clamp Archives - Obiat Electronics https://obiat.com.au/product-tag/clamp/ keeping your industry up and running Sun, 23 Jan 2022 07:16:21 +0000 en-AU hourly 1 https://wordpress.org/?v=6.9 https://obiat.com.au/wp-content/uploads/2016/05/obiat_logo_2-100x100.jpg clamp Archives - Obiat Electronics https://obiat.com.au/product-tag/clamp/ 32 32 PROVA CM-05 AC/DC Current Probe https://obiat.com.au/product/prova-cm-05-acdc-current-probe/ https://obiat.com.au/product/prova-cm-05-acdc-current-probe/#respond Sun, 29 May 2016 21:36:44 +0000 http://obiat.com.au/?post_type=product&p=3675 Prova_Logo

PROVA CM-05 Features:
  • Accurate AC/DC current probe for current measurements.
  • 10mA DC, and 1mA AC resolution.
  • One touch zero for AC amps adjustment.
  • Jaw opening: 23mm diameter.
  • Easy single rotary switch for any function selection.
  • Connect to an oscilloscope for waveform observation.
  • Connect to a data logger or DMM for recording or measurement.
  • CAT II 600V, CAT III 300V.
  • Accessories supplied with instrument: Two 1.5 volt batteries (installed), User's Manual, Test Leads, and Carrying Bag.
PDF Logo    Prova CM-05 Datasheet

The post PROVA CM-05 AC/DC Current Probe appeared first on Obiat Electronics.

]]> PROVA CM-05 Electrical Specifications: (23℃±5℃) Range Output Accuracy DCA 0-4A DC 100mV/A ±2.0%±0.005A DCA 0-40A DC 10mV/A ±1.0%±0.02A DCA 0-150A DC 1mV/A ±1.0%±0.2A DCA 150-200A DC 1mV/A -2.2%±0.2A ACA 0-4A AC 100mV/A ±2.0%±0.005A (40-1KHz) ACA 0-40A AC 10mV/A ±1.5%±0.03A (40-1KHz) ACA 0-150A AC 1mV/A ±1.5%±0.3A (40-1KHz) ACA 150-200A AC 1mV/A -2.2%±0.3A (40-1KHz) Range Sensitivity DCA 0-4A 0.1mV/1mADC DCA 0-40A 0.1mV/10mA DC DCA 0-200A 0.1mV/100mA DC ACA 0-4A 0.1mV/1mA AC ACA 0-40A 0.1mV/10mA AC ACA 0-200A 0.1mV/100mA AC
PROVA CM-05 General Specifications:
Conductor Size: 23mm max. (approx.)
Battery Type: two 1.5V SUM-3 AA
Range Selection: manual
Power Consumption: 6 mA (approx.)
Low battery Indication: red LED lights
Operating Temperature: -10°C to 50°C
Operating Humidity: less than 85% relative
Altitude: up to 2000M
Storage Temperature: -20°C to 60°C
Storage Humidity: less than 75% relative
Dimension: 183mm (L) x 61.3mm (W) x 35.6mm (H)
7.2″ (L) x 2.5″ (W) x 1.4″ (H)
Weight: 190g (battery included)
Accessories: Carrying bag x 1 Users manual x 1 1.5V battery x 2
Test leads

 

The post PROVA CM-05 AC/DC Current Probe appeared first on Obiat Electronics.

]]> https://obiat.com.au/product/prova-cm-05-acdc-current-probe/feed/ 0 KYORITSU 2033 AC/DC 300 Amp Clampmeter https://obiat.com.au/product/kyoritsu-2033-acdc-300-amp-clampmeter/ https://obiat.com.au/product/kyoritsu-2033-acdc-300-amp-clampmeter/#respond Tue, 12 Apr 2016 08:08:58 +0000 http://sitebuilds.net/rapidtech/?post_type=product&p=2694 Kyoritsu_Logo_main

Features

  • The smallest clampmeter in the Kyoritsu range capable of AC and DC current measurements.
  • 300 Amp auto ranging has minimum resolution of
    0.01A AC/DC.
  • Auto-zero function to allow one touch zero adjustment.
  • Included Accessories: Two (2) type LR44 1.5V Alkaline Batteries, Instruction Manual and Carrying Case.

The post KYORITSU 2033 AC/DC 300 Amp Clampmeter appeared first on Obiat Electronics.

]]> KYORITSU 2033 Specification:
AC Current

 

 0A to 40A
20A to 200A
200A to 300A		 50/60Hz ±1% of rdg ±4 dgts
±1.5% of rdg ±4 dgts
±3.5% of rdg
0A to 40A
20A to 200A
200A to 300A		 20Hz to 1kHz ±2.5% of rdg ±4 dgts
±2.5% of rdg ±4 dgts
±4.0% of rdg
DC Current 0A to 40A
20A to 200A
200A to 300A		 ±1% of rdg ±4 dgts
±1.5% of rdg ±4 dgts
±3.0% of rdg
Conductor Size 24mm maximum
Safety Standard IEC 61010-1 CAT III 300V
IEC 61010-2-032
Frequency Response DC, 20Hz to 1kHz
Withstand Voltage 3700V AC for 1 minute
Power Source Two (2) type ‘AA’ LR44 Alkaline 1.5V batteries
Dimensions 147mm (L) x 59mm (W) x 25mm (D)
Weight 100g approx.

 

Note : ◇During current measurement, keep the KYORITSU 2033 transformer jaws fully closed. Otherwise,accurate measurement cannot be made. The maximum measurable conductor size is approx. 24mm in diameter. ◇Unlike in DC current measurement, zero adjustment is not necessary in AC current measurement. There is no polarity in the reading either.

KYORITSU 2033 Sleep Function.

This is a function to prevent the instrument from being left powered on in order to conserve battery life. This function causes the instrument to go into the Sleep (powered-down) mode about 5 minutes after the last switch or button operation. To exit the Sleep mode, turn the Function Selector switch back to “OFF”, then to any other position, or press any button.

The post KYORITSU 2033 AC/DC 300 Amp Clampmeter appeared first on Obiat Electronics.

]]> https://obiat.com.au/product/kyoritsu-2033-acdc-300-amp-clampmeter/feed/ 0