It will also measure DC current to 2000A and DC voltage to 1000V.

Martindale CMi210 Features:

• Insulation resistance test from 50V to 1000V up to 6GΩ
• Insulation resistance test to 6GΩ
• True RMS AC current 1500A
• DC current to 2000A
• True RMS voltage to 750V
• DC voltage to 1000V
• Continuity with audible indication
• Duty cycle, resistance, capacitance , frequency, temperature
• Tests DC voltage to 1000V
• Test AC voltage to 750V
• Resistance testing with range up to 60MΩ
• Capacitance measurements to 6mF
• Frequency testing to 10MHz
• Duty cycle calculations
• Temperature measurements using type K thermocouple
• Insulation testing with selectable testing voltage of 50V, 100V, 250V, 500V and 1000V

The CMi210 has all the same test functions you would expect to find on a high specification multimeter with the added benefit of temperature measurement.

Martindale CMi210 Specifications

The post Martindale CMi210 AC/DC TRMS Insulation Clamp Meter appeared first on Obiat Electronics.

The CM95 with it’s TRMS capability ensures accurate and reliable AC current measurement for distorted waveforms caused by today’s power electronics and non-linear loads.

Measurements are accurate and reliable with 3 ranges up to 400A AC and resolution of 1mA in the 4A range. The light weight flexible sensor head will accommodate conductors up to 85mm in diameter and can be threaded through very small apertures. Unlike conventional current transformers there is no maximum overload limitation.

The CM95’s separate display module is fitted with a 1.8m lead giving even more freedom when working in areas with restricted access and is backlit for viewing in low light conditions. The Hold function can be used for saving displayed values and for longer term monitoring, the auto power off function can be easily disabled and Min/Max values recorded.

The CM95 is  CATIV 600V safety rated making the flex meter ideal for utility and industrial current measurement applications.

The CM95 is supplied with alkaline batteries and manual. All Martindale clamp meters come with a 2 year warranty.

Martindale CM95 Specifications:

The post Martindale CM95 AC TRMS High Resolution Flex Meter appeared first on Obiat Electronics.

• Large transformer jaws of 68mm diameter
• Able to clamp on all three or four wires (3 phases) together for leakage current measurement.
• True RMS enables an accurate measurement for distorted waveforms.
• Measurement from mA up to AC 1000A
• Frequency filter switch to eliminate the effect of the harmonics.
• 2 way analogue output terminal
• Resolution 0.1mA
• Data-hold function.
• Peak-hold function.
• Minimises the effects of stray magnetic fields.
• Rotary switch for easy one finger operation.
• LCD screen with backlight.

Using the Kyoritsu 2413R Leakage Clamp Meter

KYORITSU 2413R Leakage Clamp Meter Specifications:

Using the AC & DC Output Connector of the KYORITSU 2413R

The post KYORITSU 2413R Leakage Clamp Meter / 1000A appeared first on Obiat Electronics.

RUGGED AND SAFE
Made with the quality and reliability you have come to expect from FLIR test and measurement tools

• Work more safely with the CAT IV safety ratings
• Safely store test leads when not in use with the built-in test lead holder
• Keep the test leads out of your way when you’re not using them – the length is short enough to minimize interference, yet long enough to get the job done.

RICH FEATURES
Equipped with the capabilities you need including True RMS, AC/DC voltage and current, continuity, resistance, and capacitance

• Measure True RMS AC/DC voltage and current, continuity, resistance, and capacitance
• Work efficiently in dimly lit areas using the bright LED worklight and backlit display
• Detect live AC voltages with the built-in non-contact voltage (NCV) detector
• Improve accuracy of readings with True RMS measurements
• The VT8-600 has a CAT III-600 V/CAT IV-300 V safety rating and a 100A/600V measuring range.
• The VT8-1000 has a CAT III-1000 V/CAT IV-600 V safety rating and a 200A/1000V measuring range.

FLEXIBLE, EASY TO USE
Designed for long, trouble-free operation so you can focus on the task at hand

• Take measurements in tight spaces with the optimized jaw design, and measure large-diameter cables with the wide jaw opening
• Operate the meter with one hand thanks to the compact, ergonomic design
• View information easily at any distance on the large multi-function LCD display

FLIR VT8-600 & FLIR VT8-1000 Specifications:

The post FLIR VT8-600 and VT8-1000 Voltage-Current-Continuity Open Jaw Testers appeared first on Obiat Electronics.

The Kyoritsu 2056R is a digital clamp meter is designed to meet international safety standard IEC 61010-1 CAT IV 600V and has the capability to read current up to 1000A AC/DC. The 2056R model features True RMS measurements providing greater accuracy on non-sinusoidal  and distorted waveforms.

The Kyoritsu 2056R also features a data hold function and peak hold function, as well as the ability to measure resistance up to 60MΩ. Temperature can be measured using an additional probe (not supplied) and capacitance can be tested. In addition, a max/min function is available to display the maximum and minimum values during a set period of time.

Furthermore, the tester has a non-contact voltage function, warning the user of AC voltage via a red LED indicator. Ergonomically designed, the Kyoritsu 2056R comprises a double moulded construction and features a bar graph display with backlight, for testing in low light conditions.

Kyoritsu 2056R Features:

• Measures up to 1000A AC.
• True RMS.
• Measures up to 600V AC/DC.
• Capacitance test.
• Designed to meet international safety standard IEC 61010-1 CAT IV 600V.
• 40mm jaw size
• Max/min function.
• Temperature between -50°C amd +300°C (probe not supplied).
• Measures resistance up to 60MΩ.
• Peak hold function.
• Double moulded construction.
• Auto power off
• Data hold function.
• Bar graph display with backlight.

