Extech ETK30 Electrical Test Kit consists of:

EX205T: TrueRMS Digital Multimeter with 2000 Count Large LCD Display

Autoranging True RMS meters providing a more accurate reading when measuring distorted waveforms. EX210T with built-in IR Thermometer allows for quick non-contact Temperature measurements.

This special value Electrical Test Kit is assembled to provide all the electrical testing needs for installation and repair of electrical systems and HVAC equipment.

MA430: 400A AC Clamp Meter + NCV Compact Size AC Clamp Meter with 6 Functions

Compact size allows measurements in tight locations and built-in Non-Contact Voltage Detector with LED alert. Three models to choose from: MA430, MA430T and MA435T AC AC/DC models with True RMS option and advanced multimeter functions including Capacitance, Frequency and Temperature.

Specifications

The post Extech ETK30 Electrical Test Kit with AC Clamp Meter appeared first on Obiat Electronics.

The Extech ETK35 Electrical Test Kit consists of:

EX205T: TrueRMS Digital Multimeter with 2000 Count Large LCD Display
Autoranging True RMS meters providing a more accurate reading when measuring distorted waveforms. EX210T with built-in IR Thermometer allows for quick non-contact Temperature measurements.

MA435T: 400A True RMS AC/DC Clamp Meter + NCV Compact Size AC Clamp Meter with 10 Functions
Compact size allows measurements in tight locations and built-in Non-Contact Voltage Detector with LED alert. Three models to choose from: MA430, MA430T and MA435T AC AC/DC models with True RMS option and advanced multimeter functions including Capacitance, Frequency and Temperature.

Extech ETK35 Features

• Test leads
• Batteries
• Attractive storage case that provides protection and organization for the meters and accessories

EX205T Features

• True RMS for better accuracy when measuring distorted waveforms
• Patented built-in IR Thermometer with laser pointer for locating hot spots with 4:1 Distance to Target Ratio (EX210T model only)
• 2000 count large backlit dual LCD with easy-to read digits
• Low current capability with resolution to 0.1μA
• Max Hold
• Input fuse protection
• Auto power off and Data Hold
• Complete with test leads and 9V battery

MA435T Features

• 400A True RMS AC/DC Clamp Meter + NCV
• True RMS for better accuracy when measuring distorted waveforms
• Functions include: AC/DC Current, AC/DC Voltage, Resistance, Frequency, Capacitance, Temperature, Diode and Continuity
• Built-in non-contact Voltage detector with LED alert
• 1.2″ (30mm) jaw size for conductors up to 350MCM
• Backlit LCD display
• Data Hold, Auto Power Off and Low Battery indication

Specifications

The post Extech ETK35 Electrical Test Kit with True RMS AC/DC Clamp Meter appeared first on Obiat Electronics.

Extech CT40 Features:

• Transmitter/Receiver enables one person to remotely identify up to 16 wires
• Wire voltage check from 5 to 16VDC
• Multimeter functions include: AC/DC Voltage and Current, Resistance, Diode, and Continuity
• Data Hold and Max Hold
• Low battery indicator (transmitter and receiver)
• Auto power off
• CAT III-600V safety rating
• Complete with 16-line Transmitter, Multimeter/Receiver, two 9V batteries, pouch case, and 2 AAA batteries

Extech CT40 Specifications

The post EXTECH CT40 Cable Identifier/Tester Kit appeared first on Obiat Electronics.

The Extech EX505 True RMS Autoranging Multimeter. This meter measures AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency, Diode Test, and Continuity plus Thermocouple Temperature. It features a waterproof, rugged design for heavy duty use This meter is shipped fully tested and calibrated

The Extech Model DC400 clamp meter that measures up to 400A DC. This device is shipped fully tested and calibrated.

The Extech Model 42510 IR Thermometer. This thermometer measures and displays non-contact (infrared) temperature readings at the touch of a button. The built-in laser pointer increases target accuracy while the backlit LCD and handy push-buttons combine for convenient, ergonomic operation

Extech AUT600 Specifications

The post EXTECH AUT600 Automotive Testing & Troubleshooting Kit appeared first on Obiat Electronics.

Comprehensive Tools You Need for Industrial, Electrical & HVAC Predictive Maintenance

To maximize uptime, you need tools that help you effectively maintain the efficiency and performance of your plant’s equipment — electrical/electronic as well as heating/cooling. Extech’s TK430-IR Kit equips you with four versatile tools that can help you find problems before they shut down a production line, affect food quality in the cold chain, or disable air conditioning in a commercial building.

EX430 True RMS digital multimeter

Compact and powerful, the Extech EX430 11-Function True RMS Pro MultiMeter provides the versatility of multiple meters in one convenient device. The EX430 measures AC/DC voltage and current, resistance, frequency, and temperature along with testing for diodes and continuity. Autoranging functionality provides ease of use, large backlit display with 1-inch high digits allow for easy reading, and the ergonomically designed housing offers comfortable, one-handed operation.

MA200 400 amp Clamp Meter

The perfect complement to the EX430, the MA200 features a 400 amp AC rating and an ample 0.9-inch (23mm) jaw opening that can accommodate conductors up to 300 MCM. The 4-digit (2,000-count) readout is easy to read and you can operate the meter with one hand using the thumb-dial selector that is ergonomically placed off to the side. You can select auto- or manual-ranging, and besides current readings you can measure voltage, resistance and perform diode and continuity tests.

