The MP-MFT40 safety tester is used to verify the safety of Commercial, Domestic and Industrial installations.

 MP-MFT40 Safety Tester Features:

• Insulation tests up to 1000V
• RCD testing type A, AC, ACS, AS up to 1000mA
• 30mA RCD auto test
• RCD ramp test
• Continuity with null function
• No trip loop
• High Current loop
• 1m ohm, resolution loop results
• PFC / PSC results
• Phase rotation
• Hands free function
• Polarity touch pad
• Voltage present LED
• Large colour screen
• Precision test leads / colour coded prods and clips / remote probe
• Battery powered : 6 AA (R06 / LR06

The post MP-MFT40 Professional Multifunction Installation Tester appeared first on Obiat Electronics.

Bluetooth communication

Kyoritsu 6516BT has a Bluetooth communication function and can exchange data with Android/ iOS tablet devices.

Before starting to use this function, download the special application “KEW Smart *” via the internet.

Large LCD & HELP function

• All the test data is shown in one large colored screen.
• HELP function will show how to connect the instrument according to the function selected

Operation in 3 simple steps & Hands free testing

1. Set the rotary dial to your testing range.
2. Connect the instrument to the installation under test.
3. Press the test button.(By remote probe or using the Lockdown function of the test button.)

Anti-Trip Technology (with 2 & 3 wire)

For no trip LOOP L-PE testing on all RCDs.
With 3 wire (L, N, PE), to get the best accuracy readings.
With 2 wire only, very useful in case of no Neutral (i.e. 3-phase motor lines).

Loop Impedance 0.001 resolution

High test current range of 2Ω with 0.001Ω resolution.

Zs/Ra Limit

Zs Limit compares the values required by Electrical Installations Standard with measured results.

The verification of safety requirement on an electrical installation is simplified by using Zs/Ra Limit function. This function will automatically check if the measured loop impedance for TN (or earth loop for TT) is low enough to trip (disconnect) the MCB / Fuse / RCD giving the result of PASS or FAIL on the display.

SPD test

SPD (Surge Protection Device) which contains varistor can be tested measuring the tripping voltage without damage it.

PAT test

PAT test (PAT = Portable Appliance Tester) It is possible to check the insulation resistance and earth bond continuity of portable appliances for class I and II.

Connectivity

Use the PC application KEW Report to improve work efficiency.

KYORITSU 6516 can download the test data by connecting the USB adaptor (Model 8212-USB) and then print complete Test Reports by a PC.

The post Kyoritsu 6516 Multi Function Electrical Tester appeared first on Obiat Electronics.

Able to test to IEC 61439-1 Standard that will be mandatory by 2021 for testing Switchboards.

The Metrel Electrical Safety Manager (MESM) PC software enables upload of automated test sequences, projects, downloading of test results, automatic data storage into a file and printing of professional test reports specially designed for specific applications. Due to selected test functions, durable construction and accompanying PC SW package MI 3325 MultiServicerXD is the perfect instrument for electrical safety testing in the most demanding industrial environments and automated production lines or specialized workshops.

Metrel MI 3325 Measuring Functions

• Continuity (2-wire & 4-wire), 0.2 A, 4 A, 10 A, 25 A + voltage drop @ 10 A;
• HV AC, HV AC programmable 100 V – 5000 V;
• Insulation resistance (Riso, Riso-S) 50 V, 100 V, 250 V, 500 V, 1000 V (DC);
• Sub-leakage current, (Isub, Isub-S) 110 V (AC), 230 V (AC);
• Z loop – fault loop impedance and prospective fault current (Ipsc, Ulpe, Uc(P));
• Zs rcd – fault loop impedance and prospective fault current in system with RCD (Ipsc, pe, Uc(P));
• Z line – line impedance and prospective short-circuit current (Ipsc, Uln);
• Functional test (power P/S/Q, voltage, current, cos fi, frequency, ThdU, ThdI, PF);
• Touch leakage current;
• RCD testing (RCD Uc, RCD t, RCD I);
• Differential leakage current;
• PE leakage current;
• Polarity;
• Clamp current;
• Voltage, Frequency, phase rotation;
• Varistor test;
• Voltage drop;
• Discharging time.

