Kyoritsu 2510 Features:

• Memory function stores up to 192000 data useful for monitoring the signals over time and fault finding
• Transfers data to PC via Bluetooth
• Top class measurement 0.2% accuracy
• 6mm clamp jaw is easy to use in tight places
• LED light for illuminating the measurement spot
• Analog output terminal to allow the connection to a recorder or a digital multimeter

Kyoritsu 2510 DC Milliamp Process Clamp Applications:

• Residential
• Industrial
• Commercial
• Electrical Engineering
• Electronic Testing

Kyoritsu 2510 Specifications

See Datasheet above for full specifications:

The post Kyoritsu 2510 Milliamp Process Clamp Logger appeared first on Obiat Electronics.

The Kyoritsu 2500 is a high precision millliamp clamp meter with a specified 0.02% accuracy. Possessing a 0.01mA resolution, the 2500 model is capable of measuring DC current from 0.01mA to 120mA.

The Kyoritsu 2500 DC Milliamp Process Clamp Meter is ideal in maintaining and troubleshooting process and automation equipment without breaking the loop and interuppting the process.

The Kyoritsu 2500 DC Milliamp Process Clamp Meter comprises a 6mm clamp jaw, allowing the meter to be utilised in tight working conditions. An analog output terminal is also present on the tester, providing the ability to integrate a recorder or logger.

Kyoritsu 2500 DC Milliamp Process Clamp Meter Specifications:

The post Kyoritsu 2500 Milliamp Process Clamp Meter appeared first on Obiat Electronics.

• 0 – 100 PSI (7 Bar) (including and not limited to an inch of water)
• Connections (2 ports) 1/8″ NPT/BSP
• Weight – 1 lb
• Made in the USA

Magnum Pro MP-P Features:

• Delrin® Plastic handle prevents body heat transfer
• Oversized check valves for smooth controlled operation
• Mash proof vent valve (No Needle Valve)
• A patented non-oil based lubricant is used on all moving parts
• Dual O-Rings on all pistons to ensure zero leakage
• Recessed vent knob to prevent damage from dropping
• 2 year warranty

Points to Remember:

• Insure that all gauges and Instruments to be callbrated are dis· connected from process pressures prior to connecting
  the pump. The maximum pump design pressure for both the MP·P and MP·V Is 150 pslg.
• Connection to a pressure source greater than 150 pslg could cause serious Injury to person or damage to the pump.
• The fittings and tubing on both the MP·P and MP·V are unique. To reattach tubing to any fittin& heat the tubing end
  with a heat gun or boiling water to soften the material. Then put the tubing onto the fitting with a twisting motion.
• For best results, operate either pump with the vernier turned the mid position.

Magnum Pro MP-P Models

• MP-P
• MP-P + HK-1: adds a 2ft non-stretch hose kit w/ fittings for side port.
• MP-PKT: includes Pump, a black padded canvas case embroidered with orange thread, 2ft non-stretch hose, fittings and Winchester Engineering M-2 stainless steel 2” analog gauge w/ protective rubber boot.*
• MP-PKT-FIT: includes everything in the MP-PKT plus FasTest universal quick connect kit and coupler for Swagelok tube fittings.*
• MP-PRK: Rebuild Kit for MP-P

The post Magnum Pro MP-P Pressure Calibration Pump appeared first on Obiat Electronics.

• Delrin® Plastic handle prevents body heat transfer
• Oversized check valves for smooth controlled operation
• Mash proof vent valve (No Needle Valve)
• A patented non-oil based lubricant is used on all moving parts
• Dual O-Rings on all pistons to ensure zero leakage
• 2 year warranty

MAGNUM PRO MP-V Specifications

• MP-V 0-28″Hg (depends on barometric pressure)
• Connections (2 ports) 1/8 inch NPT
• Weight 1.5lbs
• 2ft hose and 1/4 inch fitting
• Made in the USA

Points to Remember:

• Insure that all gauges and Instruments to be callbrated are dis· connected from process pressures prior to connecting
  the pump. The maximum pump design pressure for both the MP·P and MP·V Is 150 pslg.
• Connection to a pressure source greater than 150 pslg could cause serious Injury to person or damage to the pump.
• The fittings and tubing on both the MP·P and MP·V are unique. To reattach tubing to any fittin& heat the tubing end
  with a heat gun or boiling water to soften the material. Then put the tubing onto the fitting with a twisting motion.
• For best results, operate either pump with the vernier turned the mid position.

MAGNUM PRO MP-V Models:

• MP-V: Standalone
• MP-V + HK-1: adds a 2ft non-stretch hose kit w/ fittings for side port. Note: Kits, hoses and fittings can be customized upon request.
• MP-VKT: Kit includes a black padded canvas case embroidered in orange thread, 2ft non-stretch hose, fittings and Magnum pro M-4 stainless steel analog gauge 2″ 1/2 w/ protective rubber boot.
• MP-VKT+HK-1: MP-VKT plus a 2ft non-stretch hose kit w/ fittings for side port. Note: Kits, hoses and fittings can be customized upon request.