42510 Infrared Thermometer

In addition to being able to take temperature measurements using the EX430’s Type K wire probe, the kit’s 42510 Infrared Thermometer lets you make safe, point-and-shoot, non-contact temperature measurements. The 42510 features a useful 8:1 distance ratio, which means that at a safe distance of 8 inches you are getting a temperature reading focused on a tight, one-inch spot. The 42510 not only ensures technicians can perform all essential electrical diagnostics, the IR makes it easy to identify overheating motors, stressed bearings, overloaded electrical panels, abnormal vent temperatures, and other components from a distance with point-and-shoot laser accuracy. The compact IR thermometer has broad troubleshooting applications with its wide temperature range from -58 to 1000 degrees F.

40130 NCV Detector

The test kit adds value with the included non-contact voltage detector. Use this compact pen-style voltage detector before you start any job. Suitable for many industrial applications with its 100-volt to 600-volt AC range, you can quickly and conveniently check for AC voltage prior to attaching your multimeter’s test leads to the device under test. When testing connections, terminations, outlets or near wire insulation with live voltage, a bright red LED flashes to illuminate the tip along with an audible beep that can be disabled. Backed by a one-year limited warranty, the TK430-IR kit comes with two sets of CAT-III test leads and Type K thermocouple bead probes, 9-volt batteries, and a custom carrying case.

The post EXTECH TK430-IR Industrial Troubleshooting Kit appeared first on Obiat Electronics.

eXTECH MA620 600A True RMS Autoranging AC Clamp Meter

The right-sized MA620 clamp meters offer plant maintenance techs and electricians a test instrument with a host of advanced functions beyond its robust current measurement capabilities. Compact and easy to hold, the MA620’s True RMS and autoranging functions makes is easier to capture accurate and quick readings in industrial environments or commercial job sites. The meter’s 600A rating and ample 1.5 inches (40mm) jaw opening can accommodate most jobs, swallowing conductors up to 750 MCM. The MA620 is full-feature instrument. You can select auto- or manual-ranging and measurement functions cover all types of troubleshooting over and above noninvasive current probe measurements: voltage, resistance, capacitance, frequency, duty cycle, diode and continuity tests. Even measure temperature with the supplied Type K bead wire probe. In addition, the large, illuminated, dual display makes it easier to perform inspections in poorly lit areas. The 4-digit (6,000 count) readout is complemented by a bargraph display to simulate an analog display, and the meter’s thumb-dial selector that ergonomically placed off the side of the meter means the MA620 can be used one-handed.

True RMS Enhances Diagnostics

It can be very difficult to make accurate current and voltage readings in industrial and commercial applications when electronic devices are present. Fluorescent lights, motor drives, computer power supplies, and other electronic systems can distort the AC waveform, making it difficult for averaging meters to capture accurate readings. The MA620’s True RMS capability utilizes a more advanced formula to compensate for this kind of distortion. Also for improved diagnostics and troubleshooting users are able to select one of several one-button functions: press HOLD to freeze a reading on the LCD; MAX/MIN tracks and display maximum and minimum values (useful for blind measurements); and REL activates Relative mode for “zeroing out” the meter, useful for improving the accuracy of DC current measurements.

Other Features

One important safety tool that is built in to the MA620 is a non-contact voltage (NCV) detector. The detector quickly identifies the presence of voltage on live wires and alerts the user with a red LED indicator. For you, this eliminates the need for a separate tester, offering you more value, added safety, and less tool bag clutter.

Extech EX505 Industrial DMM

The Extech EX505 was designed specifically for industrial, plant maintenance, MRO, electrical and other professionals who demand a meter as tough as you. The waterproof and drop-proof EX505 Industrial Multimeter delivers essential multimeter capabilities you need along with True RMS precision. Designed to withstand harsh environments and usage, the meter’s rugged, double-molded housing is IP67-rated (waterproof and dustproof) as well as drop-tested to 6 feet. The large, illuminated LCD displays a 4-digit readout (to 4,000 counts). The EX505 is capable of capturing critical measurements, including capacitance, frequency (dual sensitivity for electrical and electronic applications), diode and continuity functions. You also get convenient, one-button access to frequently used functions: Data Hold and Relative Hold as well as selectable auto-ranging or manual-ranging. To avoid fussing with selecting the right measurement range when working on a variety of components from small electronics to main electrical sources, the meter automatically adjusts with autoranging. As with the clamp meter, the EX505 features True RMS, which enables troubleshooters to capture truer readings in the presence of non-sinusoidal waveforms and noise. The meter can also take temperature measurements using the DMM’s Type K bead wire probe. The meter features 0.5 percent accuracy and it is backed by a CATIV overvoltage safety rating, protecting users even on outdoor wiring.

MA620-K DMM/Clamp Kit Includes:

EX505 DMM, MA620 Clamp Meter, Test Leads, Type-K Thermocouple Beaded Probe and Adapter, and Magnetic Hanging Strap.
What’s Included:
one set of test leads, type K bead wire temperature probe (-4 to 482F/-20 to 250°C), one 9V battery, and carrying case.

Model MA620
True RMS
Display counts	6000
AC Current	0.01A to 600.0A
DC Current	—
Basic Accuracy	(ACA) 2.8%
DC Voltage	0.1mV to 600V
AC Voltage	1mV to 600V
Resistance	0.1Ω to 60.00MΩ
Frequency	0.001Hz to 10.00kHz
Capacitance	0.01nF to 4000.0μF
Temperature	-4 to 1400°F (-20 to 760°C)
Duty Cycle	0.1 to 99.9%
Diode
Continuity
Dimensions	232 x 77 x 39mm
Weight	271g

The post EXTECH MA620-K Industrial Test Kit appeared first on Obiat Electronics.