Metrel MI 3325 Key Features

• Touch screen: high resolution colour touch screen, 4.3” TFT.
• Double manipulation: keyboard and touch screen enable the user to control the instrument in any manner they like.
• Pre-defined AUTOSEQUENCE®s: enable the user simple and quick execution of test sequence for the chosen device.
• Support for RCD testing: A, AC, B, B+ and F RCDs.
• Testing of welding equipment (only in combination with A 1422): MultiServicerXD support testing of welding equipment in accordance with IEC/EN 60974-4.
• Functional inspections.
• Visual inspections.
• Custom inspections (visual and functional).
• Built-in help screens for referencing on site.
• Built-in fuse tables for automatic evaluation of the line / loop impedance result.
• Monitoring of all 3 voltages in real-time.
• Hi-pot: high voltage AC (5 kV @ 250 VA).
• Continuity: 4 – wire continuity test with selectable test current (0.2 A, 4 A, 10 A, 25 A) enabling precise measurements.
• Communication: RS-232, USB, Ethernet and Bluetooth communication ports enabling downloading, uploading and remote control over instrument.
• Multi-system testing: the instrument can be used on TT, TN, IT and 115 V supply systems.
• Automated RCD testing procedure (RCD AUTO).
• Automated impedance testing procedure (Z AUTO).
• Measurement filtering according to the selected area group.
• Large memory: support for microSD memory cards, 8 GB card already integrated in the instrument, although that can be expanded to 32 GB.
• PC SW Metrel ES Manager: enables creation of test structures, user-defined AUTOSEQUENCE®s, professional test reports and data transfer for archiving.

Software

• PC SW Metrel ES Manager: enables creation of test structures, user-defined AUTOSEQUENCE®s, professional test reports and data transfer for archiving.

Metrel MI 3325 Standard Accessories

• • • Instrument MI 3325 MultiServicerXD
    • HV test lead with test probe
    • HV test lead with crocodile
    • Mains cable
    • IEC test cable
    • Residual voltage test cable
    • Plug test cable
    • 3-wire test lead, 3 m
    • Continuity test lead, 2.5 m, 2 pcs
    • Test lead, red, 1.5 m
    • Test probe, 4 pcs (black, red, green, blue)
    • Crocodile clip, green
    • Crocodile clip, blue
    • Crocodile clip, black, 3 pcs
    • Crocodile clip, red, 3 pcs
    • Calibration certificate
    • RS-232 cable
    • USB cable
    • Short instruction manual
    • CD with instruction manual (full version)
    • PC SW Metrel ES Manager BASIC *
    • Protective bag for accessories (mounted on the case)

* Metrel ES Manager can be downloaded free of charge from Metrel Web server.

The post Metrel MI 3325 Multifunction Tester appeared first on Obiat Electronics.

Autorange measurements with automatic AC/DC detection
LoZ low impedance voltage input to eliminate ghost voltage readings (caused by the capacitive coupling among active conductors close each other)
One-lead phase sequence detection

JUPITER is provided with ISO9000 calibration certificate as standard.

HT ITALIA JUPITER Multi-Function Multimeter Features:

• Autorange measurements with automatic AC/DC detection.
• DC, AC TRMS, AC+DC TRMS voltage up to 690V.
• Tripping time of RCDs type A and AC up to 300mA*.
• Tripping current of RCDs type AC up to 30mA. ›
• Non-trip earth ground resistance. ›
• Line-to-Neutral, Line-to-Line and Line-to-Ground impedance (resolution 0.1Ohm) with prospective short-circuit/fault current calculation.
• Current up to 3000A by means of clamp-on or flexible external transducer.
• Dynamic inrush current of motors and loads through the DIRC function allowing time base selection.
• Leakage current by means of the clamp-on transducer HT96U.
• Voltage and current harmonics with THD% calculation and function to the 25th Harmonic showing highest harmonic values first.
• One-lead phase sequence detection.
• Low impedance voltage input to eliminate ghost voltage readings.
• DC, AC TRMS, AC+DC TRMS current by means of external transducer.
• Frequency of voltage and/or current.
• Resistance and continuity with buzzer.
• MIN/MAX/PEAK/HOLD functions.
• 6000 count Display

HT ITALIA JUPITER Multi-Function Multimeter Functions

TRMS
AC/DC voltage	690V / AC+DC
LoZ Input
AC/DC current	AC+DC with external clamp transducer
Frequency
Resistance and continuity test with buzzer
RCD tripping time	30mA, 100mA, 300mA A/AC
RCD trip current measurement	RCD A/AC 30mA
Leakage current (with optional accessory HT96U)
Non-trip earth resistance
Voltage and current harmonics up to the 25th and THD%
Loop impedance P-N, P-P, P-PE and calculation of prospective short-circuit current
Electric motor starting current (INRUSH)
Auto x1/2, x1, x2, x5, 0°, 180°
Phase sequence
Out come OK/NOT OK	According with IEC60364-6
Backlit LCD display
Measurement category	CAT IV 600V
Measuring counts	6000
MAX/MIN/HOLD
Bargraph

HT Instruments JUPITER Standard Accessories:

• C2033AU Three wire cable Red, Black, Green with Australian plug
• 4324-2 Pair of test tips Red/Black 2/4mm straight banana
• YABAT0001HT0 Alkaline battery 1.5V, type AAA, IEC LR03, 4 pcs
• YABRS0002HT0 Carrying bag
• YAMUM0066HT0 User manual on CD-ROM
• YAMUM0065HT0 Quick reference guide
• Calibration certificate ISO9000.