The post MAGNUM PRO MP-V Vacuum Calibration Pump appeared first on Obiat Electronics.

MAGNUM PRO MVP-600 Specifications:

• Vacuum 28″Hg to pressure 600psi (combination pump)
• Compatible with all gauges and calibrators
• Connections (2 ports) 1/4″ and 1/8″ NPT/BSP
• Weight – 2lbs
• Made in the USA

MAGNUM PRO MVP-600 Features:

• Contoured cushion handles
• Oversized check valve for smooth controlled operation
• Mash proof vent valve (No Needle Valve)
• A patented non-oil based lubricant is used on all moving parts
• Dual O-Rings on all pistons to ensure zero leakage
• 2 year warranty

Points to Remember:

• Insure all gauges and instruments to be calibrated are discon­nected from process pressures before connecting the
  pump. Do not exceed 600 psi (41 bar) as this is the MVP6OO’s maximum pressure.
• The MVP-600 has ‘l/8″ and ‘l/4″ BSP ports. In order to use NPT fittings, the required NPT to BSP parallel thread
  adapters need to be Installed (Adapters are Included)
• Do not use thread sealant paste or tape on the male adapters {Female adapters may be sealed with paste or tape).
  Bonded washers (Included) are required to Insure a proper seal. To seal the adapters, simply hand-tighten and snug
  up with a wrench. Do not over-tighten.
• The MVP-600 utilizes a Schrader valve instead of a needled valve. Thus full open or closed is several turns from the end of the travel. Over-tightening does not increase the seal.

MAGNUM PRO MVP-600 Models

• MVP-600: Standalone.
• MVP-600KT: includes Pump, a black padded canvas case embroidered with orange thread, 2ft non-stretch hose, fittings, additional rubber bonded washers and (2) adaptors.*
• MVP-600WIN: includes everything in the MVP-600KT plus Winchester Engineering Model 1 Auto Ranging Digital Gauge™ w/ N.I.S.T. certification and versatile hook.*
• MVP-600WIN-FIT: includes everything in the MVP-600WIN plus FasTest universal quick connect kit and coupler for Swagelok tube fittings.*
• MVP-600RK: Rebuild Kit for MVP-600 (includes: Bonded Washers, O-Rings, a Schrader Valve, a X-Ring, a Pressure Valve Spring, a Vacuum Valve Spring, a Ring Retain Clip, a Plug Shorty, Krytox High Performance Grease – GPL215, GPL226)

The post MAGNUM PRO MVP-600 Pneumatic Calibration Hand Pump appeared first on Obiat Electronics.

MAGNUM PRO M-10 Specifications:

• 0 – 10,000 PSI (700 Bar)
• Compatible with most hydraulic fluids, oils and water
• Connections (2 ports) 1/4″ NPT/BSP
• Weight – 3 lbs
• Made in the USA

MAGNUM PRO M-10 Features:

• Contoured cushion handles
• Patented protective cage around vent knob
• Priming feature
• Patented triple filtration (prevents pump failure caused by dirt)
• A non-oil based lubricant is used on all moving parts
• Built in pressure relief valve (prevents over pressurizing)
• Shatter proof reservoir
• Oversized check valves for smooth controlled operation
• 2 year warranty

Points to Remember:

• Do not exceed maximum pressure of 10,000 psi (700 bar).
• In order to use NPT fittings, the required NPT to BSP Parallel thread adapters need to be installed (adapters included).
• Do not use thread sealant paste or tape on the male adapters {Paste or tape may be used on female adapters).
• Bonded washers (included) are required to insure a proper seal. To seal the adapters, simply hand-tighten and snug up with a wrench. Do not over-tighten.
• Use with distilled water or mineral-based hydraulic oil.

MAGNUM PRO M-10 Models

• M-10: standalone
• M-10KT: includes M-10 with hydraulic pump, 3ft high pressure hose, fittings, protective carrying case, 3 filters, test point, and fluid bottle
• M-10WIN: includes M-10 w/Winchester Engineering Model 1 Auto Ranging Digital Gauge™ (vacuum to 3K PSI)
• M-10WIN-FIT: includes everything in the M-10WIN plus FasTest universal quick connect kit and coupler for Swagelok tube fittings

The post MAGNUM PRO M-10 Hydraulic Calibration Pump appeared first on Obiat Electronics.

• Simulates output ranges of 4mA, 12mA and 20mA from transmitter
• Ideal for checking calibration and as a current source for setting up engineering units on a process indicator or controller
• Bright red LEDs indicate simulation output or battery status
• Accurate to 0.1mA • Overload indication when load exceeds 240Ω
• Compact case features push button output selector switch
• Dimensions: 389 x 58.4 x 25.4mm; Weight: 283.5g
• Complete with calibration cable and 9 volt battery

The Extech 412440-S current loop checker is a low cost, pocket-sized checker for simulating current loops. Featuring the ability to instantly determine if your device needs calibration, the Extech 412440-S current loop checker is ideal for checking calibration and as a current source for setting up engineering units on a process indicator or controller. The Extech 412440-S current loop checker simulates output ranges of 4mA, 12mA, and 20mA from the transmitter.

