Flir CM42 Clamp Meter Features:
- Accu-Tip enables more accurate amperage measurements on smaller- gauged wires
- MAX/MIN/AVG recording, and frequency and diode measurement
- Data hold, zero function, and low pass filter for voltage measurement
- Durable to withstand a 1-meter drop, and operates at -10 to 50°C
- Large, bright backlit display makes readings easy to see
- Tough, over-molded, easy-to-grip design and slim size
- Built to accept up to a 30mm max conductor
- Electrical field detection determines if voltage is present and the relative strength of the field for safety
- True RMS professional clamp meters
AccuTip™ Technology
You may not have heard of AccuTip™ technology but that is just because it is brand new in this device. Small gauge wire measurements have never been more accurate. We’re talking to a tenth of a digit. And MAX/MIN/AVG recording, that just comes standard. Electrical field detection, easy to grip design, and able to withstand a two metre drop.
| Flir CM42 Specifications | ||
| Measurements | Basic Accuracy | |
| DC Voltage | 600 V | ±1.0% |
| AC Voltage (Digital Low Pass Filter) | 600 V | ±1.0% |
| Clamp-On AC Current (50-100 Hz) | 400 A | ±1.8% |
| (100-400 Hz ) | ±2.0% | |
| Accu-Tip Clamp-On AC Current | 60 A | ±1.5% |
| Frequency | 50-400 Hz | ±1.0% |
| Resistance | 60 kΩ | ±1.0% |
| Diode | 2.0 V | ±2.0% |
| General Meter | ||
| Display | 6000 counts | |
| Operating Temperature | -10°C to 50°C | |
| Continuity | 10Ω< & < 250Ω | |
| Recording | Min / Max / Avg | |
| Backlight LCD | Yes | |
| Drop Test | 2m | |
| Certifications | UL , CE | |
| Category | CAT IV: 300V / CAT III 600V | |
| Jaw Opening | 30 mm Max | |
| NCV | Yes | |
| Warranty | Limited Lifetime | |
| Battery Type | 2x AAA | |
Reviews
There are no reviews yet.