 

HT Instruments JUPITER Optional Accessories:

• F3000U AC flexible clamp with 30/300/3000A full scales
• HT96U* AC current clamp with 1/100/1000A full scales
• HT97U* AC current clamp with 10/100/1000A AC full scales
• HT98U* DC current clamp with 1000A full scale
• HT4006 AC/DC current clamp with 40/400A full scales
• NOCANBA Hypertac-to-banana adapter* Adapter NOCANBA required.

The post HT ITALIA JUPITER Multi-Function Multimeter appeared first on Obiat Electronics.

MEASURES:

›    Earth Resistance with 2- or 3-pole volt-ampere method in TT, TN and IT systems, non-trip earth loop impedance measurement, stackless earth ground resistance measurement  with T2100 (optional).

›    Soil Resistivity with 4 pole Wenner method.

›    RCD Testing type A, AC, B with test current up to 10A.**

›    Insulation Resistance measurement with test voltage up to 1000V.

›    Continuity measurement of protective conductors with test current up to 200mA.

›    Advanced Loop Testing of MCBs, fuses and cable sizing.

›    Measurement of phase sequence (SEQ).

›    Measurement and recording of environment parameters and leakage currents through external probes.

HT INSTRUMENTS GSC60 for the Analysis of Power Quality and Energy Consumption.

›    9 types of electrical systems: 1Φ-2wires, 1Φ-split phase, 3Φ-3 wires, 3Φ-Aron, 3Φ-Open Δ, 3Φ-Open Y, 3Φ-2 el. 1/2, 3Φ-4 wires Y, 3Φ-High Leg.

›    632 parameters can be recorded for over two months.

›    Real Time. Real-time display of all waveforms, harmonics, vector diagrams as well as summary function on phases for a quick reading of the most important parameters.

›    Voltage Anomalies. Detection of voltage anomalies with a resolution of 20ms.

›    Energy Saving. One click allows you to check all the electrical absorption of all the equipment connected to the main power supply and save on energy costs.

Live. Real Time Analysis.

Wi-Fi connection allows you to display wave forms, vector diagrams, harmonics and all electrical parameters for each phase on your tablet/smartphone/PC

GSC60 helps to dispel the myth that recording analysis is complex. App HTanalysis makes it simple and clear. Using ZOOM Functions you can display all the recorded quantities. JUMP Function displays harmonics in any recording step just by clicking on the quantity.

HT INSTRUMENTS GSC60 Functions:

The post HT INSTRUMENTS GSC60 Professional Electrical Power Analyzer appeared first on Obiat Electronics.

The special remote probe (optional) and the auto internal function are useful when performing sequential measurements of earth resistance. A contextual help, selectable by the user, is available for each meter range function. The model can also save each test result inside memory and can transfer saved data to a PC through an optical/USB interface with dedicated Windows software (purchased as an option). Each measurement is saved with all sub-results including test parameters with up to two ID locators (selectable by user on meter) in order to reach the exact point where the measurement was performed.

Its features include: continuity test with 200 mA range; insulation measurement ranges 50, 100, 250, 500, and 1000 VDC; trip out time of RCDs type AC (automatic and manual modes); trip out current of RCDs (automatic and manual modes); loop impedance P-P, P-N, P-PE; loop impedance P-P, P-N, P-PE with high-resolution 0.1 MΩ using the IMP57 optional accessory; protective short circuit current; contact voltage; global earth resistance without tripping RCDs; phase sequence indication; auto function – automatic sequence test of global earth resistance + RCD test + Insulation and leakage current.

HT Italia Combi 419 Functions:

The post HT Italia Combi 419 Multifunction Installation Tester appeared first on Obiat Electronics.

The special remote probe (optional) and the auto internal function are useful when performing sequential measurements of earth resistance. A contextual help, selectable by the user, is available for each meter range function. The model can also save each test result inside memory and can transfer saved data to a PC through an optical/USB interface with dedicated Windows software (purchased as an option). Each measurement is saved with all sub-results including test parameters with up to two ID locators (selectable by user on meter) in order to reach the exact point where the measurement was performed.

Its features include: continuity test with 200 mA range; insulation measurement ranges 50, 100, 250, 500, and 1000 VDC; trip out time of RCDs type AC (automatic and manual modes); trip out current of RCDs (automatic and manual modes); loop impedance P-P, P-N, P-PE; loop impedance P-P, P-N, P-PE with high-resolution 0.1 MΩ using the IMP57 optional accessory; protective short circuit current; contact voltage; global earth resistance without tripping RCDs; phase sequence indication; auto function – automatic sequence test of global earth resistance + RCD test + Insulation and leakage current.