Bright red LEDs indicate the simulation output or the battery status. The Extech 412440-S current loop checker is accurate to 0.1mA, and there is overload indication when the load exceeds 240Ω. The compact case features a push button output selector switch.

The post Extech 412440-S Calibration Source Checker appeared first on Obiat Electronics.

Extech 412300A allows you to measure and source current readings simultaneously whivh can be beneficial to a many people who regularly complete jobs involving measuring current. The Extech 412300A Current Calibrator/Meter is an oyster flip device made easier to use by its ability to be stood up on a bench or workspace.

For added ease of use coupled with the oyster flip case of this measuring current device, it also comes with a detachable strap that can be hung around your neck leaving you completely hands free to undertake other tasks at the same time.

Extech 412300A has also been programmed with five preset calibration values for fast calibration calculations in the field for efficient working.

The memory feature provides the user with five (5) user programmable source values for stepped calibration outputs. The feature is available for mA and % units in the SOURCE mode. The stored values are kept in non-volatile memory (memory that is retained even after power is removed from the calibrator).

Source from the stored memory values: 1. Select the Source mode as described earlier 2. Press the MEM button. The M1 icon (memory location 1) will appear in the display and the value stored in that location will be displayed and sourced. 3. Repeated pressing of the MEM button will step through the 5 memory locations. NOTE: The “SOURCE” icon will blink when the output value has not reached a stable level. The common cause for the “SOURCE” icon to remain blinking is that the load impedance is too high in the current mode.

Storing values into memory: 1. As described above, select and display a memory location (M1, 2, 3, 4, or 5) 2. Use the ▲ ▼buttons to adjust the display to the desired source value. 3. Press and hold the MEM button for > 2 seconds. The displayed value will be stored in the displayed memory location. Default memory values. Five common source values are permanently programmed in memory as the default values. These values can be replaced by user selected values.

To reset the meter to the default memory values: 1. Turn the meter on and select the SOURCE mode. 2. Press and hold the POWER button until appears in the display and then release the POWER button. The memory locations will revert to the default values. Default Memory Values M1 M2 M3 M4 M5 are 4mA, 8mA, 12mA, 16mA, 20mA (0% 25% 50% 75% 100%).

Extech 412300A Specifications:

The post Extech 412300A Process Current Calibrator/Meter appeared first on Obiat Electronics.

The design of the Extech 412355A is user friendly making you more efficient at your job by being able to control your device with just one hand, leaving the other free to complete any other task. The oyster case has a flip up display that makes this product perfect for holding in one hand or placing on top of a benchtop when you need to note down any of the current meter measurements that have been taken. For added ease of noting them down, the device can also store up to 5 calibration values that can be recalled later.

Extech 412355A Product Specifications Summary:

The post Extech 412355A Current and Voltage Calibrator/Meter appeared first on Obiat Electronics.

True RMS & Enhanced Diagnostics

Part of the Extech’s precision is its True RMS functionality. It can be very difficult to make accurate current and voltage readings in industrial and commercial applications when electronic devices are present. Fluorescent lights, motor drives, computer power supplies, and other electronic systems can distort the AC waveform, making it hard for averaging meters to get an accurate read. True RMS uses a more advanced formula to compensate for this kind of distortion. In addition to its high performing, 100 kHz ACV bandwidth that paints a more detailed picture of measurements, the MM570A offers a wide array of frequently used functions: maximum/minimum recording with autoranging, Auto Power off; Relative and Hold; and a robust Peak function that captures transient pulses. And, having two Type K thermocouple inputs make differential temperature (delta-T) calculations easier for R&D testing such as intake vs. exhaust component cooling tests or industrial and HVAC applications like superheat and sub-cooling measurements.

Other Features

Plant mechanics and electrical troubleshooters can be confident the meter is backed by a CAT IV-600V & CAT III-1000V overvoltage safety rating, protecting users even on devices connected to raw voltage distribution lines.

Features

• Full range multimeter functions with 0.02% basic DCV accuracy and up to 100kHz True RMS ACV bandwidth
• 50,000 count (500,000 for DCV and Hz) backlit LCD display with bargraph
• Special True RMS combination AC+DC function for measurements of rectified AC (non-symmetrical) voltage & current waveforms
• Filtered frequency function with adjustable trigger levels for variable speed motor drives and high voltage applications
• AC/DC current to 10A with 0.01µA resolution
• 4 to 20mA, displayed as 0-100% for process current measurements
• Capacitance, Frequency, Resistance, Continuity, Duty cycle and Diode tests with 1000V input protection on all functions
• Dual input Temperature function -50 to 1000°C  with T1, T2 and T1-T2 display in °F or °C
• High resolution to 1µV, 0.0001Hz, 0.01Ohm, 0.01µA and 0.1°
• Max/Min recording with autoranging, Auto Power off, Relative & Hold, Peak function captures transient pulses
• Optional Windows® compatible PC communication software and optically isolated cable
• Complete with test leads, Type K thermocouple probe, protective holster with stand and 9 Volt battery

Specifications

The post Extech MM570A Precision Multimeter appeared first on Obiat Electronics.