-RJ45.
General Specifications
Display Dual numeric, 9999 counts (73mm x 73mm)
Display Update 2 times/second
Conversion 16 Bit, AC True RMS
Sample Frequency 64 samples/period
Insulation class 2 (double insulation)
Pollution Degree 2
Overvoltage Category CAT III 550V AC Phase to Ground
CAT III 550V AC Phase to Phase
Reference Standards CE mark
EN 61557-4 Continuity Test
EN 61557-2 Insulation Resistance
EN 61557-5 Earth Resistance
EN 61557-6 RCD Test
EN 61326    EMC Standards
EN 61008
EN 61009
Power Supply 4 x 1.5 Volt type ‘AA’ alkaline batteries LR6, AM3, MN 1500
Dimensions 240mm (L) x 100mm (W) x 45mm (D)
Weight approx. 630g (including batteries)

The post HT ITALIA M75 Multitest True-RMS AC DMM & LAN Tester appeared first on Obiat Electronics.

]]> https://obiat.com.au/product/ht-italia-m75-multitest-true-rms-ac-dmm-lan-tester/feed/ 0 EXTECH CT40 Cable Identifier/Tester Kit https://obiat.com.au/product/extech-ct40-cable-identifiertester-kit/ https://obiat.com.au/product/extech-ct40-cable-identifiertester-kit/#respond Mon, 29 Feb 2016 20:27:22 +0000 http://sitebuilds.net/rapidtech/?post_type=product&p=1144 extech

Cable Identifier - 16 Cables

The Extech CT40 enables one person to troubleshoot electrical/electronic circuits and remotely identify up to 16 wires. Multimeter functions of the Extech CT40 include AC/DC voltage and current, resistance, diode and continuity.

With the Extech CT40 cable identifier/tester kit, you can check wire voltages from 5 to 16 VDC. Other features of the Extech CT40 cable identifier/tester kit includes data hold, max hold and auto power off. Both the Extech CT40 transmitter and receiver feature a low battery indicator. These Extech units also feature a CAT III-600V safety rating.

Authorised Australian Distributor

CE   CAT III   1 Year

The post EXTECH CT40 Cable Identifier/Tester Kit appeared first on Obiat Electronics.

]]> The Extech CT40 is a cable tester which uses a transmitter/receiver to allow for wire identification of an individual core to the end of a multi-core cable .The meter’s digital multimeter functions provides for easy measurement of AC/DC Voltage, AC/DC Current, Resistance, Continuity and Diode check. This device is shipped fully tested and calibrated and, with proper use, will provide years of reliable service. Please visit the Extech Instruments website (www.extech.com) to check for the latest version of this User Guide.

Extech CT40 Features:

  • Transmitter/Receiver enables one person to remotely identify up to 16 wires
  • Wire voltage check from 5 to 16VDC
  • Multimeter functions include: AC/DC Voltage and Current, Resistance, Diode, and Continuity
  • Data Hold and Max Hold
  • Low battery indicator (transmitter and receiver)
  • Auto power off
  • CAT III-600V safety rating
  • Complete with 16-line Transmitter, Multimeter/Receiver, two 9V batteries, pouch case, and 2 AAA batteries

Extech CT40 Specifications

Display Counts 2,000 count
Basic Accuracy 1.0%
DC/AC Voltage 0.1mV to 600VDC
1mV to 600VAC
DC/AC Current 0.1μA to 200mA
Resistance 0.1Ωto 20MΩ
Diode/Continuity Yes
Dimensions 6.3×2.9×1.7″(162×74.5x44mm)
Weight 10.8oz (308g)
Transmitter
Display Two red LED lamps
Test Leads 17 alligator clips (16 red and 1 black (ground))
Cable resistance 30kΩ max
Receiver
Display Two digit blue LED display
Test Leads 2 alligator clips (1 red and 1 black)

The post EXTECH CT40 Cable Identifier/Tester Kit appeared first on Obiat Electronics.

]]> https://obiat.com.au/product/extech-ct40-cable-identifiertester-kit/feed/ 0 EXTECH CT20 Continuity Tester Pro https://obiat.com.au/product/extech-ct20-continuity-tester-pro/ https://obiat.com.au/product/extech-ct20-continuity-tester-pro/#respond Mon, 29 Feb 2016 20:08:51 +0000 http://sitebuilds.net/rapidtech/?post_type=product&p=1140 extech

Extech CT20 Features:

  • A bright flashing LED and loud pulsating beeper indicate local continuity
  • Remote continuity with the use of the remote probe
  • Flashing remote probe - two lead, bi-color (red/green) LED probe allows a single user to identify up to three wires or cables at a time
  • Lightweight and pocketsized, clips on and hangs from the cable(s) under test without falling off
  • Great for Electricians and Helpers, Cable TV and Audio System Installers, Alarm Technicians, Plumbers, HVAC Installers etc.

 

The post EXTECH CT20 Continuity Tester Pro appeared first on Obiat Electronics.