HT Italia Combi 420 Features:

• Continuity test with 200mA
• Insulation with 50, 100, 250, 500, 1000VDC
• Trip out time of RCDs type AC, A Standard and Selective
• Trip out current of RCDs type AC, A Standard and Selective (up to 1A)
• Loop Impedance P-P, P-N, P-PE
• Loop Impedance with high accuracy (with IMP57 optional accessory)
• Prospective short circuit current
• Contact voltage
• Global Earth Resistance without RCD tripping
• Phase sequence indication
• AUTO function (Ra + RCDtest + Insulation) on plug
• AC TRMS voltage and current
• Active, Reactive, Apparent power and power factor on single phase system
• Harmonics voltage/current up the 49th and THD% on single phase system
• Environmental parameters measure (°C, °F, %RH, Lux, sound level)
• Measure with remote probe (PR400 optional accessory)
• Leakage current
• Data HOLD
• Contextual help at display
• Optical-USB interface with PC connection
• Internal memory

The post HT Italia Combi 420 Multifunction Installation Tester appeared first on Obiat Electronics.

The HT Italia Combi G2 comes equipped with an inbuilt Wi-Fi, allowing easy data transfer to iOS/Android device of your choice, and USB cable for PC. This way report printing can be done either on site, or from the comfort of your office.

The HT Italia Combi G2 comes with no shortage of accessories, like HT96U, that allows to measure the leakage current. Or IMP57, capable of carrying out high resolution (0.1mOhm) loop/line impedance measurements with prospective short-circuit current calculation. So even when close to power stations, the user will be able to correctly size the protection devices in any system.

HT Italia Combi G2 Function:

• Continuity of protection conductors with 200mA
• Insulation resistance with 50, 100, 250, 500,1000V DC
• Type A, AC, and B general, selective, and delayed RCDs up to 1000mA
• Test on earth leakage relay RCDs (with RCDX10 optional accessory)
• Line/fault impedance with prospective short circuit current calculation
• High resolution line/fault impedance (with IMP57 optional accessory)
• Curve B, C, D, and K MCBs and type gG and aM fuses
• Selection of length, type, and insulation of the cable under test
• Selection of tripping time of the protection device under test
• Non-trip earth loop impedance
• Phase sequence indication
• Voltage drop on main power lines
• Power Analysis, Harmonic analysis up to 25th
• Leakage current by means of the external transducer HT96U (optional)
• Environmental parameters (C/F, HR%, Lux) by means of optional probes
• TFT display with touch-screen
• Help on-line
• Internal memory
• USB interface to connect to the PC
• Built-in WiFi interface to connect to iOS and Android devices
• Rechargeable NiMH batteries (external battery charger)

The post HT Italia Combi G2 Multifunction Installation Tester appeared first on Obiat Electronics.

HT Italia EquiTest 5071 performs:

• Continuity measurements with 200mA,
• Line/Loop impedance with high resolution (0.1mOhm – with IMP57 optional accessory),
• global earth resistance without RCDs tripping and phase sequence indication.

Each test can be saved inside the internal memory and downloaded to PC by using supplied Windows software.

HT Italia EquiTest 5071 Features:

• Continuity on protective conductors with 200mA
• Continuity on protective conductors with 10A and voltage <12V
• Continuity with 10A in compliance with IEC/EN60204-1:2006
• 4 wires measurement method
• Line/Loop impedance with calculation of the prospective short circuit current
• Line/Loop impedance with high resolution (with IMP57 optional accessory)
• Global earth resistance without RCDs tripping
• Contact voltage
• Phase rotation with 3 wires method
• Save results inside memory
• Recall measured test at display
• Optical/USB interface for PC communication
• Auto Power OFF
• Backlight

Standard Accessories:

• C2033X : Cable 3 wires with Shuko plug
• UNIVERSALKIT : Set 3 cables + 3 alligator clips + 1 test lead
• C5700 : Power cord for test 10A
• C7000 : Set of cables for 10A test, lenght 3m
• BORSA2051 : Soft carrying bag
• TOPVIEW2006 : Windows software + optical/USB cable C2006
• ISO9000 calibration certificate
• User manual on CD-ROM
• Quick reference guide

Optional Accessories:

• C7000/05 : Set cables for 10A test, 5m length
• C7000/10 : Set cables for test 10A, 10m length
• IMP57 : Accessory for high resolution Loop/Line Impedance
• CN0050 : Set of straps for use of meter on neck
• 1066-IECN : Connector for banana cables, black colour

The post HT Italia EquiTest 5071 Multifunction Installation Tester appeared first on Obiat Electronics.