With an ergonomic and drop-tested design, the FLIR VP52-2 is the right choice for professionals performing field troubleshooting and verification of electrical installations within residential, commercial, and industrial buildings

The FLIR VP52-2 Non-Contact AC Voltage Detector detects the presence of AC voltage at electrical outlets, junction strips, electrical circuits, and other devices without having to contact the device physically.

The VP52-2 has a minimum excitation voltage of 190 V AC (this is its normal, or low sensitivity, mode) and a high sensitivity mode allowing detection down to 24 V AC. Tactile vibration, audible beeper, and visual cues alert the user when AC voltage is present.

FLIR VP52-2 Features:

• Beeper sound
• Vibration feedback alarms
• Optimized High/Low sensitivity ranges
• Multi-color LED alarm indicators
• Bright flashlight
• Dual LED illuminator at probe tip
• ON/OFF button with auto power off (APO)
• CAT IV 1000 V safety rated
• Low battery indication (status LED flashing amber)
• Robust pocket clip
• Limited Three-Year Warranty
• 3 metre drop-tested

Description

1. AC Voltage sensor
2. Tip lighting
3. Alarm indicator
4. Status indicator
5. Power button: ON (short press); OFF (long press); Low/high sensitivity toggle (short press with meter ON)
6. Pocket clip
7. Flashlight ON/OFF button (long press)
8. Battery compartment access cap
9. Flashlight

FLIR VP52-2 Specifications

The post FLIR VP52-2 Non-Contact AC Voltage Detector with 3 Alarm Indication appeared first on Obiat Electronics.

Indicates the following status;

• No Earth
• Line Neutral
• Reversal
• No Neutral
• Line Earth Reversal
• No Line

• ELCB can be tested with test currents from 10mA, 20mA, 25mA, 30mA and 35mA

Accessories;

Instruction Manual, Carrying Case, Test Certificate

Size(HxWxD):130mm x 69mm x 32mm
Weight:130g

The post Socket Polarity and earth leakage tester | CEM DT-903 appeared first on Obiat Electronics.

Bluetooth communication

Kyoritsu 6516BT has a Bluetooth communication function and can exchange data with Android/ iOS tablet devices.

Before starting to use this function, download the special application “KEW Smart *” via the internet.

Large LCD & HELP function

• All the test data is shown in one large colored screen.
• HELP function will show how to connect the instrument according to the function selected

Operation in 3 simple steps & Hands free testing

1. Set the rotary dial to your testing range.
2. Connect the instrument to the installation under test.
3. Press the test button.(By remote probe or using the Lockdown function of the test button.)

Anti-Trip Technology (with 2 & 3 wire)

For no trip LOOP L-PE testing on all RCDs.
With 3 wire (L, N, PE), to get the best accuracy readings.
With 2 wire only, very useful in case of no Neutral (i.e. 3-phase motor lines).

Loop Impedance 0.001 resolution

High test current range of 2Ω with 0.001Ω resolution.

Zs/Ra Limit

Zs Limit compares the values required by Electrical Installations Standard with measured results.

The verification of safety requirement on an electrical installation is simplified by using Zs/Ra Limit function. This function will automatically check if the measured loop impedance for TN (or earth loop for TT) is low enough to trip (disconnect) the MCB / Fuse / RCD giving the result of PASS or FAIL on the display.

SPD test

SPD (Surge Protection Device) which contains varistor can be tested measuring the tripping voltage without damage it.

PAT test

PAT test (PAT = Portable Appliance Tester) It is possible to check the insulation resistance and earth bond continuity of portable appliances for class I and II.

Connectivity

Use the PC application KEW Report to improve work efficiency.

KYORITSU 6516 can download the test data by connecting the USB adaptor (Model 8212-USB) and then print complete Test Reports by a PC.

The post Kyoritsu 6516 Multi Function Electrical Tester appeared first on Obiat Electronics.

Designed according to the requirements of field professionals, HT Italia HT9 is must-have troubleshooting tool.

Two pole voltage meter with Lamp Test. With built-in gas-filled lamp tester and non-contact phase sequence/conformity tester

Digital two pole voltage tester HT Italia HT9 provides daily use features. In addition to DC/AC voltage measurement and continuity test, HT9 also offers gas-filled lamp test and phase sequence/conformity detection features. To overcome difficult pinpointing of the right cable within a frame on a switchboard under poor light conditions, a built-in white LED flashlight makes testing possible and easy even in dark environments. The slim and ergonomic design of HT9 is highly appreciated by contracting electricians, field professionals, troubleshooters as well as any vkind of user. Designed according to the requirements of field professionals, HT9 is must-have troubleshooting tool.

Figure 2 – HT Italia HT9 LED and Display Description
1.	Voltage indication leds
2.	Buzzer hole for acoustic signal
3.	Indication led Lamp test
4.	Indication led Phase sequence
5.	Indication led Phase detection / Dangerous voltage
6.	Indication led Continuity test
7.	Indication led 12V and positive or negative polarity
8.	LCD display with voltage, polarity and flat battery indic

HT Italia HT9 Specifications:

The post HT Italia HT9 Two-pole CAT IV Voltage Tester with Lamp Test appeared first on Obiat Electronics.