Kyoritsu 2056R Specifications:

The post Kyoritsu 2056R 1000A TRMS Digital AC/DC CAT IV Clamp Meter appeared first on Obiat Electronics.

Kyoritsu 2510 Features:

• Memory function stores up to 192000 data useful for monitoring the signals over time and fault finding
• Transfers data to PC via Bluetooth
• Top class measurement 0.2% accuracy
• 6mm clamp jaw is easy to use in tight places
• LED light for illuminating the measurement spot
• Analog output terminal to allow the connection to a recorder or a digital multimeter

Kyoritsu 2510 DC Milliamp Process Clamp Applications:

• Residential
• Industrial
• Commercial
• Electrical Engineering
• Electronic Testing

Kyoritsu 2510 Specifications

See Datasheet above for full specifications:

The post Kyoritsu 2510 Milliamp Process Clamp Logger appeared first on Obiat Electronics.

The Kyoritsu 2500 is a high precision millliamp clamp meter with a specified 0.02% accuracy. Possessing a 0.01mA resolution, the 2500 model is capable of measuring DC current from 0.01mA to 120mA.

The Kyoritsu 2500 DC Milliamp Process Clamp Meter is ideal in maintaining and troubleshooting process and automation equipment without breaking the loop and interuppting the process.

The Kyoritsu 2500 DC Milliamp Process Clamp Meter comprises a 6mm clamp jaw, allowing the meter to be utilised in tight working conditions. An analog output terminal is also present on the tester, providing the ability to integrate a recorder or logger.

Kyoritsu 2500 DC Milliamp Process Clamp Meter Specifications:

The post Kyoritsu 2500 Milliamp Process Clamp Meter appeared first on Obiat Electronics.

SEW 2960CL 1000A TRUE RMS AC CURRENT CLAMP METER FEATURES:
● True RMS measurement.
● Pocket size.
● 4000 counts.
● Full automatic measurement.
Voltage measurement.
Current measurement.
Resistor measurement.
● Data hold function.
● Continuity check.
● Diode measurement.
● Select function.
●  Low battery indication.
● Auto off function.
● Flashlight (Auto off in 1 minute).
● Re-power on by pushing any of the push buttons or by changing the rotary switch mode after auto power off.

The post SEW 2960CL 1000A TRUE RMS AC CURRENT CLAMP METER appeared first on Obiat Electronics.

The FLIR CM46 Clampmeter offers MAX/MIN/AVG recording, frequency measurement, and electrical field detection to help you determine voltage presence and relative strength of the field. Made with an over-molded, easy-to-grip design, the CM46 Clamp Meter is durable enough to withstand a one meter drop, and the slim form factor is convenient to carry in your toolbag anywhere you go.

Accurate and Precise measurements
High accuracy and resolution on lower current small gauge wires

• Accu-Tip enables more accurate amperage measurements on smaller-gauged wires
• MAX/MIN/AVG recording, and frequency and diode measurement
• Data hold, zero function, and low pass filter for voltage measurement

Engineering you can have confidence in
Built rugged to last you for years to come

• Durable to withstand a 1 meter drop, and operates at -10 to 50°C (14 to 122°F)
• Large, bright backlit display makes readings easy to see
• Tough, over-molded, easy-to-grip design and slim, portable size

The Flir CM46 gives Professional performance at an affordable price
Provides all the critical features you need

• Built to accept up to a 30mm max conductor
• Electrical field detection determines if voltage is present and the relative strength of the field for safety
• True RMS professional clamp meters

Flir’s Accu­Tip™ Technology

You may not have heard of Accu­Tip™ technology because it is brand new in the CM4X ClampMeter Family. Small gauge wire measurements have never been more accurate. The CM46 leads them into the tenth of a digit where their numbers count for something. Plus MAX/MIN/AVG recording, that comes standard, no pencil and paper required.

Flir CM46 Specifications:

The post FLIR CM46 400A AC/DC Digital True RMS Clamp Meter with Temperature appeared first on Obiat Electronics.

The FLIR CM44 offers MAX/MIN/AVG recording, frequency measurement, and electrical field detection to help you determine voltage presence and relative strength of the field. Made with an over-molded, easy-to-grip design, the CM44 Clamp Meter is durable enough to withstand a one meter drop, and the slim form factor is convenient to carry in your toolbag anywhere you go.

Precise, accurate measurements
High accuracy and resolution in lower current applications

• Accu-Tip™ enables more accurate amperage measurements on smaller-gauged wires
• MAX/MIN/AVG recording, and frequency and diode measurement
• Data hold, zero function, and low pass filter for voltage measurement

Engineering you can have confidence in
Built rugged to last you for years to come

• Durable to withstand a 1 meter drop, and operates at -10 to 50°C
• Large, bright backlit display makes readings easy to see
• Tough, over-molded, easy-to-grip design and slim, portable size

Professional performance at an affordable price
Provides all the critical features you need

• Built to accept up to a 30mm max conductor
• Electrical field detection determines if voltage is present and the relative strength of the field for safety
• True RMS professional clamp meters

Accu­Tip™ Technology

You may not have heard of Accu­Tip™ technology because it is brand new in the CM4X Clamp Meter Family. Small gauge wire measurements have never been more accurate. The CM44 leads them into the tenth of a digit where their numbers count for something. Plus MAX/MIN/AVG recording, that comes standard, no pencil and paper required.

Flir CM44 Specifications:

The post FLIR CM44 400A AC True RMS Clamp Meter including Temperature appeared first on Obiat Electronics.