]]> One person operation for wire and cable testing.

  • Local continuity checking –
    is accomplished by a bright flashing LED and loud pulsating beeper.
  • Remote continuity –
    with the use of the remote probe, it does not tie-up two people when identifying and labeling long distance wire/cable runs.
  • Flashing remote probe –
    Two lead, bi-color (red/green) LED probe allows a single user to identify up to three wires or cables at a time for correct labeling with only one trip to the other end location – cuts down on multiple trips back and forth.
  • Polarity verification –
    Drives a 20mA DC current pulse through the wires or cables under test to the bi-color remote probe. This enables the technician to identify each of the wires under test at the other end of the cable run and eliminates the possibility of false high impedance readings.
  • Lightweight / Pocketsize –
    clips on and hangs from the cable(s) under test without falling off.

The post EXTECH CT20 Continuity Tester Pro appeared first on Obiat Electronics.

]]> https://obiat.com.au/product/extech-ct20-continuity-tester-pro/feed/ 0 TENMARS TM-903 Multimedia Cable Tester https://obiat.com.au/product/tenmars-tm-903-multimedia-cable-tester/ https://obiat.com.au/product/tenmars-tm-903-multimedia-cable-tester/#respond Mon, 29 Feb 2016 19:51:31 +0000 http://sitebuilds.net/rapidtech/?post_type=product&p=1138 Tenmars_logo_05

The TM-903 Multimedia Cable Tester is a hand-held test instrument that lets you verify and troubleshoot the LAN cable of twisted pair.

It displays graph wire-map, opens, shorts, miss wires, split pairs and the remote ID number all on one screen.

Using multiple remote ID up to 8 locators to test on RJ-45 (UTP, STP) LAN cable, video coaxial cable and RJ11 voice cable.

Authorised Australian Distributor

WARRANTY 3

The post TENMARS TM-903 Multimedia Cable Tester appeared first on Obiat Electronics.

]]> Product Description

– Detects opens, shorts, miss wires and split pairs on twisted pair cabling.
– Measures length. 
– Low battery detector.
– Auto backlit.
– Auto power off

Specifications
Connector Types RJ-45, F-Connector and RJ11
Cable Category LAN cable (UTP, STP), video, coaxial cable and voice cable
Wire-Map Test Detects opens, shorts, miswires, split pairs
Length Test up to 255 meters (836 feet)
Length Resolution 0.1meter or foot
Length Units Meter and Foot
Accuracy ±10% + 1.0M (3ft)
Maximum Power (Operating) 20mA
Operating Temperature 5°C to 40°C, below 80% R.H.
Storage Temperature -10°C to 60°C, below 70% R.H.
Power 6 x 1.5V Type ‘AAA’ batteries
Battery Life Approx 200 times continuous testing
Dimensions 156mm (L) x 73mm (W) x 35mm (H)
Weight 170g approx.

The post TENMARS TM-903 Multimedia Cable Tester appeared first on Obiat Electronics.

]]> https://obiat.com.au/product/tenmars-tm-903-multimedia-cable-tester/feed/ 0 TENMARS ID2-8 Set of 7 Remote Locators https://obiat.com.au/product/tenmars-id2-8-set-7-remote-locators/ https://obiat.com.au/product/tenmars-id2-8-set-7-remote-locators/#respond Mon, 29 Feb 2016 19:47:36 +0000 http://sitebuilds.net/rapidtech/?post_type=product&p=1136 Tenmars_logo_05

TENMARS ID2-8 Set of 7 Remote Locators

AUD $62.70 • ( AUD $57.00 plus GST )

mm_logo_05

For use with the Tenmars TM-901 LAN Cable Tester, using multiple remote ID up to 8 locators to test on RJ-45 (UTP, STP) LAN cable, video coaxial cable and RJ11 voice cable.

The post TENMARS ID2-8 Set of 7 Remote Locators appeared first on Obiat Electronics.

]]> The post TENMARS ID2-8 Set of 7 Remote Locators appeared first on Obiat Electronics.

]]> https://obiat.com.au/product/tenmars-id2-8-set-7-remote-locators/feed/ 0 TENMARS TM-901N LAN Cable Tester https://obiat.com.au/product/tenmars-tm-901n-lan-cable-tester/ https://obiat.com.au/product/tenmars-tm-901n-lan-cable-tester/#respond Mon, 29 Feb 2016 19:31:38 +0000 http://sitebuilds.net/rapidtech/?post_type=product&p=1131 Tenmars_logo_05

TENMARS TM-901N  LAN Cable Tester Features/Benefits

  • LCD display with automatic backlight.
  • Detect opens, shorts, miswires and split pairs on twisted pair cabling.
  • Displays graph wiremap, opens, shorts, miswires, split pairs and remote ID numbers all on one screen.
  • Identify remote ID number on one pair only.
  • Measures distance.
  • Using multiple remote ID numbers up to 8 locations.
  • Auto shutoff.
  • Low battery detector.

