Lan Testers Archives - Obiat Electronics

HT ITALIA M75 Multitest True-RMS AC DMM & LAN Tester

Mike — Mon, 29 Feb 2016 20:50:24 +0000

Functions DMM Section

DC Voltage.
AC True RMS Voltage.
AC True RMS Current with External Clamp.
AC True RMS Leakage Current with external clamp (optional).
DC Current.
Resistance.
Continuity test with buzzer.
Frequency with test leads.
Frequency with External Clamp.
MIN/MAX/ AVG functions.
PEAK function with response time 1ms.
HOLD function.

Safety Test Section

Continuity test (200mA) of protective conductors.
Insulation Resistance measurement (500V DC).
Trip-out time of RCD type AC Standard with test current of 30mA, 30 x 5mA, 100mA, 300mA.
Global Earth Resistance with RCD tripping.
Phase sequence indication at 1 or 2 wires.
Phase coincidence indication at 1 or 2 wires.
Leakage current (with HT96U optional clamp + NOCANBA connector).
AUTOTEST function: automatic sequence test of Global Earth Resistance + RCD test + Insulation test with OK, NOT OK indicates LAN SECTION..

LAN Section

Test executed on twisted pair cables UTP and STP with RJ45 connector.
Wire mapping control of following conditions: OPEN, SHORT, CROSS, REVERSE, SPLIT, MISWIRE message at display.
Quick selection of cable pairs.
Automatic detection of remote control units (from #1 to #8).
AutoPower OFF.
Low battery indication

Included Accessories

HT4003: 400A AC Current clamps.
C2075: Two terminal cable with SHUKO plug.
KIT0075: Set of 2 cables with test leads + 2 alligator clips.
N^o2 Remote identifier #1, #2.
N^o3 Patch cables, 30cm, RJ45 connectors.
BORSA75: carrying bag.
Calibration certificate ISO9000.
Instruction manual.
Warranty card.

Optional Accessories

HT96U 1-100-1000A/1V leakage current clamp (jaw opening 54mm max. dia.).
NOCANBA adapter (for connection to HT96U clamp).
REM38 No.6 Remote identifier unit #3, #4, #5, #6, #7, #8.
REM3 remote unit #3 + connection cable RJ45-RJ45.
REM4 remote unit #4 + connection cable RJ45-RJ45.
REM5 remote unit #5 + connection cable RJ45-RJ45.
REM6 remote unit #6 + connection cable RJ45-RJ45.
REM7 remote unit #7 + connection cable RJ45-RJ45.
REM8 remote unit #8 + connection cable RJ45-RJ45.

General Specifications
Display	Dual numeric, 9999 counts (73mm x 73mm)
Display Update	2 times/second

Conversion	16 Bit, AC True RMS
Sample Frequency	64 samples/period

Insulation	class 2 (double insulation)
Pollution Degree	2
Overvoltage Category	CAT III 550V AC Phase to Ground CAT III 550V AC Phase to Phase

Reference Standards	CE mark
	EN 61557-4 Continuity Test
	EN 61557-2 Insulation Resistance
	EN 61557-5 Earth Resistance
	EN 61557-6 RCD Test
	EN 61326 EMC Standards
	EN 61008
	EN 61009

Power Supply	4 x 1.5 Volt type ‘AA’ alkaline batteries LR6, AM3, MN 1500
Dimensions	240mm (L) x 100mm (W) x 45mm (D)
Weight	approx. 630g (including batteries)

The post HT ITALIA M75 Multitest True-RMS AC DMM & LAN Tester appeared first on Obiat Electronics.

TENMARS TM-901N LAN Cable Tester

Mike — Mon, 29 Feb 2016 19:31:38 +0000

The Tenmars TM-901N has a backlit LCD screen displays graph wire-map, opens, shorts, miswires, split pairs and the remote ID number all on one screen. Using multiple remote ID up to 8 locators to test on RJ-45 (UTP, STP) LAN cable.

Safety Precaution

Do not operate the meter under the environment with explosive gas (material), combustible gas (material) steam or filled with dust. z In order to avoid reading incorrect data, please replace the battery immediately when the symbol “ ” appears on the LCD.

In order to avoid the damage caused by contamination or static electricity, do not touch the circuit board before you take any adequate action.

Operating Environment: Indoors use. This instrument has been designed for being used in an environment of pollution degree 2.

Operation Altitude: Up to 2000M. z EMC: EN61326-1(2006), IEC 61000-4-2(2008, IEC 61000-4-3(2006) + (2007).

The verifier does the following:

Detects opens, shorts, miswires and split pairs on twisted pair cabling.

Displays graph wiremap , opens, shorts, miswires, split pairs, and the remote ID number all on one screen.

Identify remote ID number only one pair.

Measures length.

Using multiple remote ID up to 8 locators.

Low battery detector “ ”.

Auto backlight. z Auto power off

Battery Replacement

Turn off the meter and disconnect all test leads before replacing the battery. Use only the correct type of batteries, properly installed in the case, to power the meter.

Options and Accessories Consumers can order options and accessories as follows： Remote ID Locator Kit, numbers 2-8.

End of life Caution: this symbol indicates that equipment and its accessories shall be subject to a separate collection and correct disposal

The post TENMARS TM-901N LAN Cable Tester appeared first on Obiat Electronics.

HT ITALIA 6050MARKER0204 Remote Unit Set

Mike — Mon, 29 Feb 2016 06:46:02 +0000

By using remote units #2, #3, #4 with the HT-6050 Wire Map Tester up to 4 numbered remote units it’s also possible to quickly detect the connection between the RJ45 sockets located in the working rooms and the ones located on the transposition panel or on the HUB.

The post HT ITALIA 6050MARKER0204 Remote Unit Set appeared first on Obiat Electronics.

HT ITALIA QUICKLAN6050 Wire Map Tester

Mike — Mon, 29 Feb 2016 06:37:40 +0000

The HT Italia QUICKLAN6050 quickly and easily performs wire mapping tests and length measurements on LAN networks twisted pair cables (UTP, STP, FTP type) with RJ45 connectors according to EIA/TIA 568B. It signals any incorrect connections, such as crossed, split, inverted couples, etc., and can detect problems with the cable itself including open circuits and short circuits saving test results inside it’s internal memory. The HT Italia QUICKLAN6050 can also undertake testing of BNC coaxial cables. By using up to 4 numbered remote units it is also possible to quickly detect the connection between the RJ45 sockets located in the network, and the ones located on the transposition panel or on the hub.

Features:

Testing of LAN cable UTP, FTP, STP with RJ45 connectors
Testing of BNC coaxial cables
Detection errors including open, short, reversed, crossed, split couples
Error message function on display
Length measurements of cables up to 350m
Detection of up to 4 remote units
Internal memory for saving test results
Auto power off

Product Description

Test on LAN cable UTP, FTP, STP with RJ45 connector
Test on BNC coax cables
Detection error: open, short, reversed, crossed, splitted couples
Error message at display
Lenght measurements of cables up to 350m
Detection up to 4 remote units
Internal memory for saving test
Auto Power OFF

Accessories

STANDARD

Remote unit #1
Patch cable RJ45, FTP, 20cm, 2 pcs
Carrying bag
Batteries
User manual

Optional accessories:

6050MARKER0204: Remote units #2, #3, #4

The post HT ITALIA QUICKLAN6050 Wire Map Tester appeared first on Obiat Electronics.