Included accessories:

  • User’s manual
  • 9 volt battery
  • one 20cm CAT5 FTP cable
  • remote ID and one locator.

Authorised Australian Distributor

WARRANTY 3

The post TENMARS TM-901N LAN Cable Tester appeared first on Obiat Electronics.

]]> The Tenmars TM-901N has a backlit LCD screen displays graph wire-map, opens, shorts, miswires, split pairs and the remote ID number all on one screen.  Using multiple remote ID up to 8 locators to test on RJ-45 (UTP, STP) LAN cable.

Safety Precaution

Do not operate the meter under the environment with explosive gas (material), combustible gas (material) steam or filled with dust. z In order to avoid reading incorrect data, please replace the battery immediately when the symbol “ ” appears on the LCD.

In order to avoid the damage caused by contamination or static electricity, do not touch the circuit board before you take any adequate action.

Operating Environment: Indoors use. This instrument has been designed for being used in an environment of pollution degree 2.

Operation Altitude: Up to 2000M. z EMC: EN61326-1(2006), IEC 61000-4-2(2008, IEC 61000-4-3(2006) + (2007).

The verifier does the following:

Detects opens, shorts, miswires and split pairs on twisted pair cabling.

Displays graph wiremap , opens, shorts, miswires, split pairs, and the remote ID number all on one screen.

Identify remote ID number only one pair.

Measures length.

Using multiple remote ID up to 8 locators.

Low battery detector “ ”.

Auto backlight. z Auto power off

Battery Replacement

Turn off the meter and disconnect all test leads before replacing the battery. Use only the correct type of batteries, properly installed in the case, to power the meter.

Options and Accessories Consumers can order options and accessories as follows： Remote ID Locator Kit, numbers 2-8.

End of life Caution: this symbol indicates that equipment and its accessories shall be subject to a separate collection and correct disposal

The post TENMARS TM-901N LAN Cable Tester appeared first on Obiat Electronics.

]]> https://obiat.com.au/product/tenmars-tm-901n-lan-cable-tester/feed/ 0 HT ITALIA QUICKLAN6050 Wire Map Tester https://obiat.com.au/product/ht-italia-quicklan6050-wire-map-tester/ https://obiat.com.au/product/ht-italia-quicklan6050-wire-map-tester/#respond Mon, 29 Feb 2016 06:37:40 +0000 http://sitebuilds.net/rapidtech/?post_type=product&p=1126 HT ITALIA LOGO

QUICKLAN6050 perform quickly wire mapping test and length measurements on LAN networks twisted pair cables (UTP, STP, FTP type) with RJ45 connector according to EIA/TIA 568B. It signals eventual wrong connections (crossed, split, inverted couples, etc…), it can detect problems of the cable itself (open circuits, short circuits) and save results inside internal memory. HT6050 can perform test also on BNC coax cables. By using up to 4 numbered remote units it’s also possible to quickly detect the connection between the RJ45 sockets located in the working rooms and the ones located on the transposition panel or on the HUB.

[caption id="attachment_1611" align="alignnone" width="147"]HT Italia Warranty HT Italia Warranty[/caption]

The post HT ITALIA QUICKLAN6050 Wire Map Tester appeared first on Obiat Electronics.

]]> The HT Italia QUICKLAN6050 quickly and easily performs wire mapping tests and length measurements on LAN networks twisted pair cables (UTP, STP, FTP type) with RJ45 connectors according to EIA/TIA 568B. It signals any incorrect connections, such as crossed, split, inverted couples, etc., and can detect problems with the cable itself including open circuits and short circuits saving test results  inside it’s internal memory. The HT Italia QUICKLAN6050 can also undertake testing of BNC coaxial cables. By using up to 4 numbered remote units it is also possible to quickly detect the connection between the RJ45 sockets located in the network, and the ones located on the transposition panel or on the hub.

Features:

  • Testing of LAN cable UTP, FTP, STP with RJ45 connectors
  • Testing of BNC coaxial cables
  • Detection errors including open, short, reversed, crossed, split couples
  • Error message function on display
  • Length measurements of cables up to 350m
  • Detection of up to 4 remote units
  • Internal memory for saving test results
  • Auto power off

Product Description

  • Test on LAN cable UTP, FTP, STP with RJ45 connector
  • Test on BNC coax cables
  • Detection error: open, short, reversed, crossed, splitted couples
  • Error message at display
  • Lenght measurements of cables up to 350m
  • Detection up to 4 remote units
  • Internal memory for saving test
  • Auto Power OFF

Accessories

STANDARD
  • Remote unit #1
  • Patch cable RJ45, FTP, 20cm, 2 pcs
  • Carrying bag
  • Batteries
  • User manual

Optional accessories:

  • 6050MARKER0204: Remote units #2, #3, #4

The post HT ITALIA QUICKLAN6050 Wire Map Tester appeared first on Obiat Electronics.

]]> https://obiat.com.au/product/ht-italia-quicklan6050-wire-map-tester/feed/ 0